November 2014 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 907495] New: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed)
by bugzilla_noreply＠novell.com 26 Aug '22

26 Aug '22

http://bugzilla.opensuse.org/show_bug.cgi?id=907495 Bug ID: 907495 Summary: adding a manual route to a dhcp configured interface results in failed dhcp setup (wicked managed) Classification: openSUSE Product: openSUSE 12.3 Version: Final Hardware: Other OS: openSUSE 13.2 Status: NEW Severity: Major Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: hpj(a)urpla.net QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When adding a manual route to a dhcp configured eth interface managed by wicked, the dhcp setup fails with a silly message: device enp7s0 failed: "call to org.opensuse.Network.Addrconf.ipv4.static.requestLease failed: General failure" Add a manual route to a dhcp configured interface and restart your system. Be prepared, that this interface will not come up correctly. BTW: the routing editor allows selecting configured interfaces only. The usual order is: setup interface, add route, but you have to confirm the interface setup first, reenter yast network and add the interface based route there after. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 899330] New: Interfaces does not automatically show up in firewall with NetworkManager
by bugzilla_noreply＠novell.com 05 Jun '22

05 Jun '22

http://bugzilla.opensuse.org/show_bug.cgi?id=899330 Bug ID: 899330 Summary: Interfaces does not automatically show up in firewall with NetworkManager Classification: openSUSE Product: openSUSE Factory Version: 201408* Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: razirazo_90(a)live.com.my QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- When using NetworkManager, network interfaces does not listed in firewall. I have to manually configure it using Wicked Service first, to make it registered in firewall. And then use networkManager back. This is troublesome, for example when setting up internet sharing you can't proceed to zone assign and Network masquerade until you do the step above. -- You are receiving this mail because: You are on the CC list for the bug.

2 10

[Bug 906594] New: Apper showing wrong package description
by bugzilla_noreply＠novell.com 17 Feb '22

17 Feb '22

http://bugzilla.opensuse.org/show_bug.cgi?id=906594 Bug ID: 906594 Summary: Apper showing wrong package description Classification: openSUSE Product: openSUSE Factory Version: NO 13.2 BUGS!! Hardware: x86-64 OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications Assignee: kde-maintainers(a)suse.de Reporter: erwin.vandevelde(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Apper shows the package's description when clicking on it, but only for the first package you click on this is done correctly. Apper shows the same description again and again for each other package you click on. Versions: apper 0.9.1-2.1 -- You are receiving this mail because: You are on the CC list for the bug.

2 1

[Bug 902583] New: Thunderbird fails to connect when launched before Internet connection is up
by bugzilla_noreply＠novell.com 09 Sep '21

09 Sep '21

http://bugzilla.opensuse.org/show_bug.cgi?id=902583 Bug ID: 902583 Summary: Thunderbird fails to connect when launched before Internet connection is up Classification: openSUSE Product: openSUSE Distribution Version: 13.2 RC 1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Firefox Assignee: bnc-team-mozilla(a)forge.provo.novell.com Reporter: sb56637(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hi, I have noticed that if I launch Thunderbird before my network connection is up (NetworkManager WiFI connection), it will fail to connect even after the network comes up. The only way to make it connect is by closing all instances and restarting Thunderbird. This appears to be related to Bug 90258. Thanks for looking into this! -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 899501] New: Only one display wakes up after powersave
by bugzilla_noreply＠novell.com 03 Aug '21

03 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=899501 Bug ID: 899501 Summary: Only one display wakes up after powersave Classification: openSUSE Product: openSUSE Factory Version: 201409* Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: X.Org Assignee: bnc-team-xorg-bugs(a)forge.provo.novell.com Reporter: lmb(a)suse.com QA Contact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- Created attachment 608781 --> http://bugzilla.suse.com/attachment.cgi?id=608781&action=edit Xorg.0.log I have a Lenovo Thinkpad T440s with Intel graphics. I'm using a dual monitor setup - the internal 1920x1080 display on eDP1 and a 1920x1200 screen (HP ZR24w on DP4 via the docking station). (Running Factory as of now, but tried 13.2b1 yesterday and had the same effect.) Leaving the system alone for a bit leads to the screens being turned off (powersave). However, only the internal display wakes up again; the external output remains in power-save mode. (e.g., the monitor doesn't find any signal on any port.) I tried using xrandr --output --off and turning it on with --auto again, turning off the monitor itself, etc. No change; the only apparent way to resolve this and get my external monitor back is to reboot, which seems a bit harsh. Any suggestions? 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 32767 x 32767 eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 175mm 1920x1080 60.01*+ 1400x1050 59.98 1280x1024 60.02 1280x960 60.00 1024x768 60.00 800x600 60.32 56.25 640x480 59.94 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis) DP4 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 546mm x 352mm 1920x1200 59.95*+ 1920x1080 59.99 1600x1200 60.00 1680x1050 59.95 1280x1024 60.02 1440x900 59.89 1280x960 60.00 1024x768 60.00 800x600 60.32 640x480 60.00 DP5 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Pl -- You are receiving this mail because: You are on the CC list for the bug.

