April 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 633447] New: Update Installation from 11.2 to 11.3 fails with unbootable system
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=633447 https://bugzilla.novell.com/show_bug.cgi?id=633447#c0 Summary: Update Installation from 11.2 to 11.3 fails with unbootable system Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: vbargsten(a)freenet.de QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=384623) --> (http://bugzilla.novell.com/attachment.cgi?id=384623) zypper log of installation User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.6) Gecko/20100626 SUSE/3.6.6-1.2 Firefox/3.6.6 Initial state: opensuse 11.2 Update via installer stopped at ~90% of package installation with OK-messagebox saying that ~"command has faild with code 5". When I clicked OK, the gui-installer exited to the text mode one. Starting the gui installer then (again), the system was not found on partition. Grub has not been updated, however the initrd and vmlinuz symlinks could be used to start the system via grub console. I fixed grub then and restarted the installer for update which found the 11.3 system. Some packages installed and the installation finished; however, I am not sure all the packages are what they show in yast / if they have been really installed/updated or if they are just in package db. I found the log of failed install in /var/log/zypp/, see attachment Seems fetchmsttfonts is the cause; in my eyes the installation should go on in such case I used the repos oss, update, addon, packman, vlc Reproducible: Always Steps to Reproduce: see details Actual Results: unbootable system Expected Results: update finishing and bootable system -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 632737] New: remove Xorg setuid bit
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632737 https://bugzilla.novell.com/show_bug.cgi?id=632737#c0 Summary: remove Xorg setuid bit Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: Other OS/Version: Other Status: NEEDINFO Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: lnussel(a)novell.com ReportedBy: lnussel(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com CC: security-team(a)suse.de InfoProvider: sndirsch(a)novell.com Found By: --- Blocker: --- Time to re-evaluate the need for a setuid bit on /usr/bin/Xorg. It's needed for starting X as unprivileged user, e.g. via startx. That method is deprecated in favor of a display manager since years. Also modern environments rely on device ACLs and polkit privileges which in turn depend on consolekit tracking the active console. That doesn't work with startx anyways. So the setuid bit is of limited use by default anyways. No setuid bit also prevents exploitation of the kernel-heap-stack overflow problem via X as X cannot be started in a user controlled environment then. Therefore I'd like to remove the setuid bit on Xorg for 11.4 from /etc/permissions.easy (no packaging change in X needed). Those who really need it can still set it again in permissions.local. Any objections or concerns? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 38

[Bug 632602] New: /usr/share/icons/gnome/index.theme lacks "scalable" entries
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632602 https://bugzilla.novell.com/show_bug.cgi?id=632602#c0 Summary: /usr/share/icons/gnome/index.theme lacks "scalable" entries Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: ensonic(a)sonicpulse.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 The theme index lacks of the "scalable" entries. Thus all applications using svg based icons at custom size end up getting wrong sizes pngs or blurred correctly sized icons. Below is the change for the apps category. It needs to be done for all categories. # diff -u index.theme.old index.theme --- index.theme.old 2010-08-19 00:46:36.054803328 +0300 +++ index.theme 2010-08-19 00:34:50.549984410 +0300 @@ -198,7 +198,7 @@ PanelSizes=16,22,32,48,64,72,96,128 # Directory list -Directories=8x8/emblems,16x16/actions,16x16/animations,16x16/apps,16x16/categories,16x16/devices,16x16/emblems,16x16/emotes,16x16/mimetypes,16x16/places,16x16/status,22x22/actions,22x22/animations,22x22/apps,22x22/categories,22x22/devices,22x22/emblems,22x22/emotes,22x22/mimetypes,22x22/places,22x22/status,24x24/actions,24x24/apps,24x24/categories,24x24/devices,24x24/emblems,24x24/emotes,24x24/mimetypes,24x24/places,24x24/status,32x32/actions,32x32/animations,32x32/apps,32x32/categories,32x32/devices,32x32/emblems,32x32/emotes,32x32/mimetypes,32x32/places,32x32/status,48x48/actions,48x48/animations,48x48/apps,48x48/categories,48x48/devices,48x48/emblems,48x48/emotes,48x48/mimetypes,48x48/places,48x48/status,256x256/actions,256x256/apps,256x256/categories,256x256/devices,256x256/emblems,256x256/emotes,256x256/mimetypes,256x256/places,256x256/status +Directories=8x8/emblems,16x16/actions,16x16/animations,16x16/apps,16x16/categories,16x16/devices,16x16/emblems,16x16/emotes,16x16/mimetypes,16x16/places,16x16/status,22x22/actions,22x22/animations,22x22/apps,22x22/categories,22x22/devices,22x22/emblems,22x22/emotes,22x22/mimetypes,22x22/places,22x22/status,24x24/actions,24x24/apps,24x24/categories,24x24/devices,24x24/emblems,24x24/emotes,24x24/mimetypes,24x24/places,24x24/status,32x32/actions,32x32/animations,32x32/apps,32x32/categories,32x32/devices,32x32/emblems,32x32/emotes,32x32/mimetypes,32x32/places,32x32/status,48x48/actions,48x48/animations,48x48/apps,48x48/categories,48x48/devices,48x48/emblems,48x48/emotes,48x48/mimetypes,48x48/places,48x48/status,256x256/actions,256x256/apps,256x256/categories,256x256/devices,256x256/emblems,256x256/emotes,256x256/mimetypes,256x256/places,256x256/status,scalable/apps [8x8/emblems] Context=Emblems @@ -511,5 +511,12 @@ Size=256 MinSize=56 MaxSize=512 Type=Scalable + +[scalable/apps] +Context=Applications +Size=256 +MinSize=56 +MaxSize=512 +Type=Scalable Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 632543] New: yast2-ftp-server/vsftpd: fails to start in standalone mode: listen_ipv6=YES
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632543 https://bugzilla.novell.com/show_bug.cgi?id=632543#c0 Summary: yast2-ftp-server/vsftpd: fails to start in standalone mode: listen_ipv6=YES Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: i686 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: opensuse-wagnerm(a)arcor.de QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 Vsftpd fails to run in standalone mode because of the following part of vsftpd.conf (if it has been configured via YaST2): # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! listen_ipv6=YES YaST2 adds "listen=YES" at the end of the file. See vsftpd's man page: listen_ipv6 Like the listen parameter, except vsftpd will listen on an IPv6 socket instead of an IPv4 one. This parameter and the listen parameter are mutually exclusive. Default: NO Reproducible: Always Actual Results: 500 OOPS: run two copies of vsftpd for IPv4 and IPv6 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 632530] New: libcanberra.so failing to connect to pulseaudio results in menu hangs in Firefox
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632530 https://bugzilla.novell.com/show_bug.cgi?id=632530#c0 Summary: libcanberra.so failing to connect to pulseaudio results in menu hangs in Firefox Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pgngw+dev001+novell.com(a)f-m.fm QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.3 Firefox/3.6.8 as referenced @ https://bugzilla.mozilla.org/show_bug.cgi?id=567746 with Firefox ver >= 3.6.x on OpenSUSE 11.3, either native (@mozilla) or from repos (@opensuse), menu actions (@ toolbar, at bookmarks, @context menu, @ submenu ...) have a delayed response/action of ~5 secs -- if libcanberra is installed, but pulseaudio is missing: (1) no canberra, no pulseaudio ---> NO menu delay (2) with canberra, no pulseaudio ---> 5+ second menu delay (3) with canberra, with pulseaudio ---> NO menu delay it's been suggested that this is not an issue with firefox code, but rather with libcanberra code, and misselection of the optional pulseaudio dep instead of available alsa. i've provided debug info, stepwise reproducibility, etc @ the original bug. will provide add'l info here as requested -- i'm not sure what'd needed. a possibly (?) relevant comment @ #opensuse-gnome, <wolfiR> dev001: the delay happens with every menu action? <dev001> wolfiR: yes. @ toolbar, at bookmarks, @context menu, @ submenu ... <wolfiR> dev001: I see the difference with FF 3.5 <-> 3.6 that there is EVENT_MENU_POPUP in 3.6 which wasn't in 3.5 <wolfiR> dev001: that might explain the difference between both version [09:00] <wolfiR> dev001: still doesn't explain why it happens at all further referenced @ https://bugs.freedesktop.org/show_bug.cgi?id=29650 Sounds like a brokeness in OpenSUSE. ... this is not really a problem of libcanberra, nor of PA, and I am pretty sure it's just misconfiguration of opensuse. ... Please bring this to the attention of your distributor, thanks. [11:32] <mezcalero> ff is in no way special [11:33] <mezcalero> so it should be possible to reproduce this with canberra-gtk-play output as attachment -> https://bugs.freedesktop.org/attachment.cgi?id=37960 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 632271] New: [SDL] Segmentation fault when pressing on d-pad
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632271 https://bugzilla.novell.com/show_bug.cgi?id=632271#c0 Summary: [SDL] Segmentation fault when pressing on d-pad Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kamikazow(a)web.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 When I press on the d-pad of my game controller, any application that uses SDL immediately crashes with a segfault. Extreme TuxRacer prints: %%% etracer warning: joystick y axis mapped to axis 1 but joystick only has 1 axes Segmentation fault The bug seems to be the same or at least related to http://bugzilla.libsdl.org/show_bug.cgi?id=1041 Reproducible: Always # jstest /dev/input/js0 Driver version is 2.1.0. Joystick (PS2700 Rumble Pad) has 7 axes (X, Y, Z, Rx, Rz, Hat0X, Hat0Y) and 13 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn, TopBtn2, PinkieBtn, BaseBtn, BaseBtn2, BaseBtn3, BaseBtn4, BaseBtn5, BaseBtn6, BtnDead). Testing ... (interrupt to exit) Axes: 0:-32767 1:-32767 2:-32767 3:-32767 4:-32767 5: 0 6: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off 12:off -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 632250] New: /etc/at.deny has wrong account name www-data
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

https://bugzilla.novell.com/show_bug.cgi?id=632250 https://bugzilla.novell.com/show_bug.cgi?id=632250#c0 Summary: /etc/at.deny has wrong account name www-data Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jens.herden(a)email.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 In /etc/at.deny is an account www-data but the account on Suse for Apache is wwwrun! www-data is the account on Debian-like systems. I have not checked the other accounts. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 631319] New: intel_hda: sound stutters, aplay buffer underruns, alsa wakes for no reason
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631319 http://bugzilla.novell.com/show_bug.cgi?id=631319#c0 Summary: intel_hda: sound stutters, aplay buffer underruns, alsa wakes for no reason Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: jslaby(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=383026) --> (http://bugzilla.novell.com/attachment.cgi?id=383026) pulseaudio -v output I have the three issues in summary, but I don't know if they are relative to each other. When I run wine, the sound played in games stutter and effects are played with delays. If I try to play with aplay, sometimes I get underruns like: underrun!!! (at least 494,491 ms long) Status: state : XRUN trigger_time: 1281894363.393273000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 underrun!!! (at least 495,794 ms long) Status: state : XRUN trigger_time: 1281894363.896136000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 underrun!!! (at least 493,886 ms long) Status: state : XRUN trigger_time: 1281894364.401600000 tstamp : 0.000000 delay : 0 avail : 5482 avail_max : 22050 Dmesgs says: [60023.911007] CE: hpet increased min_delta_ns to 128142 nsec [60026.921175] CE: hpet increased min_delta_ns to 192213 nsec [60076.712008] pulseaudio[13943]: segfault at 7f8e06c3f110 ip 00007f8e06c3f110 sp 00007fffc1e07c18 