November 2012 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 712683] New: disable ipv6 break ssh X11 tunnel
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=712683 https://bugzilla.novell.com/show_bug.cgi?id=712683#c0 Summary: disable ipv6 break ssh X11 tunnel Classification: openSUSE Product: openSUSE 12.1 Version: Milestone 3 Platform: All OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: diego.ercolani(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0 When you disable ipv6 from the yast2 network, system correctly remove the assignation of ipv6 addresses from everywhere but there is an annoying bug in openssh that break the possibility to make X11 tunnels because it seems that ssh try to bind X11 tunnel to an ipv6 address even with ipv6 disabled causing this kind of message in /var/log/messages: Aug 17 16:47:28 franz2011 sshd[6300]: error: Failed to allocate internet-domain X11 display socket. this can avoided configuring correctly the file /etc/ssh/sshd_config with the parameter: AddressFamily inet and restarting sshd. This is done in according to this bug reported to debian bugsystem: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=422327#20 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 761977] New: Publishing:TeXLive: Can not build package texlive-specs
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=761977 https://bugzilla.novell.com/show_bug.cgi?id=761977#c0 Summary: Publishing:TeXLive: Can not build package texlive-specs Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: openSUSE 12.2 Status: NEW Severity: Major Priority: P5 - None Component: BuildService AssignedTo: werner(a)suse.com ReportedBy: werner(a)suse.com QAContact: adrian(a)suse.com Found By: Development Blocker: --- The last famous words from the virtual system is 6424 packages and 0 specfiles checked; 0 errors, 76 warnings. ... creating baselibs /.build/build: line 549: /usr/bin/chroot: Argument list too long [15324.871575] SysRq : Power Off Warning: clean shut down of the VM didn't work [15331.715541] Power down. How can I avoid this? Why the system is not able to copy back the 6424 packages build by the main spec file texlive-specs.spec? Do I've really create 2200 main packages for the 2200 spec files. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 735288] New: go: make: /usr/lib/go/bin/8g: Command not found
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=735288 https://bugzilla.novell.com/show_bug.cgi?id=735288#c0 Summary: go: make: /usr/lib/go/bin/8g: Command not found Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Development AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dmacvicar(a)suse.com QAContact: qa(a)suse.de Found By: --- Blocker: --- go package installs binaries in %{_bindir} instead of $GOROOT/bin But if you use gomake, this looks for the compiler in GOBIN=$GOROOT/bin (as defined in Make.inc) resulting in a make: /usr/lib/go/bin/8g: Command not found -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 638893] New: /usr/share/doc/packages/openssh/README.SuSE update wanted
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=638893 https://bugzilla.novell.com/show_bug.cgi?id=638893#c0 Summary: /usr/share/doc/packages/openssh/README.SuSE update wanted Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: anicka(a)novell.com ReportedBy: ke(a)novell.com QAContact: qa(a)suse.de Found By: Documentation Blocker: --- Please, update /usr/share/doc/packages/openssh/README.SuSE. I guess, by now we can remove 9.1 and earlier items. Also please remove the opener (Dear ...) and the closer (Your team). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 530885] New: sshd fails to honour /etc/nologin presence when ssh keys used during login
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

http://bugzilla.novell.com/show_bug.cgi?id=530885 Summary: sshd fails to honour /etc/nologin presence when ssh keys used during login Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Security AssignedTo: security-team(a)suse.de ReportedBy: liam.gretton(a)leicester.ac.uk QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 With the pam module pam_nologin in use, all non-root logins are supposed to be prevented if the file /etc/nologin exists. SSH fails to prevent user logins if /etc/nologin exists and the user authenticates with a key. Authentications with a password are successfully prevented, as expected. Reproducible: Always Steps to Reproduce: 1. Add pam_nologin to /etc/pam.d/login: auth requisite pam_nologin.so 2. Create /etc/nologin 3. Log in via SSH with a password. Login will be correctly prevented. 4. Log in via SSH with a key. Login is successful. Actual Results: SSH login with a key is not prevented by pam_nologin. Expected Results: SSH login with a key should be prevented by pam_nologin when /etc/nologin is present. openssh-5.1p1-40.15 pam-1.0.2-13.4 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 506831] New: /etc/init.d/sshd: incorrect usage of daemonstartproc ?
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

http://bugzilla.novell.com/show_bug.cgi?id=506831 Summary: /etc/init.d/sshd: incorrect usage of daemonstartproc ? Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 1 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: anicka(a)novell.com ReportedBy: puzel(a)novell.com QAContact: qa(a)suse.de Found By: Development # /etc/init.d/sshd restart Shutting down SSH daemon Starting SSH daemonstartproc: option -p does not work in force mode sshd daemon seems to work OK, though. reproducible: always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 625552] New: openssh: inprove recommendation in "REMOTE HOST IDENTIFICATION HAS CHANGED" message
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

