May 2012 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 640407] New: SDL: erroneously uses xrandr-style mode switching
by bugzilla_noreply＠novell.com 09 Feb '18

09 Feb '18

https://bugzilla.novell.com/show_bug.cgi?id=640407 https://bugzilla.novell.com/show_bug.cgi?id=640407#c0 Summary: SDL: erroneously uses xrandr-style mode switching Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: Beta-Customer Blocker: --- Starting with 11.3, I am seeing a new issue with my "oversize" desktop (2944x2208 VirtualSize on a 1280x1024 resolution). Problem: SDL-1.2.14. When SDL switches to fullscreen 640x480 - for example, because the game is configured to run in such resolution - or back, it changes the desktop size too by means of xrandr or something along the lines of that. Actual results: Windows on my desktop are reordered, which is usually a result of the WM being forced to do so because the desktop size (virtualsize) changed. Resolution switching also takes significantly longer than it did before — this is another sign that it switches desktop size (too), not just resolution. First the screen goes black-with-backlight and after roughly 500ms, the TFT screen finally gets the new 640x480 mode signal (I use VGA), which is evidenced by the backlight going briefly off. Expected results: Previous behavior. In other worsd, leave desktop size as-is (and subsequently keep my windows where they are) and _only_ change the resolution. The old switching style is also way faster in that there is no black-with-backlight delay. Additional information: Not all programs are affected. The entire group of Doom engines exhibits the behavior for example, though I found that UnrealTournament99 does not. Both Doom and UT use libSDL-1.2.so.0 (no static SDL as far as I can see). Overriding the system SDL 1.2.14 libraries and using LD_LIBRARY_PATH to point to SDL-1.2.13 libraries brings back the desired behavior. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 736093] New: Logitech WebCam microphone produces squeaky "chipmunk" audio
by bugzilla_noreply＠novell.com 18 Dec '17

18 Dec '17

https://bugzilla.novell.com/show_bug.cgi?id=736093 https://bugzilla.novell.com/show_bug.cgi?id=736093#c0 Summary: Logitech WebCam microphone produces squeaky "chipmunk" audio Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: nils(a)ellmenreich.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:8.0) Gecko/20100101 Firefox/8.0 A regression in the linux kernel prevent some Logitech webcam microphones (notably C270, C300, C310) to be properly initialized. As a result, audio playback of recordings are way too fast, producing a "chipmunk" effect. Here is the patch: http://article.gmane.org/gmane.linux.usb.general/52027 Fedorea fixed this alread. References in: https://bugzilla.redhat.com/show_bug.cgi?id=729269 https://bugzilla.redhat.com/show_bug.cgi?id=742010 https://bugs.archlinux.org/task/26528 https://bugzilla.kernel.org/show_bug.cgi?id=35922 Reproducible: Always Steps to Reproduce: 1.Record audio using Logitech webcan (e.g. with skype test call) 2.listen 3. Actual Results: Chipmunk audio Expected Results: normal audio -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 509945] New: Enforce packaging of static libraries by rpmlint check
by bugzilla_noreply＠novell.com 09 Dec '17

09 Dec '17

http://bugzilla.novell.com/show_bug.cgi?id=509945 Summary: Enforce packaging of static libraries by rpmlint check Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: dmueller(a)novell.com ReportedBy: prusnak(a)novell.com QAContact: qa(a)suse.de CC: ro(a)novell.com, mrueckert(a)novell.com, crrodriguez(a)novell.com Found By: Development We are trying to adopt the static libraries packaging scheme described on http://en.opensuse.org/Packaging/Guidelines#Packaging_Static_Libraries By adding rpmlint check we will enforce the correct packaging. rpmlint should check whether the package contains *.{a,la} files and perform these steps: a) package contains *.la files, does not contain *.a files -> throw error suggesting the packager to remove *.la files in %install phase b) package contains only *.la and *.a files -> check if the name ends with "-devel-static", throw error otherwise, suggesting the rename c) package contains *.la, *.a files AND *.so files (and probably some includes) -> check if the name ends with "-devel" AND package also provides "-devel-static" symbol, throw error otherwise, suggesting the addition of symbol -> also point out that packager has to be sure that static libraries are absolutely needed in the system. If not the package should be built with --disable-static and *.la files removed in %install phase -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 709260] New: package bzip2 missing documentation
by bugzilla_noreply＠novell.com 09 Dec '17

09 Dec '17

https://bugzilla.novell.com/show_bug.cgi?id=709260 https://bugzilla.novell.com/show_bug.cgi?id=709260#c0 Summary: package bzip2 missing documentation Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: i686 OS/Version: openSUSE 11.4 Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: giecrilj(a)stegny.2a.pl QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB7.1) The documentation for package bzip2 is not installed. Reproducible: Always Steps to Reproduce: 1. Read /usr/share/doc/packages/bzip2/README. 2. Find the referenced documentation. Actual Results: 1. Complete documentation is available in Postscript form (manual.ps), PDF (manual.pdf) or html (manual.html). A plain-text version of the manual page is available as bzip2.txt. 2. Nope. Expected Results: 2. /usr/share/doc/packages/bzip2/manual.html -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 661410] New: zypper ar vs. mr: different short option for --refresh
by bugzilla_noreply＠novell.com 22 Sep '17

