February 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 575561] New: kiwi: unable to login
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=575561 http://bugzilla.novell.com/show_bug.cgi?id=575561#c0 Summary: kiwi: unable to login Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Major Priority: P5 - None Component: System Imaging AssignedTo: ms(a)novell.com ReportedBy: vaniaz(a)msn.com QAContact: adrian(a)novell.com Found By: Other Blocker: --- It is not possible to login via kiwi from laptop hp nx 7300(network card by broadcomm). It tries to ping server before network card is initialized, so login is failed. If add into initrd delay, than everything works. Here is kiwi.log _____________ KIWI Log: + '[' -f .profile ']' + echo 'KIWI .profile contents:' KIWI .profile contents: + cat .profile kiwi_iname="initrd-netboot-suse-11.2" kiwi_type="cpio" kiwi_revision="18f802259bb6604f7dee0d38af7a6f97ee6fc5ae" kiwi_profiles="diskless,std" kiwi_boottheme="thin" kiwi_iversion="2.1.1" kiwi_size="60M" kiwi_delete="PolicyKit audit-libs blocxx bootsplash-branding-openSUSE-Education-thin bundle-lang-common-zh cpio cracklib-dict-full cracklib-dict-small cyrus-sasl db diffutils expat fillup fribidi gawk gdbm gfxboot-branding-thin glib2 glibc-locale gnome-filesystem gpg info insserv iproute2 irqbalance krb5 limal limal-bootloader limal-perl logrotate make mdadm mingetty openSUSE-release openldap2-client openslp pam pam-config pam-modules parted pciutils pcre perl perl-Bootloader perl-HTML-Tagset perl-gettext permissions pm-utils pmtools setserial suse-build-key xorg-x11-libX11 xorg-x11-libXau xorg-x11-libxcb" kiwi_drivers="drivers/md/*,drivers/ide/*,drivers/block/loop.ko,drivers/block/brd.ko,net/packet/*,fs/ext3/*,fs/ext2/*,fs/mbcache.ko,fs/exportfs/*,fs/squashfs/*,fs/nfs/*,fs/fuse/*,fs/lockd/*,net/sunrpc/*,fs/nfs_common/*,drivers/message/fusion/*,drivers/block/nbd.ko,drivers/block/aoe/aoe.ko,drivers/net/3c59x.ko,drivers/net/8139cp.ko,drivers/net/8139too.ko,drivers/net/8390.ko,drivers/net/atlx/*,drivers/net/atl1e/*,drivers/net/acenic.ko,drivers/net/b44.ko,drivers/net/bnx2.ko,drivers/net/defxx.ko,drivers/net/dl2k.ko,drivers/net/e100.ko,drivers/net/e1000/*,drivers/net/epic100.ko,drivers/net/eql.ko,drivers/net/fealnx.ko,drivers/net/forcedeth.ko,drivers/net/hp100.ko,drivers/net/mii.ko,drivers/net/myri10ge,drivers/net/natsemi.ko,drivers/net/ne2k-pci.ko,drivers/net/netconsole.ko,drivers/net/ns83820.ko,drivers/net/pcnet32.ko,drivers/net/qla3xxx.ko,drivers/net/r8169.ko,drivers/net/s2io.ko,drivers/net/sis900.ko,drivers/net/skge.ko,drivers/net/sky2.ko,drivers/net/slhc.ko,drivers/net/starfir e.ko,drivers/net/sundance.ko,drivers/net/sungem.ko,drivers/net/sungem_phy.ko,drivers/net/sunhme.ko,drivers/net/tg3.ko,drivers/net/tlan.ko,drivers/net/tulip/*,drivers/net/via-rhine.ko,drivers/net/via-velocity.ko,drivers/net/yellowfin.ko" + set -x + openKernelConsole + test 0 = 0 + Echo 'Kernel logging enabled on: /dev/tty4' + '[' 0 = 0 ']' + set +x + echo '===> Kernel logging enabled on: /dev/tty4' + '[' 0 = 0 ']' + set +x + setctsid /dev/tty4 klogconsole -l 7 -r4 + '[' no = no ']' + loaded=0 + probeNetworkCard + IFS=% + local module= + local hwicmd=/usr/sbin/hwinfo ++ /usr/sbin/hwinfo --netcard ++ grep 'Driver [IA]' ++ sed '-es(a)modprobe$.*$"@\1%@' ++ tr -d '\n' + for i in '`$hwicmd --netcard | grep "Driver [IA]" | sed -es"@modprobe$.*$\"@\1%@" | tr -d "\n"`' + echo ' Driver Info #0: Driver Activation Cmd: " ssb' + grep -q '#0' ++ echo ' Driver Info #0: Driver Activation Cmd: " ssb' ++ cut -f2 '-d"' ++ tr -d ' ' + module=ssb ++ echo ssb ++ sed -es@modprobe@@g + module=ssb + IFS=';' + for m in '$module' + echo + grep -q ssb + '[' '!' -z '' ']' + networkModule=ssb + for i in '`$hwicmd --netcard | grep "Driver [IA]" | sed -es"@modprobe$.*$\"@\1%@" | tr -d "\n"`' + echo ' Driver Info #0: Driver Activation Cmd: " b44' + grep -q '#0' ++ echo ' Driver Info #0: Driver Activation Cmd: " b44' ++ cut -f2 '-d"' ++ tr -d ' ' + module=b44 ++ echo b44 ++ sed -es@modprobe@@g + module=b44 + IFS=';' + for m in '$module' + echo ssb + grep -q b44 + '[' '!' -z ssb ']' + networkModule=ssb:b44 + IFS=' ' ++ echo ssb:b44 + networkModule=ssb:b44 + IFS=: + for i in '$networkModule' + '[' '!' -z ssb ']' + modprobe ssb + test 0 = 0 + loaded=1 + for i in '$networkModule' + '[' '!' -z b44 ']' + modprobe b44 + test 0 = 0 + loaded=1 + IFS=' ' + test 1 = 0 + runHook prenetwork + HOOK=/hooks/prenetwork.sh + '[' -e /hooks/prenetwork.sh ']' + '[' no = no ']' + setupNetwork + IFS=' ' + local MAC=0 + local DEV=0 + local mac_list=0 + local dev_list=0 + local index=0 + local hwicmd=/usr/sbin/hwinfo + local iface=eth0 ++ /usr/sbin/hwinfo --netcard + for i in '`$hwicmd --netcard`' + IFS=' ' + echo 24: PCI 1000.0: 0280 Network controller + grep -q 'HW Address:' + echo 24: PCI 1000.0: 0280 Network controller + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo '[Created' at 'pci.318]' + grep -q 'HW Address:' + echo '[Created' at 'pci.318]' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Unique ID: h0vA.cqdzXVTrWLB + grep -q 'HW Address:' + echo Unique ID: h0vA.cqdzXVTrWLB + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Parent ID: qTvu.4chw4Z9dkyF + grep -q 'HW Address:' + echo Parent ID: qTvu.4chw4Z9dkyF + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:10:00.0 + grep -q 'HW Address:' + echo SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:10:00.0 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SysFS BusID: 0000:10:00.0 + grep -q 'HW Address:' + echo SysFS BusID: 0000:10:00.0 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Hardware Class: network + grep -q 'HW Address:' + echo Hardware Class: network + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Model: '"Hewlett-Packard' Company BCM4311 802.11b/g Wireless LAN 'Controller"' + grep -q 'HW Address:' + echo Model: '"Hewlett-Packard' Company BCM4311 802.11b/g Wireless LAN 'Controller"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Vendor: pci 0x14e4 '"Broadcom"' + grep -q 'HW Address:' + echo Vendor: pci 0x14e4 '"Broadcom"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Device: pci 0x4311 '"BCM4311' 802.11b/g 'WLAN"' + grep -q 'HW Address:' + echo Device: pci 0x4311 '"BCM4311' 802.11b/g 'WLAN"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SubVendor: pci 0x103c '"Hewlett-Packard' 'Company"' + grep -q 'HW Address:' + echo SubVendor: pci 0x103c '"Hewlett-Packard' 'Company"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SubDevice: pci 0x1364 '"BCM4311' 802.11b/g Wireless LAN 'Controller"' + grep -q 'HW Address:' + echo SubDevice: pci 0x1364 '"BCM4311' 802.11b/g Wireless LAN 'Controller"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Revision: 0x01 + grep -q 'HW Address:' + echo Revision: 0x01 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver: '"b43-pci-bridge"' + grep -q 'HW Address:' + echo Driver: '"b43-pci-bridge"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Modules: '"ssb"' + grep -q 'HW Address:' + echo Driver Modules: '"ssb"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Memory Range: 0xf4000000-0xf4003fff '(rw,non-prefetchable)' + grep -q 'HW Address:' + echo Memory Range: 0xf4000000-0xf4003fff '(rw,non-prefetchable)' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo IRQ: 11 '(no' 'events)' + grep -q 'HW Address:' + echo IRQ: 11 '(no' 'events)' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Module Alias: '"pci:v000014E4d00004311sv0000103Csd00001364bc02sc80i00"' + grep -q 'HW Address:' + echo Module Alias: '"pci:v000014E4d00004311sv0000103Csd00001364bc02sc80i00"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Info '#0:' + grep -q 'HW Address:' + echo Driver Info '#0:' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Status: ssb is active + grep -q 'HW Address:' + echo Driver Status: ssb is active + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Activation Cmd: '"modprobe' 'ssb"' + grep -q 'HW Address:' + echo Driver Activation Cmd: '"modprobe' 'ssb"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Config Status: cfg=new, avail=yes, need=no, active=unknown + grep -q 'HW Address:' + echo Config Status: cfg=new, avail=yes, need=no, active=unknown + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Attached to: '#13' '(PCI' 'bridge)' + grep -q 'HW Address:' + echo Attached to: '#13' '(PCI' 'bridge)' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo 27: PCI 20e.0: 0200 Ethernet controller + grep -q 'HW Address:' + echo 27: PCI 20e.0: 0200 Ethernet controller + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo '[Created' at 'pci.318]' + grep -q 'HW Address:' + echo '[Created' at 'pci.318]' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Unique ID: rBUF.v3hQnxFJKk1 + grep -q 'HW Address:' + echo Unique ID: rBUF.v3hQnxFJKk1 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Parent ID: 6NW+.WGY8iKV5q78 + grep -q 'HW Address:' + echo Parent ID: 6NW+.WGY8iKV5q78 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:0e.0 + grep -q 'HW Address:' + echo SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:0e.0 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SysFS BusID: 0000:02:0e.0 + grep -q 'HW Address:' + echo SysFS BusID: 0000:02:0e.0 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Hardware Class: network + grep -q 'HW Address:' + echo Hardware Class: network + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Model: '"Hewlett-Packard' Company NX7300 'laptop"' + grep -q 'HW Address:' + echo Model: '"Hewlett-Packard' Company NX7300 'laptop"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Vendor: pci 0x14e4 '"Broadcom"' + grep -q 'HW Address:' + echo Vendor: pci 0x14e4 '"Broadcom"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Device: pci 0x170c '"BCM4401-B0' '100Base-TX"' + grep -q 'HW Address:' + echo Device: pci 0x170c '"BCM4401-B0' '100Base-TX"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SubVendor: pci 0x103c '"Hewlett-Packard' 'Company"' + grep -q 'HW Address:' + echo SubVendor: pci 0x103c '"Hewlett-Packard' 'Company"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo SubDevice: pci 0x30a2 '"NX7300' 'laptop"' + grep -q 'HW Address:' + echo SubDevice: pci 0x30a2 '"NX7300' 'laptop"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Revision: 0x02 + grep -q 'HW Address:' + echo Revision: 0x02 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver: '"b44"' + grep -q 'HW Address:' + echo Driver: '"b44"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Modules: '"ssb",' '"b44"' + grep -q 'HW Address:' + echo Driver Modules: '"ssb",' '"b44"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Device File: eth0 + grep -q 'HW Address:' + echo Device File: eth0 + grep -q 'Device File:' ++ echo Device File: eth0 ++ sed -e 's@Device File:@@' + DEV=' eth0' ++ echo eth0 + DEV=eth0 + dev_list[$index]=eth0 + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Memory Range: 0xf4108000-0xf4109fff '(rw,non-prefetchable)' + grep -q 'HW Address:' + echo Memory Range: 0xf4108000-0xf4109fff '(rw,non-prefetchable)' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo IRQ: 10 '(no' 'events)' + grep -q 'HW Address:' + echo IRQ: 10 '(no' 'events)' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo HW Address: 00:17:a4:e1:00:55 + grep -q 'HW Address:' ++ echo HW Address: 00:17:a4:e1:00:55 ++ sed -e 's@HW Address:@@' + MAC=' 00:17:a4:e1:00:55' ++ echo 00:17:a4:e1:00:55 + MAC=00:17:a4:e1:00:55 + mac_list[$index]=00:17:a4:e1:00:55 ++ expr 0 + 1 + index=1 + echo HW Address: 00:17:a4:e1:00:55 + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Link detected: no + grep -q 'HW Address:' + echo Link detected: no + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Module Alias: '"pci:v000014E4d0000170Csv0000103Csd000030A2bc02sc00i00"' + grep -q 'HW Address:' + echo Module Alias: '"pci:v000014E4d0000170Csv0000103Csd000030A2bc02sc00i00"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Info '#0:' + grep -q 'HW Address:' + echo Driver Info '#0:' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Status: b44 is active + grep -q 'HW Address:' + echo Driver Status: b44 is active + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Driver Activation Cmd: '"modprobe' 'b44"' + grep -q 'HW Address:' + echo Driver Activation Cmd: '"modprobe' 'b44"' + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Config Status: cfg=new, avail=yes, need=no, active=unknown + grep -q 'HW Address:' + echo Config Status: cfg=new, avail=yes, need=no, active=unknown + grep -q 'Device File:' + for i in '`$hwicmd --netcard`' + IFS=' ' + echo Attached to: '#20' '(PCI' 'bridge)' + grep -q 'HW Address:' + echo Attached to: '#20' '(PCI' 'bridge)' + grep -q 'Device File:' + '[' -z 01-00-17-a4-e1-00-55 ']' + index=0 ++ echo 01-00-17-a4-e1-00-55 ++ cut -f2- -d - ++ tr - : + BOOTIF=00:17:a4:e1:00:55 + for i in '${mac_list[*]}' + '[' 00:17:a4:e1:00:55 = 00:17:a4:e1:00:55 ']' + iface=eth0 ++ expr 0 + 1 + index=1 + export PXE_IFACE=eth0 + PXE_IFACE=eth0 + dhcpcd -p eth0 err, eth0: timed out err, eth0: lease information file `/var/lib/dhcpcd/dhcpcd-eth0.info' does not exist warn, eth0: using IPV4LL address 169.254.52.46 err, eth0: Failed to lookup hostname via DNS: Name or service not known + test 0 '!