June 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 684113] New: zypper dup on a system with RAID0 config (dmraid) leaves the system in unbootable state
by bugzilla_noreply＠novell.com 02 Jun '11

02 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=684113 https://bugzilla.novell.com/show_bug.cgi?id=684113#c0 Summary: zypper dup on a system with RAID0 config (dmraid) leaves the system in unbootable state Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: rschweikert(a)novell.com QAContact: qa(a)suse.de CC: mmarek(a)novell.com Found By: --- Blocker: --- Ran zypper dup to update from oS 11.3 to oS 11.4 on a system with 2 550 GB drives setup in a RAID 0 config in the BIOS (thus dmraid). After all packages were installed I rebooted the system, but upon reboot the machine could not find the root partition. The partition setup part1 -> /boot (ext2) part2 -> swap part3 -> / (xfs) I received the message Waiting for .......to appear After timeout I was dropped into a shell. I tried to run dmraid but received a "Command not found" error dmraid and related libraries and programs should be included in the initrd. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 683493] New: dmsetup problems with loop devices
by bugzilla_noreply＠novell.com 02 Jun '11

02 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=683493 https://bugzilla.novell.com/show_bug.cgi?id=683493#c0 Summary: dmsetup problems with loop devices Classification: openSUSE Product: openSUSE 11.5 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: nfbrown(a)novell.com ReportedBy: pcerny(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Device mapper seems to have some issues when using loop devices. With /dev/loop0 attached to /dev/sda, and following table file: # DM table file 0 XXX linear /dev/loop0 0 XXX YYY linear /dev/sda XXX # end of DM table file 'dmsetup create' prduces the following error in log: ---- snip ---- device-mapper: table: 253:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table ---- snip ---- With another loop device (say /dev/loop1) attached to /dev/sda and substitued for it in the table file, the whole process works correctly. $ dmsetup --version Library version: 1.02.63 (2011-02-09) Driver version: 4.19.1 $ uname -a Linux hostname 2.6.38-4-default #1 SMP 2011-03-15 17:12:01 +0100 x86_64 x86_64 x86_64 GNU/Linux The behaviour is present since at least Oct 2010. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 643375] New: boot is very long
by bugzilla_noreply＠novell.com 02 Jun '11

02 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=643375 https://bugzilla.novell.com/show_bug.cgi?id=643375#c0 Summary: boot is very long Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: i686 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: bga.lambert(a)free.fr QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=392695) --> (http://bugzilla.novell.com/attachment.cgi?id=392695) part of var/og/message User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.10) Gecko/20100914 SUSE/3.6.10-30.2 Firefox/3.6.10 GTB7.1 when i boot i wait 3 or 4 minutes before to get kdm login screen. I have llok at the console message and see virtualbos is loaded , after nfsclient and at this time i wait and after 3 minutes, kdm is running I joint part of the var/log/message who show this. the next step is biosEDD ? Reproducible: Always Steps to Reproduce: 1. 2. 3. My laptop is HP DV4269EA -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 43

[Bug 479005] bluetooth-applet shouldn't specify pairing code
by bugzilla_noreply＠novell.com 01 Jun '11

01 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=479005 https://bugzilla.novell.com/show_bug.cgi?id=479005#c Swamp Workflow Management <swamp(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard|maint:planned:update |. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 697565] New: Top panel in gnome3 displayed incorrectly
by bugzilla_noreply＠novell.com 01 Jun '11

01 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=697565 https://bugzilla.novell.com/show_bug.cgi?id=697565#c0 Summary: Top panel in gnome3 displayed incorrectly Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: 64bit OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: alimovalisher(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=432564) --> (http://bugzilla.novell.com/attachment.cgi?id=432564) Screenshot User-Agent: Mozilla/5.0 (X11; Linux i686) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.71 Safari/534.24 Top panel in gnome 3 doesn't display properly. When I using default video graphic driver all if working fine, but when I'm try to use ATI Catalyst drivers ver 11.5, top panel look likes a rainbow. I don't using defaults openSUSE video drivers, because my laptop (cpu) heated up to 80-90С when I'm use it. Reproducible: Always Steps to Reproduce: 1. install ATI catalyst drivers 2. 3. Actual Results: top panel displayed like a rainbow Expected Results: Top panel doesn't look like a rainbow -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 551721] New: topmost package appears to remain selected when a pattern is deselected
by bugzilla_noreply＠novell.com 01 Jun '11

01 Jun '11

http://bugzilla.novell.com/show_bug.cgi?id=551721 Summary: topmost package appears to remain selected when a pattern is deselected Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: per.jessen(a)enidan.com QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.8.1.6) Gecko/20070730 SUSE/2.0.0.6-25 Firefox/2.0.0.6 When a pattern is deselected under Yast->Software->Details, the topmost package on the right hand list appears to remain selected (green tickmark). Reproducible: Always Steps to Reproduce: Start an installation, go into software selection, select details, go to e.g. "Graphics", and deselect "patterns-openSUSE-imaging" and "patterns-openSUSE-kde4_imaging". At the top "ImageMagick" remains selected, even though it is no longer selected. This is easily verified by changing to another group and then back to Graphics. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 695961] New: openSUSE:Factory:Contrib/freerdp: Bug
by bugzilla_noreply＠novell.com 01 Jun '11