2 4

[Bug 901887] New: Lenovo t440s / Intel 4400: External display non-functional
by bugzilla_noreply＠novell.com 03 Aug '21

03 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=901887 Bug ID: 901887 Summary: Lenovo t440s / Intel 4400: External display non-functional Classification: openSUSE Product: openSUSE Factory Version: 201410* Hardware: x86-64 OS: Other Status: NEW Severity: Major Priority: P5 - None Component: X.Org Assignee: bnc-team-xorg-bugs(a)forge.provo.novell.com Reporter: lmb(a)suse.com QA Contact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: --- Blocker: --- Created attachment 610633 --> http://bugzilla.suse.com/attachment.cgi?id=610633&action=edit Xorg.0.log On the same system where I experienced bug 899501, I've updated the system to a later Factory build and can now no longer activate my external display at all. Though xrandr reports: Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 32767 x 32767 eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 175mm 1920x1080 60.01*+ 1400x1050 59.98 1280x1024 60.02 1280x960 60.00 1024x768 60.00 800x600 60.32 56.25 640x480 59.94 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis) DP4 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 546mm x 352mm 1920x1200 59.95*+ 1920x1080 59.99 1600x1200 60.00 1680x1050 59.95 1280x1024 60.02 1440x900 59.89 1280x960 60.00 1024x768 60.00 800x600 60.32 640x480 60.00 DP5 disconnected (normal left inverted right x axis y axis) The output on DP4 is black, and the monitor does not detect a signal. -- You are receiving this mail because: You are on the CC list for the bug.

2 6

[Bug 903189] New: USB trackball not detected on reboot
by bugzilla_noreply＠novell.com 03 Aug '21

03 Aug '21

http://bugzilla.suse.com/show_bug.cgi?id=903189 Bug ID: 903189 Summary: USB trackball not detected on reboot Classification: openSUSE Product: openSUSE Factory Version: 201410* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-maintainers(a)forge.provo.novell.com Reporter: lmb(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 611775 --> http://bugzilla.suse.com/attachment.cgi?id=611775&action=edit lsusb -v directly after reboot After a reboot, the kernel doesn't detect the USB attached trackball automatically. I have to unplug and plug it in again. I'm attaching lsusb output directly after a reboot and after the unplug/plug step (to the same USB port). Note that it is attached to a port on the docking station. -- You are receiving this mail because: You are on the CC list for the bug.

2 2

[Bug 905418] New: No audio/no sound when headphone is plugged in -- choosing "Headphones (unplugged)" in pavucontrol then works
by bugzilla_noreply＠novell.com 28 May '21

28 May '21

http://bugzilla.suse.com/show_bug.cgi?id=905418 Bug ID: 905418 Summary: No audio/no sound when headphone is plugged in -- choosing "Headphones (unplugged)" in pavucontrol then works Classification: openSUSE Product: openSUSE Factory Version: 201411* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound Assignee: tiwai(a)suse.com Reporter: gp(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 613619 --> http://bugzilla.suse.com/attachment.cgi?id=613619&action=edit Screenshot showing pavucontrol vs GNOME Sound panel when external jack is unplugged This is an interesting one, current Factory with kernel 3.16.4-1.g7a8842b-default (and before that also with kernel-default-3.17.1-1.2.g5c4d099 I believe). Sounds on this Lenovo T430s notebook works just fine. Except when I plug in speakers or a headset, instead of switching off the internal speakers and activating that external audio -- silence. The GNOME Sound panel provides no way to address this. pavucontrol, however shows "Headphones (unplugged)", and when I select that as Output Device, everything works as it used to (with 13.1, 13.2 and Factory until a few days ago). 14: PCI 1b.0: 0403 Audio device [Created at pci.328] Unique ID: u1Nb.0TDI6CRLz81 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 7 Series/C210 Series Chipset Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1e20 "7 Series/C210 Series Chipset Family High Definition Audio Controller" SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x21fb Revision: 0x04 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf2530000-0xf2533fff (rw,non-prefetchable) IRQ: 46 (1867 events) Module Alias: "pci:v00008086d00001E20sv000017AAsd000021FBbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 899104] New: KDE complains about X-KDE-Library from yast desktop files
by bugzilla_noreply＠novell.com 07 Jan '21

07 Jan '21

http://bugzilla.suse.com/show_bug.cgi?id=899104 Bug ID: 899104 Summary: KDE complains about X-KDE-Library from yast desktop files Classification: openSUSE Product: openSUSE Factory Version: 201409* Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 Assignee: yast2-maintainers(a)suse.de Reporter: lnussel(a)suse.com QA Contact: jsrain(a)suse.com Found By: --- Blocker: --- See https://openqa.opensuse.org/tests/25123/file/XSE KDE complains about the X-KDE-Library entries in yast's desktop files. -- You are receiving this mail because: You are on the CC list for the bug.

2 7

[Bug 904210] New: package link not shown in web UI
by bugzilla_noreply＠novell.com 24 Jun '20

24 Jun '20

http://bugzilla.opensuse.org/show_bug.cgi?id=904210 Bug ID: 904210 Summary: package link not shown in web UI Classification: openSUSE Product: openSUSE.org Version: unspecified Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService Assignee: bnc-team-screening(a)forge.provo.novell.com Reporter: nico.kruber(a)gmail.com QA Contact: adrian(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:33.0) Gecko/20100101 Firefox/33.0 Build Identifier: if repo B is based on repo A which contains package C, then linking to B:C (without C being directly available in B) produces no UI elements to show (un)expanded sources in the web UI, neither is the link shown as such ("links to ...") example: https://build.opensuse.org/package/show/KDE:Extra/PackageKit https://build.opensuse.org/package/show/KDE:Extra/PackageKit?expand=0 https://build.opensuse.org/package/show/KDE:Extra/PackageKit?expand=1 Reproducible: Always Steps to Reproduce: 1. create link to a package in openSUSE:13.2:Update which is only available in openSUSE:13.2 2. browse to that link Actual Results: the link exists but is not shown as such Expected Results: same UI as if the package was linked to openSUSE:13.2 directly -- You are receiving this mail because: You are on the CC list for the bug.

2 2