=' 0 + ifconfig lo 127.0.0.1 netmask 255.0.0.0 up + for i in 1 2 3 4 5 6 7 8 9 0 + '[' -s /var/lib/dhcpcd/dhcpcd-eth0.info ']' + break + importFile + IFS=' ' + read line + echo 'IPADDR='\''169.254.52.46'\''' + grep -qi '^#' ++ echo 'IPADDR='\''169.254.52.46'\''' ++ cut -d = -f1 + key=IPADDR ++ echo 'IPADDR='\''169.254.52.46'\''' ++ cut -d = -f2- + item=''\''169.254.52.46'\''' + '[' -z IPADDR ']' + '[' -z ''\''169.254.52.46'\''' ']' + echo ''\''169.254.52.46'\''' + grep -E -q '^("|'\'')' + Debug 'IPADDR='\''169.254.52.46'\''' + test 0 = 1 + eval export 'IPADDR\='\''169.254.52.46'\''' ++ export IPADDR=169.254.52.46 ++ IPADDR=169.254.52.46 + read line + echo 'NETMASK='\''255.255.0.0'\''' + grep -qi '^#' ++ echo 'NETMASK='\''255.255.0.0'\''' ++ cut -d = -f1 + key=NETMASK ++ echo 'NETMASK='\''255.255.0.0'\''' ++ cut -d = -f2- + item=''\''255.255.0.0'\''' + '[' -z NETMASK ']' + '[' -z ''\''255.255.0.0'\''' ']' + echo ''\''255.255.0.0'\''' + grep -E -q '^("|'\'')' + Debug 'NETMASK='\''255.255.0.0'\''' + test 0 = 1 + eval export 'NETMASK\='\''255.255.0.0'\''' ++ export NETMASK=255.255.0.0 ++ NETMASK=255.255.0.0 + read line + echo 'NETWORK='\''169.254.0.0'\''' + grep -qi '^#' ++ echo 'NETWORK='\''169.254.0.0'\''' ++ cut -d = -f1 + key=NETWORK ++ echo 'NETWORK='\''169.254.0.0'\''' ++ cut -d = -f2- + item=''\''169.254.0.0'\''' + '[' -z NETWORK ']' + '[' -z ''\''169.254.0.0'\''' ']' + echo ''\''169.254.0.0'\''' + grep -E -q '^("|'\'')' + Debug 'NETWORK='\''169.254.0.0'\''' + test 0 = 1 + eval export 'NETWORK\='\''169.254.0.0'\''' ++ export NETWORK=169.254.0.0 ++ NETWORK=169.254.0.0 + read line + echo 'BROADCAST='\''169.254.255.255'\''' + grep -qi '^#' ++ echo 'BROADCAST='\''169.254.255.255'\''' ++ cut -d = -f1 + key=BROADCAST ++ echo 'BROADCAST='\''169.254.255.255'\''' ++ cut -d = -f2- + item=''\''169.254.255.255'\''' + '[' -z BROADCAST ']' + '[' -z ''\''169.254.255.255'\''' ']' + echo ''\''169.254.255.255'\''' + grep -E -q '^("|'\'')' + Debug 'BROADCAST='\''169.254.255.255'\''' + test 0 = 1 + eval export 'BROADCAST\='\''169.254.255.255'\''' ++ export BROADCAST=169.254.255.255 ++ BROADCAST=169.254.255.255 + read line + echo 'LEASEDFROM='\''0'\''' + grep -qi '^#' ++ echo 'LEASEDFROM='\''0'\''' ++ cut -d = -f1 + key=LEASEDFROM ++ echo 'LEASEDFROM='\''0'\''' ++ cut -d = -f2- + item=''\''0'\''' + '[' -z LEASEDFROM ']' + '[' -z ''\''0'\''' ']' + echo ''\''0'\''' + grep -E -q '^("|'\'')' + Debug 'LEASEDFROM='\''0'\''' + test 0 = 1 + eval export 'LEASEDFROM\='\''0'\''' ++ export LEASEDFROM=0 ++ LEASEDFROM=0 + read line + echo 'LEASETIME='\''20'\''' + grep -qi '^#' ++ echo 'LEASETIME='\''20'\''' ++ cut -d = -f1 + key=LEASETIME ++ echo 'LEASETIME='\''20'\''' ++ cut -d = -f2- + item=''\''20'\''' + '[' -z LEASETIME ']' + '[' -z ''\''20'\''' ']' + echo ''\''20'\''' + grep -E -q '^("|'\'')' + Debug 'LEASETIME='\''20'\''' + test 0 = 1 + eval export 'LEASETIME\='\''20'\''' ++ export LEASETIME=20 ++ LEASETIME=20 + read line + echo 'RENEWALTIME='\''10'\''' + grep -qi '^#' ++ echo 'RENEWALTIME='\''10'\''' ++ cut -d = -f1 + key=RENEWALTIME ++ echo 'RENEWALTIME='\''10'\''' ++ cut -d = -f2- + item=''\''10'\''' + '[' -z RENEWALTIME ']' + '[' -z ''\''10'\''' ']' + echo ''\''10'\''' + grep -E -q '^("|'\'')' + Debug 'RENEWALTIME='\''10'\''' + test 0 = 1 + eval export 'RENEWALTIME\='\''10'\''' ++ export RENEWALTIME=10 ++ RENEWALTIME=10 + read line + echo 'REBINDTIME='\''17'\''' + grep -qi '^#' ++ echo 'REBINDTIME='\''17'\''' ++ cut -d = -f1 + key=REBINDTIME ++ echo 'REBINDTIME='\''17'\''' ++ cut -d = -f2- + item=''\''17'\''' + '[' -z REBINDTIME ']' + '[' -z ''\''17'\''' ']' + echo ''\''17'\''' + grep -E -q '^("|'\'')' + Debug 'REBINDTIME='\''17'\''' + test 0 = 1 + eval export 'REBINDTIME\='\''17'\''' ++ export REBINDTIME=17 ++ REBINDTIME=17 + read line + echo 'INTERFACE='\''eth0'\''' + grep -qi '^#' ++ echo 'INTERFACE='\''eth0'\''' ++ cut -d = -f1 + key=INTERFACE ++ echo 'INTERFACE='\''eth0'\''' ++ cut -d = -f2- + item=''\''eth0'\''' + '[' -z INTERFACE ']' + '[' -z ''\''eth0'\''' ']' + echo ''\''eth0'\''' + grep -E -q '^("|'\'')' + Debug 'INTERFACE='\''eth0'\''' + test 0 = 1 + eval export 'INTERFACE\='\''eth0'\''' ++ export INTERFACE=eth0 ++ INTERFACE=eth0 + read line + echo 'CLASSID='\''dhcpcd 3.2.3'\''' + grep -qi '^#' ++ echo 'CLASSID='\''dhcpcd 3.2.3'\''' ++ cut -d = -f1 + key=CLASSID ++ echo 'CLASSID='\''dhcpcd 3.2.3'\''' ++ cut -d = -f2- + item=''\''dhcpcd 3.2.3'\''' + '[' -z CLASSID ']' + '[' -z ''\''dhcpcd 3.2.3'\''' ']' + echo ''\''dhcpcd 3.2.3'\''' + grep -E -q '^("|'\'')' + Debug 'CLASSID='\''dhcpcd 3.2.3'\''' + test 0 = 1 + eval export 'CLASSID\='\''dhcpcd 3.2.3'\''' ++ export 'CLASSID=dhcpcd 3.2.3' ++ CLASSID='dhcpcd 3.2.3' + read line + echo 'CLIENTID='\''01:00:17:a4:e1:00:55'\''' + grep -qi '^#' ++ echo 'CLIENTID='\''01:00:17:a4:e1:00:55'\''' ++ cut -d = -f1 + key=CLIENTID ++ echo 'CLIENTID='\''01:00:17:a4:e1:00:55'\''' ++ cut -d = -f2- + item=''\''01:00:17:a4:e1:00:55'\''' + '[' -z CLIENTID ']' + '[' -z ''\''01:00:17:a4:e1:00:55'\''' ']' + echo ''\''01:00:17:a4:e1:00:55'\''' + grep -E -q '^("|'\'')' + Debug 'CLIENTID='\''01:00:17:a4:e1:00:55'\''' + test 0 = 1 + eval export 'CLIENTID\='\''01:00:17:a4:e1:00:55'\''' ++ export CLIENTID=01:00:17:a4:e1:00:55 ++ CLIENTID=01:00:17:a4:e1:00:55 + read line + echo 'DHCPCHADDR='\''00:17:a4:e1:00:55'\''' + grep -qi '^#' ++ echo 'DHCPCHADDR='\''00:17:a4:e1:00:55'\''' ++ cut -d = -f1 + key=DHCPCHADDR ++ echo 'DHCPCHADDR='\''00:17:a4:e1:00:55'\''' ++ cut -d = -f2- + item=''\''00:17:a4:e1:00:55'\''' + '[' -z DHCPCHADDR ']' + '[' -z ''\''00:17:a4:e1:00:55'\''' ']' + echo ''\''00:17:a4:e1:00:55'\''' + grep -E -q '^("|'\'')' + Debug 'DHCPCHADDR='\''00:17:a4:e1:00:55'\''' + test 0 = 1 + eval export 'DHCPCHADDR\='\''00:17:a4:e1:00:55'\''' ++ export DHCPCHADDR=00:17:a4:e1:00:55 ++ DHCPCHADDR=00:17:a4:e1:00:55 + read line + '[' '!' -z '' ']' + IFS=' ' + '[' -z '' ']' + '[' -n '' ']' + echo 'search ' + '[' -z '' ']' + '[' -n '' ']' + IFS=, ++ echo 00:17:a4:e1:00:55 ++ tr a-z A-Z + DHCPCHADDR=00:17:A4:E1:00:55 + runHook postnetwork + HOOK=/hooks/postnetwork.sh + '[' -e /hooks/postnetwork.sh ']' + '[' no = no ']' + checkServer + '[' '!' -z 10.0.0.254 ']' + Echo 'Found server in kernel cmdline' + '[' 0 = 0 ']' + set +x + echo '===> Found server in kernel cmdline' + '[' 0 = 0 ']' + set +x + SERVER=10.0.0.254 + '[' '!' -z tftp ']' + Echo 'Found server type in kernel cmdline' + '[' 0 = 0 ']' + set +x + echo '===> Found server type in kernel cmdline' + '[' 0 = 0 ']' + set +x + SERVERTYPE=tftp + '[' -z 10.0.0.254 ']' + Echo 'Checking Server name: 10.0.0.254' + '[' 0 = 0 ']' + set +x + echo '===> Checking Server name: 10.0.0.254' + '[' 0 = 0 ']' + set +x + ping -c 1 10.0.0.254 + Echo 'Server: 10.0.0.254 not found' + '[' 0 = 0 ']' + set +x + echo '===> Server: 10.0.0.254 not found' + '[' 0 = 0 ']' + set +x + '[' -z tftp ']' + '[' tftp = tftp ']' + '[' '!' -z '' ']' + '[' '!' -z '' ']' + systemException 'Can'\''t assign SERVER IP/name... fatal !' reboot + set +x + echo '===> Can'\''t assign SERVER IP/name... fatal !' + '[' 0 = 0 ']' + set +x + case "$what" in + Echo 'shellException: providing shell...' + '[' 0 = 0 ']' + set +x + echo '===> shellException: providing shell...' + '[' 0 = 0 ']' + set +x + setctsid /dev/tty1 /bin/bash -i -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 575615] New: BUG: scheduling while atomic: swapper/0/0x10000002
