September 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 591700] New: System fails to boot after "zypper up" from 11.3 M2 to M4
by bugzilla_noreply＠novell.com 15 Aug '14

15 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=591700 http://bugzilla.novell.com/show_bug.cgi?id=591700#c0 Summary: System fails to boot after "zypper up" from 11.3 M2 to M4 Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 4 Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Bootloader AssignedTo: jsrain(a)novell.com ReportedBy: kkaempf(a)novell.com QAContact: jsrain(a)novell.com Found By: Development Blocker: --- /boot/grub/menu.lst is wrong after "zypper up" (see attachment) - It contains multiple entries (2.6.33-5-default, which is not installed) - The first entries have the wrong disk ( hd(1,0) vs hd(0,0) ) - The second entries have the wrong kernel ( 2.6.33-5 vs 2.6.3-6 ) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 77

[Bug 618286] New: RAID1 installation makes multiboot system completely unbootable (active flag removed with standard MBR code)
by bugzilla_noreply＠novell.com 15 Aug '14

15 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=618286 http://bugzilla.novell.com/show_bug.cgi?id=618286#c0 Summary: RAID1 installation makes multiboot system completely unbootable (active flag removed with standard MBR code) Classification: openSUSE Product: openSUSE 11.3 Version: RC 1 Platform: x86 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Bootloader AssignedTo: jsrain(a)novell.com ReportedBy: mrmazda(a)earthlink.net QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=372494) --> (http://bugzilla.novell.com/attachment.cgi?id=372494) y2logs to reproduce: 1-partition multiboot and suitably format partitions 2-install standard MBR code 3-install DOS and/or Windows and/or OS/2 to standard primary partition(s) 4-install other distros to md devices comprised exclusively of logical partitions 5-configure a bootloader on some primary partition 6-set a primary partition active 7-test that every installed OS will boot 8-install RC1 to an md device comprised exclusively of logical partitions, specifying via the checkbox custom partition in (grub) bootloader configuration and leaving active flag checkbox checked actual behavior: 1-system will not boot anything from any HD 2-active flags are missing from all primary partitions expected behavior: 1-active flags remain as they were prior to installation 2-all previously bootable operating systems remain bootable as before 3-RC1 can be booted via chainload and/or configfile from pre-existing Grub on custom boot partition Notes: On installations to non-primary partitions there should never be any reason to touch active flags on existing primary partitions, particularly when YaST is not called upon to alter any partition tables (make no changes to _any_ partitions). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 575096] New: system locks are not handled in chroot
by bugzilla_noreply＠novell.com 14 Aug '14

14 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=575096 http://bugzilla.novell.com/show_bug.cgi?id=575096#c0 Summary: system locks are not handled in chroot Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: zypp-maintainers(a)forge.provo.novell.com ReportedBy: ug(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- I call: zypper --root /tmp/YaST2-09485-IZ7pT1 --gpg-auto-import-keys --non-interactive ar http://taylor/SLES11_x86_64/DVD1/ main-source and I get: System management is locked by the application with pid 9485 (/usr/lib/YaST2/bin/y2base) because there is a yast running in parallel. Since I work with zypper in a chroot environment, the "outside" lock done by yast should not block my chroot zypper call. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 539219] New: enter proxy during installation
by bugzilla_noreply＠novell.com 11 Aug '14

11 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=539219 Summary: enter proxy during installation Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: i686 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fintobersaglio(a)yahoo.it QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; it; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-3.4 Firefox/3.5.2 is possible add a voice during the installation for set a proxy? thanks by Andrea Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 535456] New: K3b Crashes when Ripping audio from a CD
by bugzilla_noreply＠novell.com 09 Aug '14

09 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=535456 Summary: K3b Crashes when Ripping audio from a CD Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Critical Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: monsieur.goatse+novell(a)gmail.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=315853) --> (http://bugzilla.novell.com/attachment.cgi?id=315853) Backtrace of crash using FLAC User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-1.1 Firefox/3.5.2 While ripping audio from a CD in K3B it sometimes crashes using the FLAC or mp3 encoders, ogg seems to be working fine. Here is the KDE Bugzilla page, this bug has been reported several times by all users of OpenSuSE 11.1: https://bugs.kde.org/show_bug.cgi?id=198015 Reproducible: Sometimes Steps to Reproduce: 1.Open K3B 2.Insert an Audio CD 3.Start ripping the CD using K3B & the FLAC codec 4.After a few songs (usually 3-4) there is a crash Actual Results: Crash Expected Results: Rip the CD with no problems -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 586960] New: fate #305945 causes extreme update channel metadata overhead
by bugzilla_noreply＠novell.com 08 Aug '14

