October 2013 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 838038] New: libmysqlcppconn-devel should depend on boost-devel
by bugzilla_noreply＠novell.com 20 Sep '17

20 Sep '17

https://bugzilla.novell.com/show_bug.cgi?id=838038 https://bugzilla.novell.com/show_bug.cgi?id=838038#c0 Summary: libmysqlcppconn-devel should depend on boost-devel Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: erwin.vandevelde(a)gmail.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/31.0.1611.0 Safari/537.36 SUSE/31.0.1611.0 When using libmysqlcppconn-devel without boost-devel, following compile time error occurs: /usr/include/cppconn/connection.h:31:29: fatal error: boost/variant.hpp: No such file or directory Installing boost-devel fixes this. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 847406] New: in virtualbox VM: reconfig of dual nic vm fails, eth0 becomes rename2, eth1 not configured or visible, eth0 not configured. perhaps something with double mac address ?
by bugzilla_noreply＠novell.com 08 Sep '17

08 Sep '17

https://bugzilla.novell.com/show_bug.cgi?id=847406 https://bugzilla.novell.com/show_bug.cgi?id=847406#c0 Summary: in virtualbox VM: reconfig of dual nic vm fails, eth0 becomes rename2, eth1 not configured or visible, eth0 not configured. perhaps something with double mac address ? Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: openSUSE 12.3 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: rens.groenewegen(a)xs4all.nl QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=564757) --> (http://bugzilla.novell.com/attachment.cgi?id=564757) yast2 log User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Firefox/24.0 I cloned the VM from node1 into node2 with virtualbox. I did forget to check the re-initialize MAC address. Eth0 is configured with dhcp and is configured properly. when i try to configure the eth1, it fails without yast saying so. worse, I now have a rename2 which has the config of eth0, eth0 is vaporized and eth1 is not initalized...... The same happened with a second clone. Reproducible: Always Steps to Reproduce: 1.see above 2. 3. Actual Results: when i try to configure the eth1, it fails without yast saying so. worse, I now have a rename2 which has the config of eth0, eth0 is vaporized and eth1 is not initalized...... Expected Results: should have configured eth1 and leave eth0 alone. if the double mac address is the problem, then it should have refused to configure eth1, report that to the user and in all cases, leave eth0 alone. btw, rename2 interface does work..... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 819066] New: Cannot enter "kwallet" nor "ssh" key during logon with "ssh-add" turn on in "/etc/X11/xinit/xinitrc"
by bugzilla_noreply＠novell.com 30 Aug '17

30 Aug '17

https://bugzilla.novell.com/show_bug.cgi?id=819066 https://bugzilla.novell.com/show_bug.cgi?id=819066#c0 Summary: Cannot enter "kwallet" nor "ssh" key during logon with "ssh-add" turn on in "/etc/X11/xinit/xinitrc" Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: openSUSE 12.3 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: DOlsson(a)WEB.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:20.0) Gecko/20100101 Firefox/20.0 After having activated (i.e. removed the '#' comments in lines 48-50 in "/etc/X11/xinit/xinitrc") the call of "ssh-add", I am not able to enter neither the "kwallet" key (for which I am first asked for) nor the "ssh" key (which is asked for afterwards). The reason for this is that the keyboard is no active anymore. I am able to use the mouse to select the input field, but nothing that I try to type gets entered, nor can I move the focus from the input field to one of the buttons using the <TAB> key! Reproducible: Always Steps to Reproduce: 1. Install a fresh openSUSE 12.3 using KDE as desktop. 2. Edit the "/etc/X11/xinit/xinitrc" removing the '#' comments, thus enabling the call of "ssh-add" during logon. 3. Create a "ssh" key for the user. 4. Create a "kwallet" to keep the keys in. Actual Results: Unable to use the keyboard to enter the asked for keys. Expected Results: When the "kwallet" and "ssh-add" applications shows their pop-up windows, the input field should be selected and the keyboard focus should have been activated, thus allowing for the entering of the asked for keys. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 730327] New: vusb-analyzer needs 'gnomecanvas'
by bugzilla_noreply＠novell.com 27 Aug '17