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=575615 http://bugzilla.novell.com/show_bug.cgi?id=575615#c0 Summary: BUG: scheduling while atomic: swapper/0/0x10000002 Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: emoenke(a)gwdg.de QAContact: qa(a)suse.de Found By: Community User Blocker: --- Kernel 2.6.31.8-0.1-desktop is booting with these errors: <3>[ 0.024285] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.024377] Modules linked in: <4>[ 0.024507] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.024592] Call Trace: <4>[ 0.024695] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.024786] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.024874] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.024962] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.025007] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.025096] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.025185] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.025275] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.025362] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.025451] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.025540] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 4d0 <4>[ 0.025718] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.025807] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.025895] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.026002] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.026093] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.026180] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.026268] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.026356] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.026444] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.026532] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.026621] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.026710] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.033127] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.033220] Modules linked in: <4>[ 0.033349] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.033435] Call Trace: <4>[ 0.033533] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.033621] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.033709] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.033797] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.033885] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.033975] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.034013] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.034103] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.034190] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.034278] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.034367] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.034456] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.034544] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.034633] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.034721] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.034808] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.034898] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.035002] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.035090] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.035178] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.035266] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.035353] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.035441] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.035530] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.042238] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.042332] Modules linked in: <4>[ 0.042461] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.042546] Call Trace: <4>[ 0.042645] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.042733] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.042821] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.042910] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.043007] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.043097] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.043185] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.043274] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.043361] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.043450] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.043539] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.043627] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.043716] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.043805] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.043893] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.043999] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.044090] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.044177] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.044264] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.044353] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.044999] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.045087] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.045176] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.045265] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.051021] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.051116] Modules linked in: <4>[ 0.051245] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.051333] Call Trace: <4>[ 0.051432] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.051522] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.051611] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.051701] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.051791] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.051882] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.051972] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.052005] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.052093] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.052181] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.052270] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.052359] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.052447] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.052536] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.052624] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.052711] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.052801] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.052888] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.052999] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.053087] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.053175] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.053263] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.053351] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.053439] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.060306] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.060397] Modules linked in: <4>[ 0.060526] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.060610] Call Trace: <4>[ 