June 2012 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 747783] New: systemd: 'service openvpn start' triggers spamming of all terminals
by bugzilla_noreply＠novell.com 11 Apr '17

11 Apr '17

https://bugzilla.novell.com/show_bug.cgi?id=747783 https://bugzilla.novell.com/show_bug.cgi?id=747783#c0 Summary: systemd: 'service openvpn start' triggers spamming of all terminals Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gp(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:10.0) Gecko/20100101 Firefox/10.0 1. become root 2. # service openvpn start 3. Watch as every terminal will be spammed with something like Broadcast message from root(a)trevally.site (Fri, 17 Feb 2012 17:28:14 +0100): Password entry required for 'Enter Auth Username:' (PID 17770). Please enter password with the systemd-tty-ask-password-agent tool! This does not make any sense since I am already in the terminal with the prompt; why bother all other terminals? Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 19

[Bug 755603] New: The gnome keyring socket is not owned with the same credentials as the user login
by bugzilla_noreply＠novell.com 11 Mar '17

11 Mar '17

https://bugzilla.novell.com/show_bug.cgi?id=755603 https://bugzilla.novell.com/show_bug.cgi?id=755603#c0 Summary: The gnome keyring socket is not owned with the same credentials as the user login Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: mvyskocil(a)suse.com QAContact: qa-bugs(a)suse.de CC: vuntz(a)suse.com, vcizek(a)suse.com Found By: Development Blocker: --- Created an attachment (id=484752) --> (http://bugzilla.novell.com/attachment.cgi?id=484752) copy the credential checking code from git.gnome.org Running command via sudo fills my log errors as appears in $SUBJECT $ sudo ls Password: xxxx and then log contains following Apr 4 10:20:01 zelva sudo: The gnome keyring socket is not owned with the same credentials as the user login: /run/user/mvyskocil/keyring-5MIqXs/control Apr 4 10:20:01 zelva sudo: gkr-pam: couldn't unlock the login keyring. Apr 4 10:20:01 zelva sudo: mvyskocil : TTY=pts/5 ; PWD=/home/mvyskocil ; USER=root ; COMMAND=/usr/bin/ls Apr 4 10:20:01 zelva systemd[1]: Got D-Bus request: org.freedesktop.DBus.NameOwnerChanged() on /org/freedesktop/DBus However that's not true $ echo $GNOME_KEYRING_CONTROL /run/user/mvyskocil/keyring-5MIqXs $ ls -n $GNOME_KEYRING_CONTROL/* srwxr-xr-x 1 10112 100 0 4. dub 09.33 /run/user/mvyskocil/keyring-5MIqXs/control srwxr-xr-x 1 10112 100 0 4. dub 09.33 /run/user/mvyskocil/keyring-5MIqXs/gpg srwxr-xr-x 1 10112 100 0 4. dub 09.33 /run/user/mvyskocil/keyring-5MIqXs/pkcs11 srwxr-xr-x 1 10112 100 0 4. dub 09.33 /run/user/mvyskocil/keyring-5MIqXs/ssh $ id uid=10112(mvyskocil) gid=100(users) groups=100(users),10(wheel),33(video),41(xok),113(vboxusers),404(lighttpd),1194(vpn) $ id -u 10112 $ id -ru 10112 so the 10112 is my *real* id and keyring sockets are really owned by this id. $ cat /proc/$GNOME_KEYRING_PID/loginuid 10112 and even the process runs with the same uid, so there is really **no** surprise in my configuration. I did a bit more and copy the part of gnome-keyring-daemon, however even getsockopt returns the id 10112, like getuid does. $ ./creds uid=10112, geteuid()=10112 I would say the best way to debug would be patch gnome-keyring-daemon and print the values of uid and getuid on error, but I haven't a time to do that yet. BTW: as google returns most of suse related things for $SUBJ, I suspect some misconfiguration in our pam stack. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 680125] New: dlclose() can not unload all dynamic libraries
by bugzilla_noreply＠novell.com 02 Jan '17

