July 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 692440] New: OpenVPN should have a sysconfig entry to pick which VPN configurations are enabled
by bugzilla_noreply＠novell.com 28 Apr '16

28 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=692440 https://bugzilla.novell.com/show_bug.cgi?id=692440#c0 Summary: OpenVPN should have a sysconfig entry to pick which VPN configurations are enabled Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jmatejek(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- in Debian/Ubuntu, it is possible to configure OpenVPN service to only start some of the available .confs in /etc/openvpn. This is useful when you have more than one openvpn config, such as home and work VPNs and you don't want to use them simultaneously. Also, their init script takes an optional argument that specifies name of the conf to start/stop openSUSE starts all OpenVPN confs automatically and you cannot choose which ones to use. It would be nice to have this feature. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 700229] New: telnet crashes glibc when using "-b" parameter
by bugzilla_noreply＠novell.com 28 Apr '16

28 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=700229 https://bugzilla.novell.com/show_bug.cgi?id=700229#c0 Summary: telnet crashes glibc when using "-b" parameter Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: novell-web(a)zmi.at QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 I wanted telnet to source from another IP, using "-b" parameter: # telnet -b eth1 10.10.10.10 Trying 10.10.10.10... telnet: eth1: Name or service not known: Success Speicherzugriffsfehler I tried that twice, then looked into dmesg: [60254.321495] telnet[28275] general protection ip:7f733a452a63 sp:7fff6839fbe0 error:0 in libc-2.11.3.so[7f733a393000+164000] [60350.030095] telnet[29348] general protection ip:7f7169480a63 sp:7fff37e01070 error:0 in libc-2.11.3.so[7f71693c1000+164000] This is on openSUSE 11.4, but I first discovered it in 11.2, where it puts more details on the screen: # telnet -b eth0:1 10.127.128.5 25 Trying 10.127.128.5... telnet: eth0:1: Name or service not known: Success *** glibc detected *** telnet: munmap_chunk(): invalid pointer: 0x00007fff0a06ace8 *** ======= Backtrace: ========= /lib64/libc.so.6[0x7f825d605d06] /lib64/libc.so.6(freeaddrinfo+0x20)[0x7f825d64d510] telnet[0x7f825dd61939] telnet(main+0x34f)[0x7f825dd5a1ff] /lib64/libc.so.6(__libc_start_main+0xfd)[0x7f825d5b1a7d] telnet[0x7f825dd59d59] ======= Memory map: ======== 7f825cf6b000-7f825cf81000 r-xp 00000000 ca:01 16518 /lib64/libgcc_s.so.1 7f825cf81000-7f825d180000 ---p 00016000 ca:01 16518 /lib64/libgcc_s.so.1 7f825d180000-7f825d181000 r--p 00015000 ca:01 16518 /lib64/libgcc_s.so.1 7f825d181000-7f825d182000 rw-p 00016000 ca:01 16518 /lib64/libgcc_s.so.1 7f825d182000-7f825d18d000 r-xp 00000000 ca:01 3184 /lib64/libnss_files-2.10.1.so 7f825d18d000-7f825d38d000 ---p 0000b000 ca:01 3184 /lib64/libnss_files-2.10.1.so 7f825d38d000-7f825d38e000 r--p 0000b000 ca:01 3184 /lib64/libnss_files-2.10.1.so 7f825d38e000-7f825d38f000 rw-p 0000c000 ca:01 3184 /lib64/libnss_files-2.10.1.so 7f825d38f000-7f825d391000 r-xp 00000000 ca:01 17973 /lib64/libdl-2.10.1.so 7f825d391000-7f825d591000 ---p 00002000 ca:01 17973 /lib64/libdl-2.10.1.so 7f825d591000-7f825d592000 r--p 00002000 ca:01 17973 /lib64/libdl-2.10.1.so 7f825d592000-7f825d593000 rw-p 00003000 ca:01 17973 /lib64/libdl-2.10.1.so 7f825d593000-7f825d6e4000 r-xp 00000000 ca:01 3936 /lib64/libc-2.10.1.so 7f825d6e4000-7f825d8e4000 ---p 00151000 ca:01 3936 /lib64/libc-2.10.1.so 7f825d8e4000-7f825d8e8000 r--p 00151000 ca:01 3936 /lib64/libc-2.10.1.so 7f825d8e8000-7f825d8e9000 rw-p 00155000 ca:01 3936 /lib64/libc-2.10.1.so 7f825d8e9000-7f825d8ee000 rw-p 00000000 00:00 0 7f825d8ee000-7f825d92c000 r-xp 00000000 ca:01 3177 /lib64/libncurses.so.5.6 7f825d92c000-7f825db2b000 ---p 0003e000 ca:01 3177 /lib64/libncurses.so.5.6 7f825db2b000-7f825db2f000 r--p 0003d000 ca:01 3177 /lib64/libncurses.so.5.6 7f825db2f000-7f825db35000 rw-p 00041000 ca:01 3177 /lib64/libncurses.so.5.6 7f825db35000-7f825db53000 r-xp 00000000 ca:01 4324 /lib64/ld-2.10.1.so 7f825dd26000-7f825dd28000 rw-p 00000000 00:00 0 7f825dd4f000-7f825dd52000 rw-p 00000000 00:00 0 7f825dd52000-7f825dd53000 r--p 0001d000 ca:01 4324 /lib64/ld-2.10.1.so 7f825dd53000-7f825dd54000 rw-p 0001e000 ca:01 4324 /lib64/ld-2.10.1.so 7f825dd54000-7f825dd6a000 r-xp 00000000 ca:01 9058 /usr/bin/telnet 7f825df6a000-7f825df6b000 r--p 00016000 ca:01 9058 /usr/bin/telnet 7f825df6b000-7f825df6d000 rw-p 00017000 ca:01 9058 /usr/bin/telnet 7f825df6d000-7f825df9b000 rw-p 00000000 00:00 0 [heap] 7fff0a058000-7fff0a06d000 rw-p 00000000 00:00 0 [stack] 7fff0a098000-7fff0a099000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] Abgebrochen Seems this bug dates a while back. While 11.2 is not in bugfix phase anymore, 11.3 and 11.4 should be fixed, please. Reproducible: Always Steps to Reproduce: 1. use "telnet -b eth0 <IP address>" Actual Results: crash in glibc Expected Results: should work :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 34

