September 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 616765] New: IPv6 not enabled in Yast, yet dhclient spams logs with ipv6 failures
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616765 http://bugzilla.novell.com/show_bug.cgi?id=616765#c0 Summary: IPv6 not enabled in Yast, yet dhclient spams logs with ipv6 failures Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100317 SUSE/3.5.9-0.1.1 Firefox/3.5.9 yast2 lan shows that IPv6 is *not* enabled, however dhclient spams /var/log/messages with this: Jun 23 10:18:16 frank dhclient: dhc6: send_packet6() sent -1 of 54 bytes Jun 23 10:20:19 frank dhclient: XMT: Solicit on eth3, interval 120440ms. Jun 23 10:20:19 frank dhclient: send_packet6: Cannot assign requested address Jun 23 10:20:19 frank dhclient: dhc6: send_packet6() sent -1 of 54 bytes Jun 23 10:22:19 frank dhclient: XMT: Solicit on eth3, interval 129180ms. Jun 23 10:22:19 frank dhclient: send_packet6: Cannot assign requested address Jun 23 10:22:19 frank dhclient: dhc6: send_packet6() sent -1 of 54 bytes Jun 23 10:24:29 frank dhclient: XMT: Solicit on eth3, interval 123410ms. Jun 23 10:24:29 frank dhclient: send_packet6: Cannot assign requested address Jun 23 10:24:29 frank dhclient: dhc6: send_packet6() sent -1 of 54 bytes Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 31

[Bug 616745] New: sort -V works equal than sort
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616745 http://bugzilla.novell.com/show_bug.cgi?id=616745#c0 Summary: sort -V works equal than sort Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Diego.Saravia(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; es-AR; rv:1.9.2.3) Gecko/20100423 Ubuntu/10.04 (lucid) Firefox/3.6.3 in opensuse 11.3 echo -e "100\n12" | sort -V 100 12 in ubuntu 12 100 Reproducible: Always Steps to Reproduce: 1.echo -e "100\n12" | sort -V 2. 3. Actual Results: 100 12 Expected Results: 12 100 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 616708] New: "perform installation" should report number/size of packages being "downloaded in advance" when that option is set
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616708 http://bugzilla.novell.com/show_bug.cgi?id=616708#c0 Summary: "perform installation" should report number/size of packages being "downloaded in advance" when that option is set Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: i686 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: postdoc38(a)yahoo.fr QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100317 SUSE/2.0.4-3.2 SeaMonkey/2.0.4 This is maybe more of a wish than a bug report. But, anyway, here goes: For personal reasons, I like to set the following option in /etc/zypp/zypp.conf: commit.downloadMode = DownloadInAdvance In this case, IMHO, the "perform installation" screen should have two progress bars, one showing how much of the current package is being downloaded, and one showing how many more packages are to be downloaded, then installed. As it is now, the "bottom" progress bar stays at 0% while downloading, giving no clue as to whether this will take ages or just a few seconds more... Too bad! Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 616706] New: Yast Printer Connection Wizard requires ICMP echo to be open when adding a network printer when it should only require that the TCP port the printer is listening on be open.
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616706 http://bugzilla.novell.com/show_bug.cgi?id=616706#c0 Summary: Yast Printer Connection Wizard requires ICMP echo to be open when adding a network printer when it should only require that the TCP port the printer is listening on be open. Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: i586 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: chris(a)ia.gov QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100317 SUSE/3.5.9-0.1.1 Firefox/3.5.9 When adding a printer via the Yast Printer Connection wizard and selecting TCP as the connection method, adding a printer fails even if the specified tcp port is open and reachable, if ICMP echo is not also allowed. ICMP echo should not be a requirement for adding a remote printer. A simple tcp ping on the specified port should be good enough, syn, syn/ack, ack. Reproducible: Always Steps to Reproduce: 1.Add a printer from Yast. 2.Choose the connection Wizard 3.Choose TCP and fill in the blanks with the destination being a printer in a network that the client does not have ICMP echo open to. (remote printer is Firewalled, access listed, etc...) 4.Test the connection. Actual Results: Observed with TCP dump that the connection wizard was attempting ICMP echo to the printer ip address and then failing without ever attempting a tcp connection on the port specified. (Telnet from console on the tcp port to the printer works fine) Expected Results: Connection wizard should not rely on ICMP echo to check the availability of a device. A connection to the actual TCP port specified should instead be attempted. Thanks! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 616687] New: yast2 fails to read autodetected_print_queues.ycp when printer description string contains quotes