27 Aug '17

https://bugzilla.novell.com/show_bug.cgi?id=730327 https://bugzilla.novell.com/show_bug.cgi?id=730327#c0 Summary: vusb-analyzer needs 'gnomecanvas' Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: afaerber(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- On openSUSE 12.1 RC2, `vusb-analyzer` resulted in: Traceback (most recent call last): File "/usr/bin/vusb-analyzer", line 13, in <module> from VUsbTools import Views, Log, Diff, Decode File "/usr/lib/python2.7/site-packages/VUsbTools/Views.py", line 15, in <module> from VUsbTools import Types, Style File "/usr/lib/python2.7/site-packages/VUsbTools/Types.py", line 20, in <module> except gnomecanvas: NameError: name 'gnomecanvas' is not defined Installing python-gnome package resolved this. A suitable Depends: should be added to the vusb-analyzer package. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 789020] New: no more /dev/disk/by-label/LABEL symlinks for LVM devices (udev/systemd?)
by bugzilla_noreply＠novell.com 18 Aug '17

18 Aug '17

https://bugzilla.novell.com/show_bug.cgi?id=789020 https://bugzilla.novell.com/show_bug.cgi?id=789020#c0 Summary: no more /dev/disk/by-label/LABEL symlinks for LVM devices (udev/systemd?) Classification: openSUSE Product: openSUSE Factory Version: 12.3 Milestone 1 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: seife(a)novell.slipkontur.de QAContact: qa-bugs(a)suse.de Found By: Third Party Developer/Partner Blocker: --- After updating to today's FACTORY (last update was before openSUSE conf), my /space and /local partitions were no longer mounted: susi:~ # grep LABEL /etc/fstab LABEL=root-FACTORY / ext4 acl,user_xattr 1 1 # LABEL=local /local xfs noatime,logbufs=8,logbsize=262144 1 2 # LABEL=space /space xfs noatime,logbufs=8,logbsize=262144 1 2 (now commented out to get the system to boot) susi:~ # l /dev/disk/by-label/ total 0 drwxr-xr-x 2 root root 140 Nov 9 15:50 ./ drwxr-xr-x 6 root root 120 Nov 9 15:50 ../ lrwxrwxrwx 1 root root 10 Nov 9 15:50 BOOTLOADER -> ../../sda3 lrwxrwxrwx 1 root root 10 Nov 9 15:50 SYSTEM_DRV -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 9 15:50 Windows7_OS -> ../../sda2 lrwxrwxrwx 1 root root 10 Nov 9 15:50 root-FACTORY -> ../../sda6 lrwxrwxrwx 1 root root 10 Nov 9 15:50 root-stable -> ../../sda8 susi:~ # blkid /dev/sda1: LABEL="SYSTEM_DRV" UUID="7A0615220614E0C5" TYPE="ntfs" /dev/sda2: LABEL="Windows7_OS" UUID="64A42A12A429E6F0" TYPE="ntfs" /dev/sda3: LABEL="BOOTLOADER" UUID="519614e1-7c40-4866-b461-3ad4cb797538" SEC_TYPE="ext2" TYPE="ext3" /dev/sda5: UUID="fde71608-8ca9-4f2a-9a3e-501df23f8469" TYPE="swap" /dev/sda6: LABEL="root-FACTORY" UUID="71f5bfb4-3d29-4c9c-929a-3fb795cf0fd9" TYPE="ext4" /dev/sda7: UUID="3387ae99-507c-41eb-80c8-ee7b4a62353a" TYPE="crypto_LUKS" /dev/sda8: LABEL="root-stable" UUID="6983d635-99c0-48e9-b62a-74cd3b27c636" TYPE="ext4" /dev/sda9: UUID="jRlUY0-8mt0-09TE-MeAf-IqRj-TSzl-tK83Uk" TYPE="LVM2_member" /dev/mapper/main-local: LABEL="local" UUID="ac293f98-8e30-440f-8845-d067ee49d42d" TYPE="xfs" /dev/mapper/main-space: LABEL="space" UUID="17676f0d-fe6e-4b47-80bb-6d6493574569" TYPE="xfs" /dev/mapper/main-vdr: UUID="4b5b5706-84bb-4a2c-8f91-fda2784aea86" TYPE="ext4" /dev/mapper/cr_sda7: LABEL="cryptohome" UUID="98741ffb-5913-43ca-afac-500ff16d0f57" TYPE="ext3" susi:~ # blkid|grep LABEL= /dev/sda1: LABEL="SYSTEM_DRV" UUID="7A0615220614E0C5" TYPE="ntfs" /dev/sda2: LABEL="Windows7_OS" UUID="64A42A12A429E6F0" TYPE="ntfs" /dev/sda3: LABEL="BOOTLOADER" UUID="519614e1-7c40-4866-b461-3ad4cb797538" SEC_TYPE="ext2" TYPE="ext3" /dev/sda6: LABEL="root-FACTORY" UUID="71f5bfb4-3d29-4c9c-929a-3fb795cf0fd9" TYPE="ext4" /dev/sda8: LABEL="root-stable" UUID="6983d635-99c0-48e9-b62a-74cd3b27c636" TYPE="ext4" /dev/mapper/main-local: LABEL="local" UUID="ac293f98-8e30-440f-8845-d067ee49d42d" TYPE="xfs" /dev/mapper/main-space: LABEL="space" UUID="17676f0d-fe6e-4b47-80bb-6d6493574569" TYPE="xfs" /dev/mapper/cr_sda7: LABEL="cryptohome" UUID="98741ffb-5913-43ca-afac-500ff16d0f57" TYPE="ext3" As you can see, the non-LVM devices are there in /dev/disk/by-label, but the LVM devices are not. I guess this is a glitch of the new udev version. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 770239] New: 'zypper pa' lacks support for @System repo
by bugzilla_noreply＠novell.com 12 Aug '17