[Bug 601779] New: 32bit 'tree' doesn't show files 2GB and larger
by bugzilla_noreply＠novell.com 28 Apr '16

28 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=601779 http://bugzilla.novell.com/show_bug.cgi?id=601779#c0 Summary: 32bit 'tree' doesn't show files 2GB and larger Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jc(a)ymmv.dk QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100317 SUSE/3.5.9-0.1.1 Firefox/3.5.9 Hi On 32bit systems the 'tree' command dosn't show 'large' files. I have tested on a 64bit system as well, and the problem is only present on 32bit systems. I have done a fair amount of research, comparing compile-time arguments with those of 32bit Debian packages. In the end I think it comes down to the 'spec' file: In tree.spec the 'make' command is: %build make CFLAGS="$RPM_OPT_FLAGS" -which overrides the CFLAGS set in the Makefile: CFLAGS=-O2 -Wall -fomit-frame-pointer -DLINUX -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -which results in the binary being built with these flags instead: RPM_OPT_FLAGS="-O2 -g -m32 -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables" Now; If I change the spec file so that; %build make -then the compiler gets the flags as set in the Makefile, and the resulting binary works with files larger than 2G. I'm guessing that it's desirable to get $RPM_OPT_FLAGS passed to the compiler, but I'm unsure as to how one would 'merge' this variable with $CFLAGS from the Makefile? As for the severity of the bug: It doesn't break the system, but the functionality of the command is seriously hampered by this. It seems reasonable (to me) that it's a packaging bug, and therefore it should be easily fixed. I have confirmation from the opensuse(a)opensuse.org list that the bug is present on 11.0, so it seems to be an 'old' problem... Kind Regards, Jon Clausen Reproducible: Always Steps to Reproduce: 1. get or create a file larger than 2GB I used 'dd' to create two files - one 2GB, one 1KB smaller: dd if=/dev/zero of=2G bs=1k count=2097152 dd if=/dev/zero of=2G-1k bs=1k count=2097151 2. use 'tree /path/to/large/file' 3. observe output Actual Results: output from 32bit system: jon@nx8220:~> ll tmp/largefiles/ total 4194304 -rw-r--r-- 1 jon users 2147483648 2010-04-30 12:50 2G -rw-r--r-- 1 jon users 2147482624 2010-04-30 12:52 2G-1k jon@nx8220:~> tree tmp/largefiles/ tmp/largefiles/ `-- 2G-1k 0 directories, 1 file Expected Results: output from 64bit system: jon@cnu8092slm:~> ll tmp/largefiles/ total 4194304 -rw-r--r-- 1 jon users 2147483648 2010-04-30 12:58 2G -rw-r--r-- 1 jon users 2147482624 2010-04-30 12:58 2G-1k jon@cnu8092slm:~> tree tmp/largefiles/ tmp/largefiles/ |-- 2G `-- 2G-1k 0 directories, 2 files AFAICT the flag that makes the difference is -D_FILE_OFFSET_BITS=64 - which makes the binary use *stat64() rather than *stat() when files are 'large'. On 64bit systems I suppose everything uses *stat64() anyways, which is why the problem only surfaces on 32bit systems... ? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 707860] New: Static buffers in minicom are too small
by bugzilla_noreply＠novell.com 28 Apr '16