error 4 in pulse-shm-492800760[7f8e07265000+4001000] [61486.633938] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [61656.184323] hrtimer: interrupt took 3104637 ns pulseaudio sometimes says: ALSA woke us up to write new data to the device, but there was actually nothing to write! I have it only in Czech from logs: alsa-sink.c: ALSA nás probudila z důvodu zápisu nových dat na zařízení, ale ve skutečnosti nebylo co zapisovat. alsa-sink.c: S největší pravděpodobností se jedná o chybu v ovladači ALSA "snd_hda_intel". Nahlaste prosím tento problém vývojářům ALSA. alsa-sink.c: Probudilo nás nastavení POLLOUT - nicméně následné snd_pcm_avail() vrátilo 0 či jinou hodnotu < min_avail. ratelimit.c: 60 events suppressed ratelimit.c: 30 events suppressed This was 3 seconds after "IRQ timing workaround" was activated above. Then there are hundreds of "events suppressed" All the other information are hopefully in alsa-info: http://www.alsa-project.org/db/?f=2b8f40d47bc5a0ba3499ab5fdf2d8aa8ebe980f8 Note that there is PA: Running - No, but the info was probably taken while the PA process was not alive. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 631305] New: dhcrelay segfaults at first request
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631305 http://bugzilla.novell.com/show_bug.cgi?id=631305#c0 Summary: dhcrelay segfaults at first request Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: andi-nbz(a)firstfloor.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); de; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 Simply configuring it to listen to a tap interface and forwarding to an external dhcp server: Aug 15 11:39:10 zeitgeber dhcrelay: Internet Systems Consortium DHCP Relay Agent 4.1.1-P1 Aug 15 11:39:10 zeitgeber dhcrelay: Copyright 2004-2010 Internet Systems Consortium. Aug 15 11:39:10 zeitgeber dhcrelay: All rights reserved. Aug 15 11:39:10 zeitgeber dhcrelay: For info, please visit https://www.isc.org/software/dhcp/ Aug 15 11:39:10 zeitgeber dhcrelay: Listening on LPF/tap0/ae:b8:8b:53:fe:7c Aug 15 11:39:10 zeitgeber dhcrelay: Sending on LPF/tap0/ae:b8:8b:53:fe:7c Aug 15 11:39:10 zeitgeber dhcrelay: Sending on Socket/fallback Request comming in: Aug 15 11:39:12 zeitgeber kernel: [41110.534756] dhcrelay[6641]: segfault at 0 ip 00007f3e759de20f sp 00007fff0822b680 error 4 in dhcrelay[7f3e759d1000+6d000] Running it under gdb gives Program received signal SIGSEGV, Segmentation fault. 0x00007ffff7f9f20f in do_relay4 (ip=<value optimized out>, packet=0x7fffffffcd40, length=<value optimized out>, from_port=<value optimized out>, from=..., hfrom=<value optimized out>) at dhcrelay.c:660 660 dhcrelay.c: No such file or directory. in dhcrelay.c (gdb) bt #0 0x00007ffff7f9f20f in do_relay4 (ip=<value optimized out>, packet=0x7fffffffcd40, length=<value optimized out>, from_port=<value optimized out>, from=..., hfrom=<value optimized out>) at dhcrelay.c:660 #1 0x00007ffff7fa7e80 in got_one (h=0x7ffff820d960) at discover.c:1393 #2 0x00007ffff7fd372b in omapi_one_dispatch (wo=<value optimized out>, t=0x0) at dispatch.c:520 #3 0x00007ffff7fa9e5a in dispatch () at dispatch.c:92 #4 0x00007ffff7f9f7ec in main (argc=<value optimized out>, argv=<value optimized out>) at dhcrelay.c:549 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 631263] New: yast2 printer doesn't set default when adding printer
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=631263 http://bugzilla.novell.com/show_bug.cgi?id=631263#c0 Summary: yast2 printer doesn't set default when adding printer Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: batpul(a)gmail.com QAContact: jsmeix(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 When adding a new printer to the system with yast2 printer then yast2 doesn't set the default flag, and neither does it allow me to set this flag myself before it finishes. So I have to restart the yast2 printer module to edit the added printer to set the default flag. I would like to see that yast2 automatically enables the default flag for the first printer, or else give me an opportunity to set it myself before I click the OK button. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4