June 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 551736] New: NTP Server Address dropdown is empty in Date/Time installation screen
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

http://bugzilla.novell.com/show_bug.cgi?id=551736 Summary: NTP Server Address dropdown is empty in Date/Time installation screen Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jahudson(a)novell.com QAContact: jsrain(a)novell.com Found By: Beta-Customer Under Change Date and Time, there's a radio button labeled Synchronize with NTP Server. Below that is a dropdown form labeled NTP Server Address. Since it's a dropdown it implies that there should be a list of NTP servers to choose from. We should pre-populate them with common NTP servers. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 694784] New: NFS shares not mounted at boot in openSUSE 11.4
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=694784 https://bugzilla.novell.com/show_bug.cgi?id=694784#c0 Summary: NFS shares not mounted at boot in openSUSE 11.4 Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: Other Status: ASSIGNED Severity: Normal Priority: P5 - None Component: Release Notes AssignedTo: ke(a)novell.com ReportedBy: ke(a)novell.com QAContact: coolo(a)novell.com CC: lnussel(a)novell.com Found By: Documentation Blocker: --- +++ This bug was initially created as a clone of Bug #679212 +++ Ludwig Nussel 2011-05-16 07:20:31 UTC On distro upgrade the nfs service stays enabled if it was enabled before. New installs have it off, that's correct. Having nfs on slows down the boot process as it causes a dependency of $remote_fs on network which is unnecessary in the majority of installations. If yast is used to add nfs shares to fstab it makes sure to also enable 'nfs'. Manually editing /etc/fstab requires a manual "chkconfig nfs on" of course. ======================================================================== Patch by lnussel: Index: RELEASE-NOTES-openSUSE.xml =================================================================== --- RELEASE-NOTES-openSUSE.xml (Revision 9895) +++ RELEASE-NOTES-openSUSE.xml (Arbeitskopie) @@ -278,13 +278,12 @@ afterwards.</para> </sect3> -  - <sect3 id="tec.cifs.disabled" status="2011-02-11"> - <title>CIFS Service Disabled By Default</title> - <para>To reduce security risks, the CIFS service is no longer enabled +  + <sect3 id="tec.cifs.disabled" status="2011-05-16"> + <title>CIFS and NFS Services Disabled By Default</title> + <para>To improve boot speed the CIFS and NFS services are no longer enabled by default.</para> - <para>To enable it, start the YaST System Services (Runlevel) editor - and configure the <systemitem>cifs</systemitem> service.</para> + <para>Use the YaST System Services (Runlevel) editor to enable them if needed.</para> </sect3>  -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 674278] New: wireshark is unable to capture on systems with a bonding interface
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=674278 https://bugzilla.novell.com/show_bug.cgi?id=674278#c0 Summary: wireshark is unable to capture on systems with a bonding interface Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mt(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- At start, a popup is displayed: Can't get list of interfaces: SIOCGIFFLAGS: bonding masters: No such device It is trying to use the special bonding_masters file (for adding / removing bonding interfaces) as interface: # LANG=C ls -l /sys/class/net/ total 0 lrwxrwxrwx 1 root root 0 Feb 23 10:41 bond0 -> ./../devices/virtual/net/bond0 -rw-r--r-- 1 root root 4096 Feb 23 10:41 bonding_masters Fix is to filter for directories, or even better for /sys/class/net/*/ifindex. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 671689] New: No sound after suspend (HDA Intel)
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=671689 https://bugzilla.novell.com/show_bug.cgi?id=671689#c0 Summary: No sound after suspend (HDA Intel) Classification: openSUSE Product: openSUSE 11.4 Version: RC 1 Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Mobile Devices AssignedTo: mobile-bugs(a)forge.provo.novell.com ReportedBy: holgi(a)novell.com QAContact: qa(a)suse.de Found By: Component Test Blocker: --- After suspending my HP2710p (hwinfo in bug #671183) I do not have sound working anymore. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 647969] New: CUPS banners: support job information also in "Header" and "Footer"
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=647969 https://bugzilla.novell.com/show_bug.cgi?id=647969#c0 Summary: CUPS banners: support job information also in "Header" and "Footer" Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: All OS/Version: SuSE Other Status: ASSIGNED Severity: Enhancement Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: jsmeix(a)novell.com CC: Joachim.Reichelt(a)helmholtz-hzi.de Found By: Customer Blocker: --- Created an attachment (id=395913) --> (http://bugzilla.novell.com/attachment.cgi?id=395913) German mail with initial description and proposed patch for bannertops.c See http://www.cups.org/documentation.php/doc-1.4/spec-banner.html Currently CUPS 1.4 banner pages do not support to use the job information values (for the "Show" keyword) also in the text for the "Header" and "Footer". Something like ------------------------------------------------------------- Header job-name for job-originating-user-name ------------------------------------------------------------- would be nice to have so that the admin could specify to get what is most important in his particular case printed topmost on the banner pages. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 700954] New: Deficient PAM configuration files installed for XEN guest