0.060705] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.060794] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.060881] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.060969] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.061006] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.061096] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.061184] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.061273] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.061361] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.061449] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.061538] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.061626] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.061715] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.061804] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.061891] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.061997] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.062087] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.062174] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.062262] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.062350] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.062438] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.062526] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.062613] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.062702] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.079312] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.079405] Modules linked in: <4>[ 0.079533] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.079619] Call Trace: <4>[ 0.079717] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.079807] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.079894] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.079997] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.080086] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.080175] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.080263] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.080352] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.080439] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.080527] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.080616] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.080704] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.080793] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.080882] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.080970] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.080994] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.081084] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.081171] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.081259] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.081347] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.081434] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.081522] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.081610] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.081698] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.088197] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.088289] Modules linked in: <4>[ 0.088418] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.088503] Call Trace: <4>[ 0.088600] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.088689] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.088777] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.088865] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.088955] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.089004] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.089092] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.089182] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.089270] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.089358] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.089447] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.089536] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.089624] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.089714] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.089802] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.089889] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.089996] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.090083] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.090171] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.090259] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.090347] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.090435] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.090523] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.090612] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.097115] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.097208] Modules linked in: <4>[ 0.097336] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.097421] Call Trace: <4>[ 0.097519] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.097608] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.097695] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.097783] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.097872] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.097961] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.097996] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.098086] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.098173] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.098262] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.098351] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.098439] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.098528] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.098617] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.098705] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.098792] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.098882] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.098992] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.099080] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.099168] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.099256] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.099344] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.099432] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.099520] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.106325] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.106416] Modules linked in: <4>[ 0.106545] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.106630] Call Trace: <4>[ 