http://bugzilla.novell.com/show_bug.cgi?id=625552 http://bugzilla.novell.com/show_bug.cgi?id=625552#c0 Summary: openssh: inprove recommendation in "REMOTE HOST IDENTIFICATION HAS CHANGED" message Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: anicka(a)novell.com ReportedBy: sbrabec(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- When remote host identification changes, following message appears: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that the RSA host key has just been changed. The fingerprint for the RSA key sent by the remote host is ................ Please contact your system administrator. Add correct host key in /home/sbrabec/.ssh/known_hosts to get rid of this message. Offending key in /home/sbrabec/.ssh/known_hosts:1 RSA host key for ben has changed and you have requested strict checking. Host key verification failed. Following the message and opened known_hosts file, I found just an ASCII noise. Well, I tried to delete line 1 (guessing from the error message) and got this message: The authenticity of host 'foo (...)' can't be established. RSA key fingerprint is ............ Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'foo' (RSA) to the list of known hosts. Warning: the RSA host key for foo' differs from the key for the IP address '...' Offending key for IP in /home/sbrabec/.ssh/known_hosts:1 Are you sure you want to continue connecting (yes/no)? yes It would be nice to change the messsage and offer ssh-keygen -R or so. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 776058] New: Go language - go get/install fails with permission denied
by bugzilla_noreply＠novell.com 26 Dec '19

26 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=776058 https://bugzilla.novell.com/show_bug.cgi?id=776058#c0 Summary: Go language - go get/install fails with permission denied Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: Other OS/Version: openSUSE 12.1 Status: NEW Severity: Major Priority: P5 - None Component: Development AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: graham(a)andtech.eu QAContact: qa-bugs(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1226.0 Safari/537.4 SUSE/22.0.1226.0 With the Go 1.0.2 update, as a non priveleged user using the 'go' toolchain command to get/install a third party package from an SCM repo may fail with the message: go install runtime: open /usr/lib64/go/pkg/linux_amd64/runtime.a: permission denied The go build command somehow thinks the runtime .a archive is older than the runtime package source and so tries to rebuild the runtime package for linking. Known workarounds: 1. Pass the openSUSE specific -s flag to 'go get', 'go build' e.g. go get -s example.com/package 2. Update the file time on the runtime .a archive, as root do: find /usr/lib64/go/pkg -type f -exec touch {} + Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 536505] New: rrdtool graph has some problems with vertical auto-scaling
by bugzilla_noreply＠novell.com 09 Dec '19

09 Dec '19

http://bugzilla.novell.com/show_bug.cgi?id=536505 Summary: rrdtool graph has some problems with vertical auto-scaling Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: All OS/Version: SLES 10 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Ulrich.Windl(a)rz.uni-regensburg.de QAContact: qa(a)suse.de Found By: --- Created an attachment (id=316589) --> (http://bugzilla.novell.com/attachment.cgi?id=316589) Example with --rigid: No y scale displayed User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.21) Gecko/20090410 SUSE/1.1.16-1.1.2 SeaMonkey/1.1.16 (Found in current version of SLES10 SP2, rrdtool-1.2.12-13.2) Specific values (like all between 17.7 and 17.8) cause rrdtool's graph to autoscale the values at a range of 10 to 20, making actual variations practically invisible. There are other intervals where similar problems arise, like [42.0:42.2] where the scale is [40:50]. The --alt-autoscale improves the scaling, but has a problem with not enough numeric labels for the y-axis being shown, just as --rigid does. The author of the tool said the current version is much better regarding those issues. Reproducible: Sometimes Steps to Reproduce: 1. Create graphs with automatic scaling where the values vary a little bit around some undetermined value Actual Results: Some graphs are not good enough to show the variations. Expected Results: The vertical scale should respect the range of values more that it currently does. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 768947] New: purge-kernels does not log to /var/log/zypp/history
by bugzilla_noreply＠novell.com 09 Dec '19

09 Dec '19

https://bugzilla.novell.com/show_bug.cgi?id=768947 https://bugzilla.novell.com/show_bug.cgi?id=768947#c0 Summary: purge-kernels does not log to /var/log/zypp/history Classification: openSUSE Product: openSUSE 12.2 Version: Factory Platform: Other OS/Version: openSUSE 12.2 Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: mmarek(a)suse.com ReportedBy: suse-beta(a)cboltz.de QAContact: qa-bugs(a)suse.de Found By: Beta-Customer Blocker: --- purge-kernels logs to /var/log/messages - but that's a logfile nobody reads when he wants to check the package installation/removal history. /var/log/zypp/history is a much better logfile for this - purge-kernels should write it's removal log there (additional or instead of /var/log/messages). (Yes, I know that purge-kernels calls rpm directly ;-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2