August 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 681340] New: chkconfig stops working after installing cluster-glue package
by bugzilla_noreply＠novell.com 24 Aug '11

24 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=681340 https://bugzilla.novell.com/show_bug.cgi?id=681340#c0 Summary: chkconfig stops working after installing cluster-glue package Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: PC OS/Version: All Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: comes(a)naic.edu QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.1.2) Gecko/20070221 SeaMonkey/1.1.1 After installing cluster-glue package the command chkconfig <service> on aborts with the following error: insserv: FATAL: service network is missed in the runlevels 2 4 to use service ha_logd insserv: FATAL: service syslog is missed in the runlevels 4 to use service ha_logd insserv: exiting now! /sbin/insserv failed, exit code 1 if I remove cluster-glue or if I disable the logd service (chkconfig logd off) then chkconfig <service> on works again. Reproducible: Always Steps to Reproduce: 1. zypper in cluster-glue 2. chkconfig <any_service> on 3. Actual Results: command chkconfig <service> on fails Expected Results: command chkconfig <service> on should succeed -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 710247] New: emacs GPL violoation - please provide new tar balls
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=710247 https://bugzilla.novell.com/show_bug.cgi?id=710247#c0 Summary: emacs GPL violoation - please provide new tar balls Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: werner(a)novell.com ReportedBy: aj(a)novell.com QAContact: qa(a)suse.de CC: cfarrell(a)novell.com Found By: Product Management Blocker: --- Please update emacs 23.2 and 23.3 packages for all distributions with the new tarballs from: ftp://ftp.gnu.org/gnu/emacs/emacs-23.2a.tar.bz2 ftp://ftp.gnu.org/gnu/emacs/emacs-23.2a.tar.gz ftp://ftp.gnu.org/gnu/emacs/emacs-23.3a.tar.bz2 ftp://ftp.gnu.org/gnu/emacs/emacs-23.3a.tar.gz Details available via this article: http://lwn.net/SubscriberLink/453970/713c699c20d7d833/ -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 450196] PATA ext3 - recovering journal on / on first boot on new kernel/fresh system updates
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=450196 https://bugzilla.novell.com/show_bug.cgi?id=450196#c70 --- Comment #70 from Felix Miata <mrmazda(a)earthlink.net> 2011-08-23 16:04:37 UTC --- Created an attachment (id=447223) --> (http://bugzilla.novell.com/attachment.cgi?id=447223) modified /etc/init.d/halt This is supposed to produce recjourn.txtor hung-tasks.txt, but didn't on a 11.4 system I just upgraded after about 4 months (since April 26) not doing so, as follows: 1-zypper al kernel-desktop 2-zypper ref 3-zypper dup 4-install attached halt file 5-reboot 6-zypper rl kernel-desktop 7-zypper in kernel-desktop 8-reboot The result of above was neither recjourn.txt nor hung-task.txt, and yet 3 lines of clearing orphaned inodes on / device in /var/log/boot.omsg. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 713727] changing password for local user not possible
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=713727 https://bugzilla.novell.com/show_bug.cgi?id=713727#c10 --- Comment #10 from Bernhard Wiedemann <bwiedemann(a)novell.com> 2011-08-23 17:00:07 CEST --- This is an autogenerated message for OBS integration: This bug (713727) was mentioned in https://build.opensuse.org/request/show/79588 11.4 / libxcrypt https://build.opensuse.org/request/show/79590 11.3 / libxcrypt -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 679271] New: devel:languages:python/pyxattr: Bug
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=679271 https://bugzilla.novell.com/show_bug.cgi?id=679271#c0 Summary: devel:languages:python/pyxattr: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: jmatejek(a)novell.com ReportedBy: berendt(a)b1-systems.de QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: Community User Blocker: --- can't install pyxattr on openSUSE 11.4: # zypper install pyxattr Loading repository data... Reading installed packages... Resolving package dependencies... Problem: nothing provides libpython2.6.so.1.0 needed by pyxattr-0.5.0-1.3.i586 Solution 1: do not install pyxattr-0.5.0-1.3.i586 Solution 2: break pyxattr by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 713727] changing password for local user not possible
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=713727 https://bugzilla.novell.com/show_bug.cgi?id=713727#c7 --- Comment #7 from Ludwig Nussel <lnussel(a)novell.com> 2011-08-23 16:45:10 CEST --- Workaround: cd /`rpm --eval %_lib`/xcrypt for i in x y; do rm -f libxcrypt_2$i.so.1 cp libxcrypt_2a.so.1.0.0 libxcrypt_2$i.so.1 done -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 713727] changing password for local user not possible
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=713727 https://bugzilla.novell.com/show_bug.cgi?id=713727#c6 Ludwig Nussel <lnussel(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P2 - High Group|novellonly | CC| |security-team(a)suse.de AssignedTo|security-team(a)suse.de |lnussel(a)novell.com Severity|Normal |Major --- Comment #6 from Ludwig Nussel <lnussel(a)novell.com> 2011-08-23 16:37:50 CEST --- packaging mistake. The hack in the libxcrypt plugin to detect the file name of the plugin doesn't work. dlopen is too smart and doesn't load a lib twice if it's symlink points to the same file. If the old password has id 2a compat mode turns it in 2x so libxcrypt_2x.so.1 (symlink to libxcrypt_2a.so.1) is loaded. Then the new password is supposed to get id 2y but dlopen doesn't actually load libxcrypt_2y.so.1 as it's the same file as for 2x. So when the plugin looks at it's file name it sees 2x and thinks it must generate a salt for 2x which is not possible. Fix is to not install symlinks bug copies in the spec file of libxcrypt. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 621154] New: amreport cannot print reports
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