0.106725] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.106814] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.106901] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.106997] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.107086] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.107175] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.107263] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.107352] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.107439] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.107527] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.107616] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.107705] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.107793] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.107883] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.107990] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.108077] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.108167] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.108255] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.108343] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.108431] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.108519] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.108606] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.108695] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.108784] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.115013] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.115105] Modules linked in: <4>[ 0.115233] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.115318] Call Trace: <4>[ 0.115414] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.115502] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.115590] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.115678] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.115994] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.116083] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.116171] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.116260] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.116348] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.116990] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.117078] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.117167] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.117255] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.117344] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.117432] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.117519] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.117609] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.117696] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.117784] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.117872] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.117986] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.118075] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.118163] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.118251] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.124265] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.124356] Modules linked in: <4>[ 0.124484] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.124569] Call Trace: <4>[ 0.124663] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.124752] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.124839] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.124927] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.124993] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.125083] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.125171] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.125260] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.125349] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.125437] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.125527] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.125616] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.125705] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.125794] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.125882] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.125987] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.126077] [<ffffffff819d5034>] do_copy+0x3e/0xd7 <4>[ 0.126164] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.126253] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.126341] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.126429] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.126517] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.126605] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.126693] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.134197] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.134291] Modules linked in: <4>[ 0.134421] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.134506] Call Trace: <4>[ 0.134605] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.134694] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.134781] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.134869] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.134958] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.134990] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.135079] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.135168] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.135257] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.135345] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.135435] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.135524] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.135613] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.135702] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.135791] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.135878] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.135989] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.136076] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.136164] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.136253] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.136341] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.136429] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.136517] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.136606] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.143003] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.143096] Modules linked in: <4>[ 0.143225] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.143311] Call Trace: <4>[ 0.143410] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.143499] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.143587] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.143674] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.143765] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.143854] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.143943] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.144003] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.144091] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.144179] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.144268] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.144356] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.144445] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.144534] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.144622] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.144708] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.144799] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.144886] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.144985] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.145073] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.145160] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.145247] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.145336] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.145426] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.152147] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.152239] Modules