28 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=707860 https://bugzilla.novell.com/show_bug.cgi?id=707860#c0 Summary: Static buffers in minicom are too small Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Stromeko(a)NexGo.DE QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:5.0) Gecko/20100101 Firefox/5.0 The terminal emulation minicom uses a static buffer for reading in config parameters. When you've got a path like: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0 then it gets truncated and can't be used. Using the real device /dev/ttyUSB0 is not a good idea since udev may put this device on /dev/ttyUSB1 the next time. The buffer can be increased by setting #define PARS_VAL_LEN 196 in src/configsym.h (standard value is 64). If I build minicom with this change (and all the patches from https://build.opensuse.org/package/files?package=minicom&project=Base%3ASys…) then it will work with a configuration that references the above device. Reproducible: Always Steps to Reproduce: minicom -D /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0 Actual Results: minicom: cannot open /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Co: No such file or directory Expected Results: minicom opening the serial port it had been given -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 23

[Bug 578994] New: hwinfo cuts off list of cpu features
by bugzilla_noreply＠novell.com 28 Apr '16

28 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=578994 http://bugzilla.novell.com/show_bug.cgi?id=578994#c0 Summary: hwinfo cuts off list of cpu features Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: HMWiesinger(a)gmx.at QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.1 (like Gecko) The list of supported features is cut off at some point. hwinfo (16.10) shows the following list: Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36, clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc, arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx, smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse whereas "cat /proc/cpuinfo" shows: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida tpr_shadow vnmi flexpriority Reproducible: Always Steps to Reproduce: 1. hwinfo --cpu 2. cat /proc/cpuinfo 3. compare output -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 685093] New: Printing over Samba does not work
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=685093 https://bugzilla.novell.com/show_bug.cgi?id=685093#c0 Summary: Printing over Samba does not work Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: Samba AssignedTo: samba-maintainers(a)SuSE.de ReportedBy: uli.2001(a)gmx.de QAContact: samba-maintainers(a)SuSE.de Found By: --- Blocker: --- I am trying to print from Opensuse on a shared printer attached to a Windows machine, using Samba. This does not work. The document is not printed and shows up in the Cups webinterface with "status" begin "stopped". It has been working reliably with several Opensuse versions before 11.4. In the webinterface of Cups, I see the following: http://localhost:631/admin/log/error_log E [04/Apr/2011:21:39:20 +0200] Unable to execute /usr/lib/cups/backend/smb: insecure file permissions (0104750) E [04/Apr/2011:21:39:20 +0200] [Job 17] Stopping job because the sheduler could not execute the backend. E [04/Apr/2011:21:39:39 +0200] Unable to execute /usr/lib/cups/backend/smb: insecure file permissions (0104750) E [04/Apr/2011:21:39:39 +0200] [Job 16] Stopping job because the sheduler could not execute the backend. E [04/Apr/2011:21:40:38 +0200] Unable to execute /usr/lib/cups/backend/smb: insecure file permissions (0104750) E [04/Apr/2011:21:40:38 +0200] [Job 18] Stopping job because the sheduler could not execute the backend. E [04/Apr/2011:21:42:37 +0200] Unable to execute /usr/lib/cups/backend/smb: insecure file permissions (0104750) E [04/Apr/2011:21:42:37 +0200] [Job 18] Stopping job because the sheduler could not execute the backend. E [04/Apr/2011:21:45:39 +0200] [Job 18] Stopping unresponsive job! E [04/Apr/2011:21:50:59 +0200] Unable to execute /usr/lib/cups/backend/smb: insecure file permissions (0104750) E [04/Apr/2011:21:50:59 +0200] [Job 18] Stopping job because the sheduler could not execute the backend. This looks similar to the following, but I can't get a workaround out of that: http://forums.opensuse.org/english/get-technical-help-here/network-internet… -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 42