02 Jan '17

https://bugzilla.novell.com/show_bug.cgi?id=680125 https://bugzilla.novell.com/show_bug.cgi?id=680125#c0 Summary: dlclose() can not unload all dynamic libraries Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: gotterdammerung(a)web.de QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=419657) --> (http://bugzilla.novell.com/attachment.cgi?id=419657) test program which opens a dl from cmdline, closes it and checks if it is still open User-Agent: Mozilla/5.0 (X11; U; Linux i686; de-DE; rv:1.9.2.15) Gecko/20110310 Gentoo Firefox/3.6.15 A call to dlclose() does not unload some dynamic libraries, even if the reference count drops to zero and no other loaded libraries use symbols in it. See attached test programm. Some libraries like 'pthread' exhibit this behaviour and it propagates up the dependency chain. This breaks programs which rely on reloading of affected dynamic libraries. Reproducible: Always Steps to Reproduce: 1. compile test program with 'g++ test.cpp -otest -ldl' 2. run 'for file in /usr/lib64/lib*.so; do ./test $file; done | grep failed' Actual Results: see attachment #2 Expected Results: /usr/lib64/librt.so failed. (at least that is what happens on my gentoo machine) AFAIK, x86_64 and x86 are both affected. Related: [[bugzilla:645652]] -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 622977] New: pstoedit crashes when called from inkscape
by bugzilla_noreply＠novell.com 01 Jan '17

01 Jan '17

http://bugzilla.novell.com/show_bug.cgi?id=622977 http://bugzilla.novell.com/show_bug.cgi?id=622977#c0 Summary: pstoedit crashes when called from inkscape Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gerlach(a)mbi-berlin.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.6) Gecko/20100626 SUSE/3.6.6-1.1 Firefox/3.6.6 pstoedit crashes when converting pdf to svg (used by inkscape textext) Reproducible: Always Steps to Reproduce: 1. pstoedit -f plot-svg file.pdf file.svg -dt -ssp -psarg -r9600x9600 (command used by inkscape) Actual Results: pstoedit: version 3.50 / DLL interface 108 (build Jul 5 2010 - release build - g++ 4.5.0 20100604 [gcc-4_5-branch revision 160292]) : Copyright (C) 1993 - 2009 Wolfgang Glunz Inconsistency detected by ld.so: dl-close.c: 731: _dl_close: Assertion `map->l_init_called' failed! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 22

[Bug 584970] New: Yast gives error -4017 when trying to partition using LVM
by bugzilla_noreply＠novell.com 22 Dec '16

22 Dec '16

http://bugzilla.novell.com/show_bug.cgi?id=584970 http://bugzilla.novell.com/show_bug.cgi?id=584970#c0 Summary: Yast gives error -4017 when trying to partition using LVM Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: HP OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: p.c.manning(a)swansea.ac.uk QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.89 Safari/532.5 Hardware: HP ML115 with E200 SmartArray card. 4 250GB drives built as raid 5. Use OpenSUSE DVD installer, select LVM partitioning scheme, installation dies when preparing disks with error -4017 Reproducible: Always Steps to Reproduce: 1.Use OpenSUSE 11.2 DVD 64bit to Install OS 2.Get to partitioning scheme - select LVM 3.Continue through installation, installation dies at preparing disks stage Actual Results: Retried this with text mode installer which enabled me to switch to a working shell console, I could see that the installer had created a boot partition, an LVM partition and an LVM group. But had failed to create any logical volumes Expected Results: A properly partitioned disk! http://forums.opensuse.org/install-boot-login/433990-yast-partitioning-erro… Workround was to partition manually via a shell console. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 691709] New: synergy makes cursor disapear over GVIM windows
by bugzilla_noreply＠novell.com 12 Dec '16