linked in: <4>[ 0.152368] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.152453] Call Trace: <4>[ 0.152551] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.152640] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.152727] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.152815] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.152904] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.152998] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.153086] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.153175] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.153263] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.153351] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.153440] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.153529] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.153618] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.153707] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.153795] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.153882] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.153986] [<ffffffff819d5034>] do_copy+0x3e/0xd7 <4>[ 0.154074] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.154162] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.154251] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.154338] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.154426] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.154514] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.154603] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.161289] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.161381] Modules linked in: <4>[ 0.161510] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.161595] Call Trace: <4>[ 0.161693] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.161781] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.161869] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.161957] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.162001] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.162091] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.162179] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.162268] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.162356] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.162444] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.162532] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.162621] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.162710] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.162799] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.162887] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0<4>[ 0.163247] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.163336] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.163423] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.163511] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.163599] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.163688] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.170138] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.170231] Modules linked in: <4>[ 0.170360] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.170445] Call Trace: <4>[ 0.170544] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.170633] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.170721] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.170808] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.170898] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.170987] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.171075] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.171165] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.171252] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.171341] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.171429] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.171518] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.171607] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.171696] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.171784] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.171871] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.171983] [<ffffffff819d5034>] do_copy+0x3e/0xd7 <4>[ 0.172071] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.172159] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.172981] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.173069] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.173157] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.173245] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.173334] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.179242] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.179335] Modules linked in: <4>[ 0.179463] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.179548] Call Trace: <4>[ 0.179645] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.179733] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.179821] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.179909] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.180007] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.180096] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.180184] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.180273] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.180361] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.180449] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.180538] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.180626] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.180715] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.180804] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.180893] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.180982] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.181072] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.181159] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.181246] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.181335] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.181422] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.181509] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.181597] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.181686] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.188131] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.188223] Modules