[Bug 702654] New: Typos in audit-laf.pot file
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=702654 https://bugzilla.novell.com/show_bug.cgi?id=702654#c0 Summary: Typos in audit-laf.pot file Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andrea.turrini(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=437146) --> (http://bugzilla.novell.com/attachment.cgi?id=437146) useless y2logs, just to avoid "NEEDINFO" request: please attach y2logs User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0 The yast/audit-laf.pot file contains the following typos: logfile_settings dialog help 5/8 #: src/helps.ycp:75 msgid "" "Flush: describes how to write the data to disk. If set to INCREMANTAL the\n" "Frequency parameter tells how many records to write before issuing an explicit flush to disk.\n" "NONE means: no special effort is made to flush data, DATA: keep data portion synced,\n" "SYNC: keep data and meta-data fully synced." INCREMANTAL -> INCREMENTAL (I suppose...) #. rules dialog help 1/6 #: src/helps.ycp:145 msgid "" "<big>Rules for auditctl</big> \n" "This dialog offers the possibiltiy to enable or to disable the syscall\n" "auditing as well as to lock the audit configuration.\n" "The selected flag from Set Enabled Flag will be added to the rules." possibiltiy -> possibility #. rules dialog help 3/6 #: src/helps.ycp:152 msgid "" "Enabling auditing whithout additional rules will cause the\n" " applications which use libaudit, e.g. PAM to log to /var/log/audit/audit.log (default). " whithout -> without Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 559704] New: gnome-web-photo doesn't work because it can't find libxul.so
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=559704 http://bugzilla.novell.com/show_bug.cgi?id=559704#c0 Summary: gnome-web-photo doesn't work because it can't find libxul.so Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: arizonagroovejet(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 mike@continuity:/tmp$ gnome-web-photo http://news.bbc.co.uk foo.png gnome-web-photo: error while loading shared libraries: libxul.so: cannot open shared object file: No such file or directory Reproducible: Always Steps to Reproduce: 1. Try and use gnome-web-photo Actual Results: Error message as shown above. Expected Results: That it works. It can be made to work like this: mike@continuity:/tmp$ LD_LIBRARY_PATH="/usr/lib/xulrunner-1.9.1.5/" gnome-web-photo http://news.bbc.co.uk foo.png *** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable). mike@continuity:/tmp$ identify foo.png foo.png PNG 1024x1710 1024x1710+0+0 8-bit DirectClass 530kb -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 578053] New: postgresql-plperl looks for libperl.so in the wrong place
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=578053 http://bugzilla.novell.com/show_bug.cgi?id=578053#c0 Summary: postgresql-plperl looks for libperl.so in the wrong place Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: eggyknap(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US) AppleWebKit/532.8 (KHTML, like Gecko) Chrome/4.0.299.0 Safari/532.8 On a completely new openSUSE 11.3 machine, I installed the postgresql-server, postgresql, and postgresql-plperl packages. After starting PostgreSQL and letting it initialize a new database, I sudo-d to the postgres user, and tried to add the PL/Perl language, as follows, with the error below: postgres@linux-e16r:~> createlang plperl createlang: language installation failed: ERROR: could not load library "/usr/lib/postgresql/plperl.so": libperl.so: cannot open shared object file: No such file or directory libperl.so lives in /usr/lib/perl5/5.10.0/i586-linux-thread-multi/CORE/libperl.so. Creating a symlink at /usr/lib/libperl.so to the installed libperl.so binary works around the problem. This also exists in at least one of the 10.x versions, though I don't have access to the servers to know the precise version(s) As a secondary note, the description of the postgresql-plperl package, at least as it appears in YaST2, says the package also includes PL/Tcl and PL/Python. This is incorrect. Thirdly, the documentation also claims "PostgreSQL also offers the builtin procedural language PL/SQL". This is also incorrect -- PL/SQL is an Oracle-specific language. PostgreSQL offers PL/pgSQL, which fact might be worth noting in the PL/Perl documentation, or it might not. Reproducible: Always Steps to Reproduce: 1.install postgresql, postgresql-server, and postgresql-plperl 2.start postgresql (/etc/init.d/postgresql start) 3.become the postgres user (sudo su - postgres) 4.create the plperl language in the default database: createlang plperl Actual Results: # createlang plperl createlang: language installation failed: ERROR: could not load library "/usr/lib/postgresql/plperl.so": libperl.so: cannot open shared object file: No such file or directory Expected Results: createlang should have no output, and a 0 exit status I realize this is a packaging bug, and likely not something distributed by Novell directly. I saw nowhere else to file the bug. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 551014] New: one click install: error ccoured while initializing the software repository
by bugzilla_noreply＠novell.com 27 Apr '16

