November 2011 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 699458] New: local fs mount times out for loop-mounted filesystem
by bugzilla_noreply＠novell.com 11 Nov '13

11 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=699458 https://bugzilla.novell.com/show_bug.cgi?id=699458#c0 Summary: local fs mount times out for loop-mounted filesystem Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: volker3204(a)paradise.net.nz QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.6; Linux) KHTML/4.6.0 (like Gecko) SUSE The boot process gets stuck for 30 (40?) seconds trying to mount a local file-system, increasing boot time by that much. System configuration: /dev/md0 / reiserfs ... /dev/md1 /home reiserfs ... /dev/sda6 /local/data reiserfs ... /local/data/backup.ext2 /local/lastbackup auto loop,defaults,ro,auto Booting is stuck on mounting backup.ext2 until timeout occurs. At a guess, boot.localfs fails to notice that the backup.ext2 file is located on a filesystem that is not yet mounted, hence attempting to mount it can not succeed. Used to work fine on oS 11.1. A similar problem for shutdown also prevents clean shutdown (although this is not the only problem preventing clean shutdowns). Neither /dev/sda6 nor /dev/md0 are unmounted during shutdown. /dev/md0 can't be unmounted because it has the mount point for a file from /dv/sda6, /dev/sda6 can't be un-mounted because one of its files remains in use. Reproducible: Always Steps to Reproduce: 1. Create system file-system config as detailed. 2. Reboot. 3. Watch boot screen. Expected Results: Mount file-systems in correct order at boot time. Un-mount file-systems in correct order during shutdown. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 680622] New: check_gcc_output mixes several files with same name
by bugzilla_noreply＠novell.com 11 Nov '13

11 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=680622 https://bugzilla.novell.com/show_bug.cgi?id=680622#c0 Summary: check_gcc_output mixes several files with same name Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: chrubis(a)novell.com QAContact: adrian(a)novell.com Found By: --- Blocker: --- It's common that in bigger projects source files are split between several directories which allows for having several source files with same name. That will however generate confusing check_gcc_output output. The lines containing errors for these files will be merged into "filename: line1 line2 line3" where lineX may be from just any of these source files. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 679810] New: openSUSE:Tools/osc: Bug
by bugzilla_noreply＠novell.com 11 Nov '13

11 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=679810 https://bugzilla.novell.com/show_bug.cgi?id=679810#c0 Summary: openSUSE:Tools/osc: Bug Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: 3rd party software AssignedTo: adrian(a)novell.com ReportedBy: viliam.pucik(a)gmail.com QAContact: opensuse-communityscreening(a)forge.provo.novell.com Found By: --- Blocker: --- osc incorectly interprets macros if they are set in %if/%endif: In this example, "prerelease" macro should be interpeted as undefined, but osc thinks, it is defined and contains "pre1": --- BEGIN: part of rsync.spec taken from RHEL 6 %define isprerelease 0 %if %isprerelease %define prerelease pre1 %endif Summary: A program for synchronizing files over a network Name: rsync Version: 3.0.6 Release: 5%{?prerelease}%{?dist} Group: Applications/Internet URL: http://rsync.samba.org/ Source0: ftp://rsync.samba.org/pub/rsync/rsync-%{version}%{?prerelease}.tar.gz .. --- END $ cd rsync $ ls rsync-3.0.6-permissions.patch rsync-3.0.6.tar.gz rsync-patches-3.0.6.tar.gz rsync.spec rsync.xinetd $ osc ci rsync-3.0.6pre1.tar.gz mentioned in spec file does not exist. rsync-patches-3.0.6pre1.tar.gz mentioned in spec file does not exist. Attention, rsync-3.0.6.tar.gz is not mentioned in spec files as source or patch. Is this correct? [N/y/d] -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 639396] New: Won't boot inside openvz container because of the permissions /etc/init.d/boot mount devpts with.
by bugzilla_noreply＠novell.com 11 Nov '13

