August 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 598193] New: udev deletes device nodes
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=598193 http://bugzilla.novell.com/show_bug.cgi?id=598193#c0 Summary: udev deletes device nodes Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 5 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: kasievers(a)novell.com ReportedBy: aschnell(a)novell.com QAContact: qa(a)suse.de Found By: Development Blocker: --- udevd deletes the devices /dev/dm-X for LVM logical volumes during the installation from the GNOME Live CD. The delete is not logged with udevadm monitor but can be observed with audit. See attached logs. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 125

[Bug 598075] New: selinux stops boot process with updated mkinitrd.
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=598075 http://bugzilla.novell.com/show_bug.cgi?id=598075#c0 Summary: selinux stops boot process with updated mkinitrd. Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 5 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: kkaempf(a)novell.com QAContact: qa(a)suse.de CC: sndirsch(a)novell.com Found By: Development Blocker: --- Reference: https://bugzilla.novell.com/show_bug.cgi?id=596268 openSUSE 11.3 M5 had problems with loading GPU firmware (see bnc#596268) so I upgraded mkinitrd (from System:Base) to mkinitrd-2.5.10-68.2.x86_64 However, selinux prevents a clean boot now with boot/93-boot.sh: line 28: [: =: unary operator expected boot/93-boot.sh: line 34: [: =: unary operator expected Machine in enforcing mode and cannot execute load_policy To disable selinux, add selinux=0 to the kernel command line. Not continuing Booting with selinux=0 is fine. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 598063] New: mkinitrd: needs quoting
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=598063 http://bugzilla.novell.com/show_bug.cgi?id=598063#c0 Summary: mkinitrd: needs quoting Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: All OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jengelh(a)medozas.de QAContact: qa(a)suse.de Found By: Beta-Customer Blocker: --- Boot script gets confused due to too liberal use of non-quoting. With the attached patch, we're a little more safe, esp. against boot params that contain ; and &, for example. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 597827] New: symlink /usr/bin/javaws to /etc/alternatives/javaws is missing
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=597827 http://bugzilla.novell.com/show_bug.cgi?id=597827#c0 Summary: symlink /usr/bin/javaws to /etc/alternatives/javaws is missing Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: Java AssignedTo: bnc-team-java(a)forge.provo.novell.com ReportedBy: paul-opensuse(a)mansfield.co.uk QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.2.3) Gecko/20100401 SUSE/3.6.3-1.5 Firefox/3.6.3 there's no symlink for /usr/bin/javaws as there is for /usr/bin/java this can be added, thus: # ln -s /etc/alternatives/javaws /usr/bin/javaws but ideally it should be there already Reproducible: Always Steps to Reproduce: 1. access a website which returns a .jnlp 2. firefox can't find the helper app 3. Actual Results: you end up running /etc/alternatives/javaws manually Expected Results: the .jnlp should kick off the java WS process -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 597667] New: splashy needs DirectFB-devel
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=597667 http://bugzilla.novell.com/show_bug.cgi?id=597667#c0 Summary: splashy needs DirectFB-devel Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 5 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: hmacht(a)novell.com ReportedBy: aj(a)novell.com QAContact: qa(a)suse.de CC: mvyskocil(a)novell.com Found By: Product Management Blocker: --- splashy calls directfb-config which is now in DirectFB-devel. I've added a Requires on the devel package so that it works but IMO that's wrong, we should not install devel packages by default. How can we solve this? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 597293] New: rsyslog using 100% cpu.
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=597293 http://bugzilla.novell.com/show_bug.cgi?id=597293#c0 Summary: rsyslog using 100% cpu. Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: mt(a)novell.com ReportedBy: mrueckert(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- using the factory package on my 11.2 server. config: [[[ > grep -vE '^(#.*|\s*)$' /etc/rsyslog.conf $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # kernel logging (may be also provided by /sbin/klogd) $IncludeConfig /var/run/rsyslog/additional-log-sockets.conf $IncludeConfig /etc/rsyslog.d/*.conf kern.warning;*.err;authpriv.none /dev/tty10;RSYSLOG_TraditionalFileFormat kern.warning;*.err;authpriv.none |/dev/xconsole;RSYSLOG_TraditionalFileFormat *.emerg * if ($syslogfacility-text == 'kern') and \ ($msg contains 'IN=' and $msg contains 'OUT=') then \ -/var/log/firewall;RSYSLOG_TraditionalFileFormat if ($syslogfacility-text == 'kern') and \ ($msg contains 'IN=' and $msg contains 'OUT=') then \ ~ if ($programname == 'acpid' or $syslogtag == '[acpid]:') and \ ($syslogseverity <= 5) then \ -/var/log/acpid;RSYSLOG_TraditionalFileFormat if ($programname == 'acpid' or $syslogtag == '[acpid]:') then \ ~ if ($programname == 'NetworkManager') or \ ($programname startswith 'nm-') then \ -/var/log/NetworkManager;RSYSLOG_TraditionalFileFormat if ($programname == 'NetworkManager') or \ ($programname startswith 'nm-') then \ ~ mail.* -/var/log/mail;RSYSLOG_TraditionalFileFormat mail.info -/var/log/mail.info;RSYSLOG_TraditionalFileFormat mail.warning -/var/log/mail.warn;RSYSLOG_TraditionalFileFormat mail.err /var/log/mail.err;RSYSLOG_TraditionalFileFormat news.crit -/var/log/news/news.crit;RSYSLOG_TraditionalFileFormat news.err -/var/log/news/news.err;RSYSLOG_TraditionalFileFormat news.notice -/var/log/news/news.notice;RSYSLOG_TraditionalFileFormat *.=warning;*.=err -/var/log/warn;RSYSLOG_TraditionalFileFormat *.crit /var/log/warn;RSYSLOG_TraditionalFileFormat *.*;mail.none;news.none -/var/log/messages;RSYSLOG_TraditionalFileFormat local0,local1.* -/var/log/localmessages;RSYSLOG_TraditionalFileFormat local2,local3.* -/var/log/localmessages;RSYSLOG_TraditionalFileFormat local4,local5.* -/var/log/localmessages;RSYSLOG_TraditionalFileFormat local6,local7.* -/var/log/localmessages;RSYSLOG_TraditionalFileFormat ]]] after running for a few minutes it starts using 100% cpu. if you strace it you see it trying to write to the /dev/xconsole FD, but it fails with EAGAIN. removing the line for the xconsole fixes it. this didnt happen with the 11.2 version of rsyslog. Marius found out it happens after about 500 message/128k data. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 16