12 Dec '16

https://bugzilla.novell.com/show_bug.cgi?id=691709 https://bugzilla.novell.com/show_bug.cgi?id=691709#c0 Summary: synergy makes cursor disapear over GVIM windows Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: adam(a)mizerski.pl ReportedBy: jmatejek(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- this happens on the computer where synergy server is running, not sure about client to reproduce: 1. start synergy server 2. open gvim window 3. start typing in gvim window (for non-vi folk, you initiate insert mode by typing "i" or pressing Ins) 4. the mouse cursor disappears 5. stop typing and move your mouse expected behavior: mouse curshor should reappear - this is standard behavior, designed so that the cursor is hidden while typing actual behavior: the mouse cursor never reappears. if you move mouse out of gvim's window, cursor is visible, but it is invisible when positioned over the window sorry if you're not the right assignee, but you are the only active user in the X11:Utilities project and you did the last change to synergy, so... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 714551] New: Vim's ":tag" command should search corresponding header file first.
by bugzilla_noreply＠novell.com 12 Dec '16

12 Dec '16

https://bugzilla.novell.com/show_bug.cgi?id=714551 https://bugzilla.novell.com/show_bug.cgi?id=714551#c0 Summary: Vim's ":tag" command should search corresponding header file first. Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: nn.dm55(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686 on x86_64; rv:6.0) Gecko/20100101 Firefox/6.0 In a C++ project with many variables with the same name, searching for the definition of a variable mentioned in a ".cpp" file using Ctrl-] gives me the definition of an unrelated variable with the same name. The ":tag" command should prefer the definition in the corresponding header file to any other definitions to make finding the correct definition easier. Reproducible: Always Steps to Reproduce: 1. Download SuperTuxKart 2. Open src/karts/kart_model.cpp in Vim 3. Type "/::attachModel" and press Enter 4. Type "/else" and press Enter 5. Type "/m_mesh" and press Enter. 6. Hold Ctrl and press ], then release both keys Actual Results: You end up looking at the following line in src/graphics/shadow.hpp instead of src/karts/kart_model.hpp: scene::IMesh *m_mesh; Expected Results: I expected Vim to show me these line from src/karts/kart_model.hpp: scene::IAnimatedMesh *m_mesh; This bug happens even without having a .vimrc file. I am using openSUSE 11.3 64-bit. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 743548] New: opensuse wiki misses a WYSIWYG editor
by bugzilla_noreply＠novell.com 05 Dec '16

05 Dec '16

https://bugzilla.novell.com/show_bug.cgi?id=743548 https://bugzilla.novell.com/show_bug.cgi?id=743548#c0 Summary: opensuse wiki misses a WYSIWYG editor Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Wiki AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jw(a)suse.com QAContact: tschmidt(a)suse.com Blocks: 743547 Found By: --- Blocker: --- The wiki should have a WYSIWYG Editor. tinyMCE can be enabled on MediaWiki. It can also be extended to offer templates. The current editor features only a source code view, and a very limited markup support. Typical editing requires multiple Preview-Edit cycles until the results come out as intended. E.g. I myself often need a few attempts to get link target and link labels in the right order with the right seperator in between. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 680148] New: kiwi complains about no clicfs tools if there is no cdrkit compat
by bugzilla_noreply＠novell.com 23 Oct '16

23 Oct '16

https://bugzilla.novell.com/show_bug.cgi?id=680148 https://bugzilla.novell.com/show_bug.cgi?id=680148#c0 Summary: kiwi complains about no clicfs tools if there is no cdrkit compat Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: ms(a)novell.com ReportedBy: coolo(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- I wanted to create a small ISO with clicfs and kiwi complained that there are no tools for clicfs. After digging the code I figured it actually looked for mkisofs first and set the toolerror flag because it's not there. Afaik it's not even using mkisofs but genisoimage -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 688776] New: outdated midnight commander man page
by bugzilla_noreply＠novell.com 14 Oct '16

14 Oct '16

https://bugzilla.novell.com/show_bug.cgi?id=688776 https://bugzilla.novell.com/show_bug.cgi?id=688776#c0 Summary: outdated midnight commander man page Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: All OS/Version: openSUSE 11.4 Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pcerny(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- The manpage of midnight commander seems to be outdated, at least wrt the description of the skins (as compared with the default skin file shipped in the package) - it doesn't contain all recognized keywords (and some might even be not supported any more). Creating a reasonbale skinn is hence impossible. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3