01 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=695961 https://bugzilla.novell.com/show_bug.cgi?id=695961#c0 Summary: openSUSE:Factory:Contrib/freerdp: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: prusnak(a)novell.com ReportedBy: bruno(a)ioda-net.ch QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Hi Pavel, There's some plugins non working on our openSUSE build (especially the sound) step to reproduce Get a remote windows access (tested against winxp, win2003, win7 32 & 64 bits) start a remote session and see the failing plugin rdpsnd.so and audin.so command line /usr/bin/xfreerdp -z -x l -a 32 -k 0x0000100C --plugin cliprdr --plugin rdpsnd --plugin audin --plugin rdpdr --data disk tmp /tmp -- -0 -g 1280x960 -n c-3po.vellerat.ioda.net -u pdf -d disney joyeux freerdp_chanman_load_plugin: filename cliprdr freerdp_chanman_load_plugin: /usr/lib64/freerdp/cliprdr.so MyVirtualChannelInit: freerdp_chanman_load_plugin: filename rdpsnd freerdp_chanman_load_plugin: /usr/lib64/freerdp/rdpsnd.so freerdp_chanman_load_plugin: failed to load library freerdp_chanman_load_plugin: filename audin freerdp_chanman_load_plugin: /usr/lib64/freerdp/audin.so freerdp_chanman_load_plugin: failed to load library freerdp_chanman_load_plugin: filename rdpdr freerdp_chanman_load_plugin: /usr/lib64/freerdp/rdpdr.so loaded device service: /usr/lib64/freerdp/disk.so loaded device service: /usr/lib64/freerdp/printer.so loaded device service: /usr/lib64/freerdp/serial.so loaded device service: /usr/lib64/freerdp/parallel.so MyVirtualChannelInit: xkbLayout: ch xkbVariant: fr xkbLayout: ch xkbVariant: fr find_keyboard_layout_in_xorg_rules: 100C detect_keyboard_layout_from_locale: 100C Using Swiss French (0x0000100C) Loading keymap evdev xkbfilepath: /usr/share/freerdp/keymaps/evdev Loading keymap aliases(qwerty) xkbfilepath: /usr/share/freerdp/keymaps/aliases kbd_init: detect_and_load_keyboard returned 4108 freerdp_kbd_init: 100C starting thread 0 to pluto:3389 main thread, waiting for all threads to exit freerdp_chanman_pre_connect: keyboard_layout: 100C connecting to pluto:3389 Legacy RDP encryption negotiated freerdp_chanman_post_connect: server name [joyeux] chan_man->num_libs [2] MyVirtualChannelOpen: MyVirtualChannelOpen: ui_warning: WARNING: Remote desktop does not support color depth 32; falling back to 16 same 0.8.2 version tested on a Ubuntu 11.04 works and the remote sound is here. with rdesktop remote sound on same plateform is working like a charm with pulseaudio. Affected (as tested version) 11.4 & Factory -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 689835] New: openSUSE:Factory:Contrib/freerdp: Bug
by bugzilla_noreply＠novell.com 01 Jun '11

01 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=689835 https://bugzilla.novell.com/show_bug.cgi?id=689835#c0 Summary: openSUSE:Factory:Contrib/freerdp: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: prusnak(a)novell.com ReportedBy: bruno(a)ioda-net.ch QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- Hi Pavol, there's some plugins not working here's the extract when started freerdp_chanman_load_plugin: filename cliprdr freerdp_chanman_load_plugin: /usr/lib64/freerdp/cliprdr.so MyVirtualChannelInit: freerdp_chanman_load_plugin: filename rdpsnd freerdp_chanman_load_plugin: /usr/lib64/freerdp/rdpsnd.so freerdp_chanman_load_plugin: failed to load library freerdp_chanman_load_plugin: filename audin freerdp_chanman_load_plugin: /usr/lib64/freerdp/audin.so freerdp_chanman_load_plugin: failed to load library freerdp_chanman_load_plugin: filename rdpdr freerdp_chanman_load_plugin: /usr/lib64/freerdp/rdpdr.so loaded device service: /usr/lib64/freerdp/disk.so loaded device service: /usr/lib64/freerdp/printer.so loaded device service: /usr/lib64/freerdp/serial.so loaded device service: /usr/lib64/freerdp/parallel.so MyVirtualChannelInit: xkbLayout: ch xkbVariant: fr xkbLayout: ch xkbVariant: fr rdpsnd.so and audin.so doesn't works. Don't know if it's related to the compile option, and now that we use mainly pulseaudio as default server. I saw the git repository is commited a lot last week. Perhaps a new version 0.8.3 or 0.9 is coming. This bug is open to not forget to check that before 12.1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 696792] New: Broken binutils doesn't compile a new kernel version
by bugzilla_noreply＠novell.com 01 Jun '11

01 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=696792 https://bugzilla.novell.com/show_bug.cgi?id=696792#c0 Summary: Broken binutils doesn't compile a new kernel version Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: i586 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: greywolf82(a)hotmail.it QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 Binutils provided by opensuse 11.4 are affected by a serious bug that it doesn't allow to compile a kernel. The problem is in vmlinux.lsd.S in the assignment jiffies = jiffies_64. This operations is done outside an ELF section and, for an error in binutils, this produces a kernel with jiffies at address zero. Binutils version affected until 2.21.51.0.3, so please upgrade!! Reproducible: Always Steps to Reproduce: 1. Compile a recent kernel Actual Results: New kernel doesn't boot. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 694311] New: virtualbox: tcpdump not logging packets to guests
by bugzilla_noreply＠novell.com 01 Jun '11

01 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=694311 https://bugzilla.novell.com/show_bug.cgi?id=694311#c0 Summary: virtualbox: tcpdump not logging packets to guests Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: All OS/Version: All Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bj(a)sernet.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 sniffing network traffic beween host and guest is broken since virtualbox 4.0. This is reported upstream here: http://www.virtualbox.org/ticket/8076 There is also a patch posted which is reported to fix the bug: http://www.virtualbox.org/attachment/ticket/8076/netflt_start_xmit_enable.p… As Oracle itself is too lame to get that fixed in a upstream release, can you please patch your packages accordingly? Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9