[Bug 597162] New: Device Notifier should be on the taskbar by default
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=597162 http://bugzilla.novell.com/show_bug.cgi?id=597162#c0 Summary: Device Notifier should be on the taskbar by default Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 5 Platform: All OS/Version: openSUSE 11.3 Status: NEW Severity: Enhancement Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: malv_star(a)hotmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.2.3) Gecko/20100401 SUSE/3.6.3-1.5 Firefox/3.6.3 openSuSE 11.2 included the Device Notifier widget on the taskbar by default, but openSuSE 11.3 does not. My users have consistently indicated that they consider this method of managing plugged-in devices/volumes the best of any OS they had previously used and have seemed to actively enjoy using the widget. The single click icon in an easy-to-reach location and pleasantly-sized graphics seem to make a huge difference to their use of the system. Could this widget please be included on the taskbar by default? Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 25

[Bug 596950] New: Don't use spaces in repo names and aliases
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=596950 http://bugzilla.novell.com/show_bug.cgi?id=596950#c0 Summary: Don't use spaces in repo names and aliases Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: msvec(a)novell.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- By default the installation repo includes a space: 7 | openSUSE 11.2-0 | openSUSE 11.2-0 | No | No | cd:/// This way one always needs to use "" to work with this repo, it's unnecessary inconvenience, just use '-' like with all the other automatically added repos (openSUSE-11.2-Debug). -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 596920] New: defined(%hash) is deprecated
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=596920 http://bugzilla.novell.com/show_bug.cgi?id=596920#c0 Summary: defined(%hash) is deprecated Classification: openSUSE Product: openSUSE 11.3 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: aosthof(a)novell.com QAContact: jsrain(a)novell.com Found By: Development Blocker: --- When installing factory via vnc, one gets following message: *** Starting YaST2 *** defined(%hash) is deprecated at /usr/share/YaST2/modules/URLRecode.pm line 39 (#1) (D deprecated) defined() is not usually useful on hashes because it checks for an undefined scalar value. If you want to see if the hash is empty, just use if (%hash) { # not empty } for example. (Maybe you should just omit the defined()?) defined(%hash) is deprecated at /usr/share/YaST2/modules/URLRecode.pm line 53 (#1) (Maybe you should just omit the defined()?) defined(%hash) is deprecated at /usr/share/YaST2/modules/URLRecode.pm line 67 (#1) (Maybe you should just omit the defined()?) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 596582] New: Akonadi should only start on-demand but it starts on login with errors
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=596582 http://bugzilla.novell.com/show_bug.cgi?id=596582#c0 Summary: Akonadi should only start on-demand but it starts on login with errors Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 5 Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: martin.schlander(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux x86_64; U; da) Presto/2.2.15 Version/10.10 Logging in on a fresh installation (M5), Akonadi is started, even though no KDEPIM related apps or daemons are running. This is unfortunate for a number of reasons: - Makes startup slower - Having akonadi, mysql etc. running for apparently no reason is unnecessary overhead in general - The akonadi selftest always seems to report scary errors. Wouldn't it be possible to only start akonadi if/when it's actually needed/used? Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6