11 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=639396 https://bugzilla.novell.com/show_bug.cgi?id=639396#c0 Summary: Won't boot inside openvz container because of the permissions /etc/init.d/boot mount devpts with. Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: openSUSE 11.3 Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: rob.fortune(a)live.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US) AppleWebKit/534.7 SUSE/7.0.513.0 (KHTML, like Gecko) Chrome/7.0.513.0 Safari/534.7 System fails to boot because the pts are unavailable to the host system. Reproducible: Always Steps to Reproduce: 1. Get a VPS in OpenVZ 2. Try and boot it 3. Actual Results: Boot fails, can't login with "fake serial console" either because it can't get a pty Expected Results: Boot to work. Here are the changes I made to /etc/init.d/boot to make it work. You could add detection for being run under openvz and mount devpts differently. --- boot.orig 2010-09-15 06:46:45.000000000 +0000 +++ boot 2010-09-15 06:03:35.000000000 +0000 @@ -24,8 +24,9 @@ # # Standard input from the system console # -test -z "$CONSOLE" && CONSOLE=/dev/console REDIRECT="$(showconsole 2>/dev/null)" +CONSOLE="$REDIRECT" +#test -z "$CONSOLE" && CONSOLE=/dev/console export CONSOLE REDIRECT # @@ -96,16 +97,16 @@ fi fi -DTYPE=$(stat -f -c "%T" /dev 2>/dev/null) -if test "$DTYPE" != "tmpfs" ; then - echo -n "Mounting devtmpfs at /dev" - mount -n -t $DEVTMPFS -o mode=0755 $DEVTMPFS /dev - rc_status -v -r -fi - -echo -n "Copying static /dev content" -cp -axT --remove-destination /lib/udev/devices /dev -rc_status -v -r +#DTYPE=$(stat -f -c "%T" /dev 2>/dev/null) +#if test "$DTYPE" != "tmpfs" ; then +# echo -n "Mounting devtmpfs at /dev" +# mount -n -t $DEVTMPFS -o mode=0755 $DEVTMPFS /dev +# rc_status -v -r +#fi + +#echo -n "Copying static /dev content" +#cp -axT --remove-destination /lib/udev/devices /dev +#rc_status -v -r if test "$(stat -Lc %d /dev/shm 2>/dev/null)" = "$(stat -Lc %d /dev/shm/.. 2>/dev/null)" ; then echo -n "Mounting tmpfs at /dev/shm" @@ -118,14 +119,14 @@ if test "$DTYPE" != "devpts" ; then echo -n "Mounting devpts at /dev/pts" mkdir -p -m 755 /dev/pts - mount -n -t devpts -o mode=0620,gid=5 devpts /dev/pts + mount -n -t devpts -o defaults devpts /dev/pts rc_status -v -r fi # # Set I/O of this script and its childs to console # -exec 0<> $CONSOLE 1>&0 2>&0 +#exec 0<> $CONSOLE 1>&0 2>&0 # # Should we ask for interactive boot mode -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 626333] New: group lock does not exist while installing the filesystem package
by bugzilla_noreply＠novell.com 11 Nov '13

11 Nov '13

http://bugzilla.novell.com/show_bug.cgi?id=626333 http://bugzilla.novell.com/show_bug.cgi?id=626333#c0 Summary: group lock does not exist while installing the filesystem package Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Enhancement Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: lmuelle(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.7) Gecko/20100714 SUSE/3.6.7-0.1.1 Firefox/3.6.7 Installation von: filesystem-11.3-1.2 [fertig] Zusätzliche rpm-Ausgabe: warning: group lock does not exist - using root Reproducible: Always Steps to Reproduce: Performed an upgrade from 11.2 to 11.3 via zypper dup. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 729796] New: mdns reenabled during upgrade
by bugzilla_noreply＠novell.com 07 Nov '13

07 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=729796 https://bugzilla.novell.com/show_bug.cgi?id=729796#c0 Summary: mdns reenabled during upgrade Classification: openSUSE Product: openSUSE 12.1 Version: RC 2 Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: hamann.w(a)t-online.de QAContact: jsrain(a)suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de-AT; rv:1.6) Gecko/20040113 upgrade installation (from 11.4 to 12.1 - same happened when upgrading to 11.4) activates avahi-daemon and modifies /etc/nsswitch.conf to use mdns-minimal Reproducible: Always Steps to Reproduce: 1. insert installation media, choose upgrade .... 2. 3. Actual Results: after installation avahi was active, and .local resolution used mdns Since the remainder of the network uses port 53 dns, local name resolution failed Expected Results: preserve old settings. There are very few reasons why one would have turned off mdns. These include a) existing network with .local name scheme b) no network at all (just a single computer connected to the internet) c) incompatible hardware on an existing network (e.g. printers and telephones that respond to mdns but do not allow setting of meaningful names) Neither of these reasons can be expected to change by upgrading a system May I also add a suggestion for enhancement: during a fresh install there is a warning against using .local domain. Could there be an option to disable mdns or a link to instructions? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 712508] New: rpmbuild of mysql-community-server-5.1.53-4.7.1 fails
by bugzilla_noreply＠novell.com 06 Nov '13