linked in: <4>[ 0.188351] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.188436] Call Trace: <4>[ 0.188533] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.188621] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.188708] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.188796] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.188885] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.188988] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.189076] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.189165] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.189253] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.189342] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.189430] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.189519] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.189608] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.189697] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.189785] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.189872] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.189978] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.190066] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.190154] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.190242] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.190331] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.190419] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.190507] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.190595] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e <3>[ 0.197290] BUG: scheduling while atomic: swapper/0/0x10000002 <4>[ 0.197384] Modules linked in: <4>[ 0.197513] Pid: 0, comm: swapper Not tainted 2.6.31.8-0.1-desktop #1 <4>[ 0.197598] Call Trace: <4>[ 0.197696] [<ffffffff81011a19>] try_stack_unwind+0x189/0x1b0 <4>[ 0.197785] [<ffffffff8101025d>] dump_trace+0xad/0x3a0 <4>[ 0.197872] [<ffffffff81011524>] show_trace_log_lvl+0x64/0x90 <4>[ 0.197960] [<ffffffff81011573>] show_trace+0x23/0x40 <4>[ 0.197981] [<ffffffff815524d2>] dump_stack+0x81/0x9e <4>[ 0.198070] [<ffffffff81056ef2>] __schedule_bug+0x92/0xa0 <4>[ 0.198158] [<ffffffff8155340f>] thread_return+0x2a7/0x3c8 <4>[ 0.198248] [<ffffffff81060d88>] __cond_resched+0x38/0x80 <4>[ 0.198336] [<ffffffff815536cd>] _cond_resched+0x4d/0x60 <4>[ 0.198424] [<ffffffff81100dfa>] generic_perform_write+0x15a/0x220 <4>[ 0.198512] [<ffffffff81100f50>] generic_file_buffered_write+0x90/0x160 <4>[ 0.198601] [<ffffffff8110170f>] __generic_file_aio_write_nolock+0x28f/0x4d0 <4>[ 0.198690] [<ffffffff81101aaf>] generic_file_aio_write+0x7f/0x110 <4>[ 0.198780] [<ffffffff8114bb12>] do_sync_write+0x102/0x160 <4>[ 0.198868] [<ffffffff8114be98>] vfs_write+0xd8/0x1c0 <4>[ 0.198976] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.199067] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.199154] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 <4>[ 0.199242] [<ffffffff81a01140>] gunzip+0x425/0x500 <4>[ 0.199331] [<ffffffff819d4ed1>] unpack_to_rootfs+0x2f6/0x41b <4>[ 0.199418] [<ffffffff819d59e3>] populate_rootfs+0x72/0x13a <4>[ 0.199507] [<ffffffff819d3639>] start_kernel+0x3bf/0x3e6 <4>[ 0.199595] [<ffffffff819d268d>] x86_64_start_reservations+0x134/0x14f <4>[ 0.199684] [<ffffffff819d2803>] x86_64_start_kernel+0x15b/0x17e but then booting continues normally. <4>[ 0.162981] [<ffffffff8114c82b>] sys_write+0x5b/0xa0 <4>[ 0.163072] [<ffffffff819d508d>] do_copy+0x97/0xd7 <4>[ 0.163159] [<ffffffff819d49c9>] flush_buffer+0x8c/0xc8 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 571973] New: YaST2 Security and Users/User and Group Management uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571973 http://bugzilla.novell.com/show_bug.cgi?id=571973#c0 Summary: YaST2 Security and Users/User and Group Management uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Cancel/OK, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 571971] New: YaST2 Security and Users/Local Security uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571971 http://bugzilla.novell.com/show_bug.cgi?id=571971#c0 Summary: YaST2 Security and Users/Local Security uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Cancel/OK, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 571967] New: YaST2 Network Services/Windows Domain Membership uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571967 http://bugzilla.novell.com/show_bug.cgi?id=571967#c0 Summary: YaST2 Network Services/Windows Domain Membership uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Cancel/OK, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 571960] New: YaST2 Network Services/NIS Client uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571960 http://bugzilla.novell.com/show_bug.cgi?id=571960#c0 Summary: YaST2 Network Services/NIS Client uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Abort/Finish, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 571957] New: YaST2 Network Services/LDAP Client uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571957 http://bugzilla.novell.com/show_bug.cgi?id=571957#c0 Summary: YaST2 Network Services/LDAP Client uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Cancel/OK, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 571955] New: YaST2 Network Services/Kerberos Client uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571955 http://bugzilla.novell.com/show_bug.cgi?id=571955#c0 Summary: YaST2 Network Services/Kerberos Client uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Cancel/OK, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 571943] New: YaST2 System/Language uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571943 http://bugzilla.novell.com/show_bug.cgi?id=571943#c0 Summary: YaST2 System/Language uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Cancel/OK, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 571945] New: YaST2 System/Profile Manager uses Gnome button order in KDE
by bugzilla_noreply＠novell.com 01 Feb '10

01 Feb '10

http://bugzilla.novell.com/show_bug.cgi?id=571945 http://bugzilla.novell.com/show_bug.cgi?id=571945#c0 Summary: YaST2 System/Profile Manager uses Gnome button order in KDE Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Minor Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bbregister(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; NET CLR 1.1.4322; MS-RTC LM 8; MS-RTC EA 2) Specifically, this applet uses Cancel/OK, and therefore looks out of place on a KDE desktop. There may also be other places where this applet uses the wrong button order, and it may be worth reviewing every dialog for both button order and placement. Please refer to the wiki about how to handle Gnome/KDE button order differences using the ButtonBox widget: http://en.opensuse.org/YaST/Development/Misc/Button_Order Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2