http://bugzilla.novell.com/show_bug.cgi?id=621154 http://bugzilla.novell.com/show_bug.cgi?id=621154#c0 Summary: amreport cannot print reports Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: R.Vickers(a)cs.rhul.ac.uk QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6 The Amanda software has a feature whereby the amreport program sends a postscript report directly to a printer. This feature is broken in 11.2, and generates an error message in the plain text report: amreport: ERROR no printer command defined The amcheck program produces a similar message: amcheck -cs configname Amanda Tape Server Host Check ----------------------------- ERROR:lbl-templ set but no LPRCMD defined. You should reconfigure amanda and make sure it finds a lpr or lp command. Looking at the source code of reporter.c we see that this message is generated if the build process has failed to define the macro LPRCMD. So something has gone wrong at build time. Reproducible: Always Steps to Reproduce: 1. Create an Amanda configuration that uses the lbl-templ feature, e.g. lbl-templ "/var/lib/amanda/lbl-templ/DLT-A4.ps" 2. amreport configname -f report.txt -l ~amanda/DailyCS/log.suffix 3. observe error message in report.txt This problem may possibly have the same cause as Bug 620003, but I am submitting a separate report in case they are different. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 620003] New: amcleanup fails with 'Can't exec "-eo"'
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

http://bugzilla.novell.com/show_bug.cgi?id=620003 http://bugzilla.novell.com/show_bug.cgi?id=620003#c0 Summary: amcleanup fails with 'Can't exec "-eo"' Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: R.Vickers(a)cs.rhul.ac.uk QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-GB; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6 The amcleanup program (from package amanda-2.6.1.1-3.5.1.x86_64) produces an error message Can't exec "-eo": Permission denied at /usr/lib/perl5/vendor_perl/5.10.0/Amanda/Process.pm line 177. -eo pid,ppid,command: Permission denied at /usr/lib/perl5/vendor_perl/5.10.0/Amanda/Process.pm line 177. This is because /usr/lib/perl5/vendor_perl/5.10.0/Amanda/Constants.pm contains the line $PS = ""; Presumably this should have been set to /bin/ps during the build process. Reproducible: Always Steps to Reproduce: 1. # su amanda -c "/usr/sbin/amcleanup configname" -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 708935] New: openSUSE:11.4/libtool: Bug
by bugzilla_noreply＠novell.com 23 Aug '11

23 Aug '11

https://bugzilla.novell.com/show_bug.cgi?id=708935 https://bugzilla.novell.com/show_bug.cgi?id=708935#c0 Summary: openSUSE:11.4/libtool: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: pth(a)novell.com ReportedBy: novell(a)ghalkes.nl QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Compiling C++ libraries using libtool fails because the compiler is not actually called: Command: $ libtool --mode=link --tag=CXX g++ -shared -version-info 0:0:0 -o src/libt3widget.la src/colorscheme.lo [snip] src/wrapinfo.lo -lsigc-2.0 -L/usr/lib -ltranscript -L/usr/lib -lt3unicode -L/usr/lib -lt3key -L/usr/lib -lt3window -lpcre -pthread -rpath /usr/lib64 Output: libtool: link: (cd "src/.libs" && rm -f "libt3widget.so.0" && ln -s "libt3widget.so.0.0.0" "libt3widget.so.0") libtool: link: (cd "src/.libs" && rm -f "libt3widget.so" && ln -s "libt3widget.so.0.0.0" "libt3widget.so") libtool: link: ( cd "src/.libs" && rm -f "libt3widget.la" && ln -s "../libt3widget.la" "libt3widget.la" ) In the above I have removed a list of object files and replaced them with [snip] for readability. The first line of the output should read something like: libtool: link: g++ -shared -nostdlib /usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../../../lib/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.4.5/crtbeginS.o .libs/test.o -L/usr/lib/gcc/x86_64-linux-gnu/4.4.5 -L/usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../.. -L/usr/lib/x86_64-linux-gnu -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-linux-gnu/4.4.5/crtendS.o /usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../../../lib/crtn.o -Wl,-soname -Wl,libtest.so.0 -o .libs/libtest.so.0.0.0 (Note that this is on a different machine with Ubuntu 10.10, compiling a different source) The problem is caused by the fact that libtool was built on a system without g++ installed. Adding a BuildRequires: gcc-c++ line to the spec file will resolve this problem. The problem has been noticed before by others as well: http://linux.derkeiler.com/Mailing-Lists/SuSE/2010-12/msg00655.html -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14