22 Sep '17

https://bugzilla.novell.com/show_bug.cgi?id=661410 https://bugzilla.novell.com/show_bug.cgi?id=661410#c0 Summary: zypper ar vs. mr: different short option for --refresh Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: zypp-maintainers(a)forge.provo.novell.com ReportedBy: suse-beta(a)cboltz.de QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- To enable --refresh for a repo, zypper has different short options: - zypper ar -f - zypper mr -r That's higly confusing. Please allow the same short option for both ar and mr in future versions. (For backward compatibility I'd recommend to allow -f _and_ -r as long as those aren't needed for different functions.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 730327] New: vusb-analyzer needs 'gnomecanvas'
by bugzilla_noreply＠novell.com 27 Aug '17

27 Aug '17

https://bugzilla.novell.com/show_bug.cgi?id=730327 https://bugzilla.novell.com/show_bug.cgi?id=730327#c0 Summary: vusb-analyzer needs 'gnomecanvas' Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: afaerber(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- On openSUSE 12.1 RC2, `vusb-analyzer` resulted in: Traceback (most recent call last): File "/usr/bin/vusb-analyzer", line 13, in <module> from VUsbTools import Views, Log, Diff, Decode File "/usr/lib/python2.7/site-packages/VUsbTools/Views.py", line 15, in <module> from VUsbTools import Types, Style File "/usr/lib/python2.7/site-packages/VUsbTools/Types.py", line 20, in <module> except gnomecanvas: NameError: name 'gnomecanvas' is not defined Installing python-gnome package resolved this. A suitable Depends: should be added to the vusb-analyzer package. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 624196] New: Request for opencv to be built with TBB support
by bugzilla_noreply＠novell.com 05 Aug '17

05 Aug '17

http://bugzilla.novell.com/show_bug.cgi?id=624196 http://bugzilla.novell.com/show_bug.cgi?id=624196#c0 Summary: Request for opencv to be built with TBB support Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Macintosh OS/Version: openSUSE 11.2 Status: NEW Severity: Enhancement Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alexjironkin(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.9.2.7) Gecko/20100714 SUSE/3.6.7-1.1 Firefox/3.6.7 Since version OpenCV 2.1, which comes as part of the base packages now in 11.3 I think, OpenMP has been replaced by TBB. However OpenCV buid without that support on opensuse 11.2. Using TBB will greatly enhance all application using OpenCV e.g. digikam. Reproducible: Always Steps to Reproduce: 1. 2. 3. The request is to have either a separate package or enable OpenCV with TBB. Ubuntu 10.4 packages already do that so its stable enough to work with. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 701066] New: mc is eating all of ram after encfs until oom killer start to hunting
by bugzilla_noreply＠novell.com 22 Jun '17

22 Jun '17

https://bugzilla.novell.com/show_bug.cgi?id=701066 https://bugzilla.novell.com/show_bug.cgi?id=701066#c0 Summary: mc is eating all of ram after encfs until oom killer start to hunting Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hnsz2002(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 After mounting encfs filesystem, if you started mc, its eating any memory, any swap, then oom killer killed the process. [ 7410.101006] Out of memory: Kill process 11459 (mc) score 809 or sacrifice child [ 7410.101006] Killed process 11459 (mc) total-vm:6710300kB, anon-rss:3615048kB, file-rss:264kB Reproducible: Always Steps to Reproduce: 1. Open a shell, mount an encfs filesystem to a mountpoint. (encfs /data/crypt /mnt/1/ for example) 2. cd to mountpont (cd /mnt/1/) 3. run few ls in the directory until you wait to timeout encfs, and automatically umount the filesystem. 4. start an mc in this directory. Actual Results: oom killer kill mc. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 695322] New: home:dannori: Bug
by bugzilla_noreply＠novell.com 23 Apr '17

23 Apr '17

https://bugzilla.novell.com/show_bug.cgi?id=695322 https://bugzilla.novell.com/show_bug.cgi?id=695322#c0 Summary: home:dannori: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: dannoritzer(a)web.de ReportedBy: melchiaros(a)aol.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: Other Blocker: No Hi, I try to install ghdl from your repo. Yast shows me that ghdl-grt needs libada >= 3.1. A look at my system shows that I´ve installed libada46 from devel:/gcc. So all what ghdl need should be there?! Please make a correction when it is necessary. Greetings -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 747783] New: systemd: 'service openvpn start' triggers spamming of all terminals
by bugzilla_noreply＠novell.com 11 Apr '17

11 Apr '17

https://bugzilla.novell.com/show_bug.cgi?id=747783 https://bugzilla.novell.com/show_bug.cgi?id=747783#c0 Summary: systemd: 'service openvpn start' triggers spamming of all terminals Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gp(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:10.0) Gecko/20100101 Firefox/10.0 1. become root 2. # service openvpn start 3. Watch as every terminal will be spammed with something like Broadcast message from root(a)trevally.site (Fri, 17 Feb 2012 17:28:14 +0100): Password entry required for 'Enter Auth Username:' (PID 17770). Please enter password with the systemd-tty-ask-password-agent tool! This does not make any sense since I am already in the terminal with the prompt; why bother all other terminals? Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 19