27 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=551014 Summary: one click install: error ccoured while initializing the software repository Classification: openSUSE Product: openSUSE 11.2 Version: RC 1 Platform: Other OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: suse-beta(a)cboltz.de QAContact: jsrain(a)novell.com Found By: Beta-Customer Created an attachment (id=324701) --> (http://bugzilla.novell.com/attachment.cgi?id=324701) y2logs (11.2 repo from today, probably near RC2) I tried to install YaBSC from the openSUSE:Tools repo using one click install. After entering the root password, YaST showed an error dialog: An error ccoured while initializing the software repository. Details: Try again? [Ja] [Nein] (= Yes / No) Yes, the line after "Details:" was really empty. Therefore this bug has two parts: - the missing information about details in the error dialog - maybe the failure itsself is also a bug The last lines from y2log when the error dialog was open: 2009-10-29 15:48:16 <1> geeko(26435) [zypp] RepoManager.cc(init_knownRepositories):557 end construct known repos 2009-10-29 15:48:16 <3> geeko(26435) [Pkg] Source_Create.cc(RepositoryAdd):449 alias openSUSE:Tools already exists [That's probably the disabled 11.1 version of the openSUSE:tools repo] 2009-10-29 15:48:16 <1> geeko(26435) [Pkg] OneClickInstallWorkerFunctions.ycp:113 Pkg Builtin called: SourceRefreshNow 2009-10-29 15:48:16 <3> geeko(26435) [Interpreter] OneClickInstallWorkerFunctions.ycp:113 Parameter 1 is nil, Integer is required 2009-10-29 15:48:16 <1> geeko(26435) [Pkg] OneClickInstallWorkerFunctions.ycp:116 Pkg Builtin called: LastError 2009-10-29 15:48:16 <1> geeko(26435) [ui] YPushButton.cc(setFunctionKey):183 Guessing button role YOKButton for YPushButton "Ja" at 0x18fb1b8 from function key F10 2009-10-29 15:48:16 <1> geeko(26435) [ui] YPushButton.cc(setFunctionKey):183 Guessing button role YCancelButton for YPushButton "Nein" at 0x198aac 8 from function key F9 The full y2logs are attached. Search for [cb] in y2log - I have marked when the error dialog popped up. BTW: After answering the dialog with yes (= try again) and confirming the repo details, the installation worked. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9