12 Aug '17

https://bugzilla.novell.com/show_bug.cgi?id=770239 https://bugzilla.novell.com/show_bug.cgi?id=770239#c0 Summary: 'zypper pa' lacks support for @System repo Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: zypp-maintainers(a)forge.provo.novell.com ReportedBy: ma(a)suse.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- ma@fibonacci:~ (0) $ zypper pa -i -R|grep libclucene-core0_9_23 ma@fibonacci:~ (1) $ zypper pa -R|grep libclucene-core0_9_23 ma@fibonacci:~ (1) $ zypper info libclucene-core0_9_23 Loading repository data... Reading installed packages... Information for package libclucene-core0_9_23: Repository: @System Name: libclucene-core0_9_23 ... ma@fibonacci:~ (0) $ zypper pa @System Repository '@System' not found by its alias, number, or URI. Use 'zypper repos' to get the list of defined repositories. --- In this case libclucene-core0_9_23 is orphaned (installed but not avaliable in any repo). 'pa' is a kind of search and search should support something like '-r @System'. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 624196] New: Request for opencv to be built with TBB support
by bugzilla_noreply＠novell.com 05 Aug '17

05 Aug '17

http://bugzilla.novell.com/show_bug.cgi?id=624196 http://bugzilla.novell.com/show_bug.cgi?id=624196#c0 Summary: Request for opencv to be built with TBB support Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Macintosh OS/Version: openSUSE 11.2 Status: NEW Severity: Enhancement Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alexjironkin(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.9.2.7) Gecko/20100714 SUSE/3.6.7-1.1 Firefox/3.6.7 Since version OpenCV 2.1, which comes as part of the base packages now in 11.3 I think, OpenMP has been replaced by TBB. However OpenCV buid without that support on opensuse 11.2. Using TBB will greatly enhance all application using OpenCV e.g. digikam. Reproducible: Always Steps to Reproduce: 1. 2. 3. The request is to have either a separate package or enable OpenCV with TBB. Ubuntu 10.4 packages already do that so its stable enough to work with. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 785437] New: openSUSE:12.2/freerdp: Bug
by bugzilla_noreply＠novell.com 04 Aug '17

04 Aug '17

https://bugzilla.novell.com/show_bug.cgi?id=785437 https://bugzilla.novell.com/show_bug.cgi?id=785437#c0 Summary: openSUSE:12.2/freerdp: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: 3rd party software AssignedTo: gber(a)opensuse.org ReportedBy: bruno(a)ioda-net.ch QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- With new version and certainly linked to the "hack" of shared lib Trying to launch an xfreerdp connection on a remote win7-64 working machine ( still accessible with xfreerdp 0.8.2 & openSUSE 12.1) There's now a error message me@linux:~> /usr/bin/xfreerdp -z -a 32 -k 0x0000100C --plugin cliprdr --plugin rdpsnd --gdi hw --rfx --ignore-certificate --no-nla -0 -g 1300x700 -f -n me.local -u administrator -d test2012-64 test2012-64 loading plugin cliprdr loading plugin rdpsnd connected to test2012-64:3389 /usr/bin/xfreerdp: symbol lookup error: /usr/lib64/libfreerdp-1_0/rdpsnd_pulse.so: undefined symbol: pa_threaded_mainloop_new Please verify, thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 22