08 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=586960 http://bugzilla.novell.com/show_bug.cgi?id=586960#c0 Summary: fate #305945 causes extreme update channel metadata overhead Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: SLES 11 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: mmarek(a)novell.com QAContact: qa(a)suse.de CC: tschmidt(a)novell.com, ihno(a)novell.com, coolo(a)novell.com, meissner(a)novell.com, mge(a)novell.com, okir(a)novell.com, ro(a)novell.com, visnov(a)novell.com, dmueller(a)novell.com Found By: --- Blocker: No +++ This bug was initially created as a clone of Bug #582907 (for SLE) +++ while investigating why the metadata of the 11.2 update channel grew, we noticed that every kernel-* flavor now exports around 8000-9000 provides, which add to about 3.5 MB of compressed (!) primary.xml.gz overhead. for opensuse 11.2, this overhead is fixed, however for SLE11-SP1 it will grow overtime, because we never delete old packages from SLE update channel. that means if we do kernel updates for 7 years (roughly 1 kernel update per month), we'll have 210 MB (!) of compressed metadata just for the kernel, which means 8 minutes of download time for an average DSL connection. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 615779] New: Lynnfield (Core i5) is underperforming
by bugzilla_noreply＠novell.com 08 Aug '14

08 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=615779 http://bugzilla.novell.com/show_bug.cgi?id=615779#c0 Summary: Lynnfield (Core i5) is underperforming Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: vincent.lejeune(a)institutoptique.fr QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux; fr-FR) AppleWebKit/532.4 (KHTML, like Gecko) konqueror/4.4.3 Safari/532.4 Performances are quite bad with core i5 hardware. I have a laptop with a core i5 430M (2,27 Ghz), and my opensuse is slower than ubuntu by about 20% for mathematical operations. It is even worse when comparing with windows, which is 4 times faster for doing the same computation ! The program used to do benchmark is below. The performance are the same when using gcc and when using icc. Reproducible: Always Steps to Reproduce: 1. Download Eigen 3 dev version 2. Build the program below with O3, -msse4.2, with include pointing to Eigen source 3. Look at the results Actual Results: ~8s Expected Results: less than 8s The sample program is : #include <Eigen/QR> #include <ctime> #include <iostream> using namespace Eigen; typedef Matrix<double,Dynamic,Dynamic> MAT; int main() { MAT A=MAT::Random(2048,2048); clock_t t0=clock(); HouseholderQR<MAT> qr(A); clock_t t1=clock(); double T=t1-t0; T/=CLOCKS_PER_SEC; std::cout<<T; return 0; } Obviously you need to set the include to Eigen source with the -I flag to pass to gcc. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 555641] New: suspend to disk with nvidia propriatary drivers won't resume if 2 local X sessions are open.
by bugzilla_noreply＠novell.com 08 Aug '14

08 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=555641 Summary: suspend to disk with nvidia propriatary drivers won't resume if 2 local X sessions are open. Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: pellice(a)yahoo.fr QAContact: qa(a)suse.de Found By: --- Blocker: --- --- Comment #0 from alexis Pellicier <pellice(a)yahoo.fr> 2009-11-15 16:01:07 UTC --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; fr; rv:1.9.1.4) Gecko/20091016 SUSE/3.5.4-1.1.2 Firefox/3.5.4 suspend to disk with powersave -U works like a charme if just one session is open. (nice sleeping pingouin with progress bar when suspending/resuming) If two X session are open I've got garbage on the screen when suspending and the system won't resume. (Go till a black screen writtin resuming... for ever with no ability to switch console) I'm using nvidia nvidia-gfxG02-kmp-default-190.42_2.6.31.5_0.1-8.2.x86_64 from nvidia repo. It was working perfectly with opensuse 11.1 Reproducible: Always Steps to Reproduce: 1. open two kde sessions 2. powersave -U 3. Actual Results: -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 626409] New: Since a Kernel-update the Touchpad and Trackpoint will not function
by bugzilla_noreply＠novell.com 07 Aug '14