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616687 http://bugzilla.novell.com/show_bug.cgi?id=616687#c0 Summary: yast2 fails to read autodetected_print_queues.ycp when printer description string contains quotes Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: schmuker(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- Created an attachment (id=371172) --> (http://bugzilla.novell.com/attachment.cgi?id=371172) snippet from my y2log which led me to the workaround. User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.4) Gecko/20100527 SUSE/3.6.4-2.4 Firefox/3.6.4 When setting a printer description in yast2 that contains quotes (such as '' 42" roll printer ''), yast2 fails to re-read the printer queue afterwards. It displays an error message "failed to read /var/lib/YaST2/autodetected_print_queues.ycp. The yast2 log shows that it fails when re-reading /var/lib/YaST2/autodetected_print_queues.ycp (see attached y2log snippet). Yast2 printer then permanently fails, and not printers can be configured anymore. Previously configures printers keep working, though. To recover, I had to change the printer description string in /etc/printcap, /etc/cups/printers.conf and /etc/cups/printers.conf.0, removing the ". Afterwards, everything is back to normal. Reproducible: Always Steps to Reproduce: 1. add a printer with yast2. 2. edit the printer entry, use " anywhere in the description string 3. click "finish" Actual Results: Yast2 fails to read /var/lib/YaST2/autodetected_print_queues.ycp and displays an error message. Printer configuration from now on permanently fails for this reason. Expected Results: Yast2 does not fail, but catch entering quotes in the description string. This bug is also present in 11.2. I guess a check in yast2 whether the description string (probably also the location?) contains " will fix this bug. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 616617] New: Cannot use swap file on BtrFS
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616617 http://bugzilla.novell.com/show_bug.cgi?id=616617#c0 Summary: Cannot use swap file on BtrFS Classification: openSUSE Product: openSUSE 11.3 Version: RC 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: silviu_marin-caea(a)otpbank.ro QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.4) Gecko/20100527 SUSE/3.6.4-2.2 Firefox/3.6.4 I know that I'm not supposed to report bugs for BtrFS, but I'm doing this for next openSUSE version. Just close with INVALID if this bugreport is not appropriate. The bug: Cannot use a swapfile on BtrFS, error is: Invalid argument. On the same computer and hard-disk, I can use a swap file created on a different ext4 partition. Reproducible: Always Steps to Reproduce: silviu:~ # cd /var/tmp silviu:/var/tmp # dd if=/dev/zero of=swapfile bs=1M count=1024 1024+0 records in 1024+0 records out 1073741824 bytes (1.1 GB) copied, 18.633 s, 57.6 MB/s silviu:/var/tmp # mkswap swapfile mkswap: swapfile: warning: don't erase bootbits sectors on whole disk. Use -f to force. Setting up swapspace version 1, size = 1048572 KiB no label, UUID=c356f0ff-1524-4b99-88f9-94465d555161 silviu:/var/tmp # chmod 0600 swapfile silviu:/var/tmp # swapon -v swapfile swapon on swapfile swapon: /var/tmp/swapfile: found swap signature: version 1, page-size 4, same byte order swapon: /var/tmp/swapfile: pagesize=4096, swapsize=1073741824, devsize=1073741824 swapon: swapfile: swapon failed: Invalid argument Actual Results: Cannot use swap file Expected Results: Should be able to use the swap file -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 616355] New: Uses 11.2 community repository definition files
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616355 http://bugzilla.novell.com/show_bug.cgi?id=616355#c0 Summary: Uses 11.2 community repository definition files Classification: openSUSE Product: openSUSE 11.3 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Patterns AssignedTo: coolo(a)novell.com ReportedBy: binner(a)kde.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.4) Gecko/20100417 SUSE/3.6.4-2.2 Firefox/3.6.4 The RC1 release uses openSUSE_112_Default.xml / openSUSE_112_Additional.xml Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 616275] New: xfce: add missing dependency
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616275 http://bugzilla.novell.com/show_bug.cgi?id=616275#c0 Summary: xfce: add missing dependency Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: All OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Xfce AssignedTo: bnc-team-xfce(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- When installing Xfce into a previously existing system (by using, for example, yast or zypper in xfce4-{panel,desktop,etc.}, one still gets a start menu which has missing icons, that is, the icon is a file with a red X in it. Comparing with a fresh install where xfce was preselected, I notice that gtk2-metatheme-gilouche is the missing package. xfce-branding-openSUSE should depend on gtk2-metatheme-gilouche. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 616263] New: ethtool has no way to turn off gro
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616263 http://bugzilla.novell.com/show_bug.cgi?id=616263#c0 Summary: ethtool has no way to turn off gro Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: richard.coe(a)med.ge.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.9) Gecko/20100317 SUSE/3.5.9-0.1.1 Firefox/3.5.9 GTB7.0 ethtool-6 has no way to turn off gro. ethtool 2.6.33 added support for gro 'generic-recieve-offload' The intel ethernet driver defaults to gro on. Due to a bug in the network driver with some network transfers, this yields to networking errors which slows network transfers to be very degraded. Turning off gro restores network performance. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 616229] New: Akonadi Console installed by default
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=616229 http://bugzilla.novell.com/show_bug.cgi?id=616229#c0 Summary: Akonadi Console installed by default Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Applications AssignedTo: kde-maintainers(a)suse.de ReportedBy: binner(a)kde.org QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.4) Gecko/20100611 SUSE/3.6.4-7.1 Firefox/3.6.4 Akonadi Console shouldn't be installed by default as it is to quote itself "purely a developement tool" with which you "risk to damage or losing your pim data". Suggestion: move it to kdepim4-devel package. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4