06 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=712508 https://bugzilla.novell.com/show_bug.cgi?id=712508#c0 Summary: rpmbuild of mysql-community-server-5.1.53-4.7.1 fails Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: leroy.nick(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/15.0.846.0 Safari/535.1 SUSE/15.0.846.0 It looks as though most of the build succeeds, but it then fails in the verification stages (see below). I've tried building 5.5.14-1.1 (from the 'openSUSE BuildService - Database' repo), with similar results. I've also tried this build on several different openSUSE 11.4 machines, with similar results. Finally, I've tried building mysql-community-server-5.1.46-2.18 on an openSUSE 11.3 machine -- this succeeds. I haven't tried building this source package on an 11.4 machine (yet). Please let me know what further information I can provide. Thanks -Nick Reproducible: Always Steps to Reproduce: 1.zypper si mysql-community-server 2.rpmbuild -bb mysql-community-server.spec Actual Results: ... INFO: relinking /usr/sbin/rcmysql -> /etc/init.d/mysql (was ./../etc/init.d/mysql) Processing files: mysql-community-server-5.1.53-4.7.1.x86_64 error: File not found by glob: /usr/src/packages/BUILDROOT/mysql-community-server-5.1.53-4.7.1.x86_64/etc/mysql/* RPM build errors: File not found by glob: /usr/src/packages/BUILDROOT/mysql-community-server-5.1.53-4.7.1.x86_64/etc/mysql/* -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 710794] New: mysql-community-server: Wrong Default-Start in init script
by bugzilla_noreply＠novell.com 06 Nov '13

06 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=710794 https://bugzilla.novell.com/show_bug.cgi?id=710794#c0 Summary: mysql-community-server: Wrong Default-Start in init script Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: All OS/Version: openSUSE 11.4 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: lauffer(a)ph-freiburg.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0 In the init script of the mysql-community-server-5.1.53-4.7.1.x86_64 (openSUSE-11.4 final) we have in /etc/init.d/mysql line 19: # Default-Start: 2 3 5 Right is not trying to start in runlevel 2. The factory build of the mysql-community-server is already fixed. This is just a reminder to merge this fix in a further 11.4 update package. Reproducible: Always Steps to Reproduce: 1. insserv /etc/init.d/mysql if mysql-community-server is installed ends in a insserv warning that there is no network in runlevel 2... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 730904] New: mysqld.service not found
by bugzilla_noreply＠novell.com 06 Nov '13

06 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=730904 https://bugzilla.novell.com/show_bug.cgi?id=730904#c0 Summary: mysqld.service not found Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: dominian(a)slackadelic.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:8.0) Gecko/20100101 Firefox/8.0 Trying to start mysqld with rc.mysqld start or systemctl start mysqld.service results in mysqld not running saying file not found. destiny:~ # systemctl start mysqld.service Failed to issue method call: Unit mysqld.service failed to load: No such file or directory. See system logs and 'systemctl status mysqld.service' for details. destiny:~ # systemctl status mysqld.service mysqld.service Loaded: error (Reason: No such file or directory) Active: inactive (dead) Reproducible: Always Steps to Reproduce: 1. chkconfig mysqld on 2. try to start mysqld with rcmysqld start or systemctl start mysqld.service 3. failure Actual Results: Mysqld fails to start with mysqld.service not found Expected Results: mysqld starting and working -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 668173] New: [SMBTA] WebYast module to control smbtad
by bugzilla_noreply＠novell.com 06 Nov '13

06 Nov '13

https://bugzilla.novell.com/show_bug.cgi?id=668173 https://bugzilla.novell.com/show_bug.cgi?id=668173#c0 Summary: [SMBTA] WebYast module to control smbtad Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: Other OS/Version: Other Status: ASSIGNED Severity: Enhancement Priority: P5 - None Component: Samba AssignedTo: bgeuken(a)novell.com ReportedBy: hhetter(a)novell.com QAContact: samba-maintainers(a)SuSE.de CC: hhetter(a)novell.com, mhaefner(a)novell.com, bbrunner(a)novell.com Found By: --- Blocker: --- During hackweek Björn took a look at SMBTA and made first steps to create a webyast module to control smbtad, which would be a killer feature for sure. Lots of IRC communication has passed. This stuff is totally in development, and no timeline or anything similar can be given at the moment. I created this bug for us to track the status of that idea, and of course this bug will not be blocking any release tracker bug. Stored as "Enhancement". I would be happy if Björn would update the status of this development in this bug from time to time ! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9