07 Aug '14

http://bugzilla.novell.com/show_bug.cgi?id=626409 http://bugzilla.novell.com/show_bug.cgi?id=626409#c0 Summary: Since a Kernel-update the Touchpad and Trackpoint will not function Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: bodow(a)snafu.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-1.1 Firefox/3.6.8 I have a Lenovo SL 500 Laptop and have the a problem with the hardware-detection of the Touchpad an the Trackpoint under 11.2-64bit With 11.1 everything works fine. Everytime after booting there is no Trackpoint/Touchpad detected. But i do not think, that the problem is hal. I looked in my system and see hal etc. is installed in December and i know, that everything works in January. I made a little bit investigation and wrote the output of lshal, lsmod, lsusb, hwinfo and lspci in a file (working and not working). The difference in hal is that there are some devices not detected if Trackpoint/Touchpad is not working. These devices are: info.product = 'i8042 AUX3 port' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) info.product = 'Synaptics pass-through' (string) info.product = 'TPPS/2 IBM TrackPoint' (string) info.product = 'i8042 AUX2 port' (string) info.product = 'i8042 AUX1 port' (string) info.product = 'i8042 AUX0 port' (string) info.product = 'R5C843 MMC Host Controller' (string) No difference in lspci. In lsmod is a difference, the modules ricoh_mmc and serio_raw will not be loaded if the devices Trackpoint/Touchpad are not detected. Reproducible: Always Steps to Reproduce: 1.Install openSUSE 11.2-64bit from DVD 2.Do an update from the update repo 3.No more Trackpoint/Touchpad Actual Results: I did a little bit testing. I installed a test-Kernel from the Kernel-repo (2.6.34-44 and 2.6.34-48) and then after rebooting with the new Kernel everything works. So i wrote above, in January it was ok with the original Kernel. Then came an update in March or early April and then it happens. In 11.3 it is ok with the delivered Kernel. Expected Results: Trackpoint and Touchpad should be detected and work. It´s a Lenovo SL 500 Laptop with Intel Graphic GS 9300M, 4GB RAM, 320GB hdd and Intel(R) Core(TM)2 Duo CPU P7370 @ 2.00GHz If you need the outputs from lshal, lsusb, hwinfo or boot.msg let me know. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 637455] New: gutenprint: run cups-genppdupdate in RPM post-install
by bugzilla_noreply＠novell.com 30 Jul '14

30 Jul '14

https://bugzilla.novell.com/show_bug.cgi?id=637455 https://bugzilla.novell.com/show_bug.cgi?id=637455#c0 Summary: gutenprint: run cups-genppdupdate in RPM post-install Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: All OS/Version: SuSE Other Status: ASSIGNED Severity: Enhancement Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: jsmeix(a)novell.com Found By: Development Blocker: --- See "Regarding CUPS PPD files" in https://bugzilla.novell.com/show_bug.cgi?id=514994#c9 The README file in the Gutenprint sources reads: ------------------------------------------------------------------- If you attempt to use a version of Gutenprint with PPD files not built for that precise version, the driver will fail ------------------------------------------------------------------- so that existing print queues must be re-setup in any case (or the special tool "...genppdupdate..." can be used but I wonder what is easier for a normal user in the end). Robert Krawitz, the main-author of Gutenprint suggested to run cups-genppdupdate in RPM post-install: ----------------------------------------------------------------------- From: Robert Krawitz Cc: gimp-print-devel(a)lists.sourceforge.net Subject: ... How to compile Gutenprint with DefaultPageSize A4 ? .. My suggestion would be for the RPM package to have a post-install that runs cups-genppdupdate. If you think that that's too big of a hammer, or that you want some way of distinguishing between PPD files you supply and those produced by another copy of Gutenprint, we can suggest solutions. cups-genppdupdate is designed to be really simple and should be a lot easier than destroying and re-creating queues (and getting all the options right). ----------------------------------------------------------------------- -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10