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=700954 https://bugzilla.novell.com/show_bug.cgi?id=700954#c0 Summary: Deficient PAM configuration files installed for XEN guest Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Willy.Weisz(a)univie.ac.at QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 After installing an openSuSE 11.4 XEN guest with YaST I couldn't login to it via the graphical console in the XEN host, neither as root nor as the user defined during the installation. I also couldn't login via ssh using a password. Then I tried using the serial console: I could login without entering a password!!! Then I installed a public user key from a remote host into ssh/authorized_keys, and so I could ssh into the guest from that remote host. A third problem was that I couldn't change a password: I got an Authentication Token Manipulation Error. When looking into /var/log/messages I discovered that all my problems were PAM-related. Then I stumbled over bug 697670 which gave me the clue what to look for: Missing entries in /etc/pam.d/common-xxx files. common-password an common-auth were missing entries that are present in the corresponding .rpmnew files; in both cases i.a. the required module pam_unix2.so was left out. This is also true for common-session, but I'm unaware whether this causes problems too. Moving the 2 PAM configuration files with the corresponding .rpmnew ones solved all the problems described above. So please correct the XEN guest installation process!!!! Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 470482] YaST2 group .desktop files do not comply to standard which results in noise to .xsession-errors
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=470482 https://bugzilla.novell.com/show_bug.cgi?id=470482#c14 Lukas Ocilka <locilka(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|yast2-maintainers(a)suse.de |locilka(a)novell.com --- Comment #14 from Lukas Ocilka <locilka(a)novell.com> 2011-06-21 09:36:00 UTC --- Well, this seems to be only 'apparmor' and 'software' issue. The rest (checked in older revisions) had and have an Exec line: Exec=yast2 I'll change that to /sbin/yast2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 691830] New: Skipping the installation of a package stops installation but not download
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=691830 https://bugzilla.novell.com/show_bug.cgi?id=691830#c0 Summary: Skipping the installation of a package stops installation but not download Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: toddrme2178(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 If there is a problem with a package when installing with the software management module, you are given the option to skip the package. You are given a warning saying this may make the system unstable. However, it doesn't actually skip that one package, instead it downloads all the packages, then aborts the installation before any packages are installed. This means that if you are doing a large update, and one minor package has an error, you can't just skip it and continue on. It also means the button is misleading, since skipping implies that the rest of the installation process continues, while only part of the installation continues. Further, if you didn't want to continue the installation, there is already an "abort" button that lets you stop the installation. Reproducible: Always Steps to Reproduce: 1. Start the software management YaST2 module 2. Install a bunch of programs. 3. While one program is installing, disconnect your network connection. Wait for an error message to pop up. 4. Plug your network connection back in. 5. Click "skip" in the error message 6. Let the process finish Actual Results: The rest of the packages are downloaded, but nothing is installed Expected Results: The rest of the packages are downloaded, and everything that is successfully downloaded is installed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 701171] New: Wrong link in top of linked package
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=701171 https://bugzilla.novell.com/show_bug.cgi?id=701171#c0 Summary: Wrong link in top of linked package Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jweberhofer(a)weberhofer.at QAContact: adrian(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:2.0.1) Gecko/20100101 Firefox/4.0.1 The current web-interface shows within a linked package the following text: "This package links to the sources of the package phpMyAdmin of project server:php:applications. Show the diff and submit these changes back." The link provided with "server:php:applications" is wrong, it doesn't link to the original project but to package's project (e.g. home:weberho:server) itself. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 691103] New: after sound announces system is up, kde appears locked for 20-30 seconds, then clock starts ticking again.
by bugzilla_noreply＠novell.com 21 Jun '11

21 Jun '11

https://bugzilla.novell.com/show_bug.cgi?id=691103 https://bugzilla.novell.com/show_bug.cgi?id=691103#c0 Summary: after sound announces system is up, kde appears locked for 20-30 seconds, then clock starts ticking again. Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: 64bit OS/Version: openSUSE 11.4 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: WeedMIC(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:2.0.0) Gecko/20100101 Firefox/4.0 I found this was caused right after I had set ntp in yast to be in rootjail. Once I removed it from rootjail, it worked properly. I don't think it should lock up the system just b/c it is in rootjail. Reproducible: Always Steps to Reproduce: 1.set ntp to rootjail 2. 3. Actual Results: set ntp to rootjail logout and login Expected Results: system appears locked (you can accelerate the lock by moving the mouse) the ntp should have checked the time in rootjail without the user ever knowing it was happening. If this is not possible, then add a note near the option stating this will happen so people don't think the computer is broken and go to reinstall it from scratch or something drastic. I put it as minor, I mean how many people would try it? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3