[Bug 810239] New: midnight commander makes zfs-fuse userland not responding for approx. 30 min
by bugzilla_noreply＠novell.com 31 Jul '17

31 Jul '17

https://bugzilla.novell.com/show_bug.cgi?id=810239 https://bugzilla.novell.com/show_bug.cgi?id=810239#c0 Summary: midnight commander makes zfs-fuse userland not responding for approx. 30 min Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kaspernasebaer(a)gmx.de QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=530394) --> (http://bugzilla.novell.com/attachment.cgi?id=530394) tail of strace log when mc hangs User-Agent: Opera/9.80 (Windows NT 6.1; WOW64) Presto/2.12.388 Version/12.14 When browsing huge datasets (>1TB) by using midnight commander, in some cases zfs-fuse userland is not responding anymore for some period of time (approx. 30min) and then recovers without any error messages in the logs. "# ls /pool" or "# zfs list" dont show any result and may be aborted by ctrl+C. Samba shares on the zfs volume are not accessible. Reproducible: Sometimes Steps to Reproduce: 1. create zfs-fuse pool containing a certain amount data and directories (~>1TB) 2. use midnight commander and navigate through directories 3. Sometimes the zfs-fuse filesystem stops responding. Actual Results: Midnight commander just "hangs" for a longer period of time and then continues without any error messages. The zfs-fuse driver remains active approx. 3.5% CPU. The hard disc drives do not appear to be busy during hang. Running midnight commander by strace shows that it appears to be calling "stat" and is just waiting for the result for approx. 30 min and then continues without showing any error. Expected Results: No hang or at least report an error/timeout. My impression is that this usually happens shortly after "chdir" is issued. I have added the tail of some strace output when running midnight commander. We are experiencing this bug on two different machines, both are 64bit and multi core and have 12-48GB of memory. One machine is using local discs, the other one is using an iSCSI device. The datasets are between 2TB and 48TB. No dedup and no compression is used. Updating to the most recent software from the openSuSE repos did not solve the problem. Shutting down and starting the zfs-fuse daemon of the 2TB dataset on local drives sometimes takes some period of time (1-2h) which appears quite long. Strangely, we were _not_ able to trigger this bug by running multiple processes in parallel like kernel builds or e.g. "find /pool -type d -exec ls -la '{}' \; >> /dev/null ; " or "find /pool -type f -exec stat '{}' \; >> /dev/null " or by using bonnie++. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 842998] New: Midnight Commander doesn't have an icon on the GNOME Activities overlay
by bugzilla_noreply＠novell.com 31 Jul '17

31 Jul '17

https://bugzilla.novell.com/show_bug.cgi?id=842998 https://bugzilla.novell.com/show_bug.cgi?id=842998#c0 Summary: Midnight Commander doesn't have an icon on the GNOME Activities overlay Classification: openSUSE Product: openSUSE Factory Version: 13.1 Beta 1 Platform: VMWare OS/Version: Windows 7 Status: NEW Severity: Minor Priority: P5 - None Component: Usability AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: danilo.cominotti(a)outlook.com QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created an attachment (id=560690) --> (http://bugzilla.novell.com/attachment.cgi?id=560690) Screenshot of Midnight Commander entries on the GNOME Activities Overlay User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.66 Safari/537.36 When I scroll down to the second page of applications from the GNOME Activities overlay, Midnight Commander doesn't have any icon -- there's just its text label. If I right-click it and choose "Add to Favorites", there also won't be an icon on the left side of the overlay. Reproducible: Always Steps to Reproduce: 1. Launch the GNOME Activities overlay. 2. Click "Show Applications" on the left side. 3. Scroll down to the second page. 4. See the entry for Midnight Commander. Actual Results: There is no icon for Midnight Commander. Also, if I right-click it and choose "Add to Favorites", there won't be an icon on the favorites bar on the left side of the overlay. Expected Results: An icon for Midnight Commander should be displayed on the GNOME Activities overlay. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2