November 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 643434] New: gdb hangs when printing a class member
by bugzilla_noreply＠novell.com 02 Nov '10

02 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=643434 https://bugzilla.novell.com/show_bug.cgi?id=643434#c0 Summary: gdb hangs when printing a class member Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Development AssignedTo: pth(a)novell.com ReportedBy: florian(a)d-labs.de QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.1.11) Gecko/20100714 SUSE/3.5.11-0.1.1 Firefox/3.5.11 I'm hitting this bug: https://bugzilla.redhat.com/show_bug.cgi?id=541093 gdb --version GNU gdb (GDB) SUSE (6.8.91.20090930-2.4) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-suse-linux". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Reproducible: Always Steps to Reproduce: see bug referenced above Actual Results: gdb hangs ... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 646875] New: Can incorrectly think that dhcpd is already running with pidfile existing but commandline not existing
by bugzilla_noreply＠novell.com 02 Nov '10

02 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=646875 https://bugzilla.novell.com/show_bug.cgi?id=646875#c0 Summary: Can incorrectly think that dhcpd is already running with pidfile existing but commandline not existing Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Minor Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: frank(a)bushlife.com.au QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-GB; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10 When issuing the command "service dhcpd restart" an error can occur if the pid file is in existence but the /proc/<pid>/cmdline file is not present. In this situation the /etc/init.d/dhcpd script outputs an error message indicating that grep on line 226 can not find the specified file. The existing line of if test -n "$p" && grep -qE "^${DAEMON_BIN}" "/proc/$p/cmdline" ; then should be changed to if test -n "$p" -a -e /proc/$p/cmdline && grep -qE "^${DAEMON_BIN}" "/proc/$p/cmdline" ; then The error output is: netman:/usr/lib/nagios/plugins # service dhcpd restart Shutting down ISC DHCPv4 4.x Server done Starting ISC DHCPv4 4.x Server grep: /proc/29662/cmdline: No such file or directory [chroot] done Making the change removes the misleading error message. Reproducible: Always Steps to Reproduce: 1.service dhcpd restart 2. 3. Actual Results: netman:/usr/lib/nagios/plugins # service dhcpd restart Shutting down ISC DHCPv4 4.x Server done Starting ISC DHCPv4 4.x Server grep: /proc/29662/cmdline: No such file or directory [chroot] done Expected Results: netman:/usr/lib/nagios/plugins # service dhcpd restart Shutting down ISC DHCPv4 4.x Server done Starting ISC DHCPv4 4.x Server [chroot] done -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 650267] New: Evolution 2.30 / 2.32 will not connect to Microsoft Exchange 2003 Global Address List
by bugzilla_noreply＠novell.com 02 Nov '10

02 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=650267 https://bugzilla.novell.com/show_bug.cgi?id=650267#c0 Summary: Evolution 2.30 / 2.32 will not connect to Microsoft Exchange 2003 Global Address List Classification: openSUSE Product: openSUSE 11.4 Version: Milestone 2 of 6 Platform: i586 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Evolution AssignedTo: bnc-team-evolution(a)forge.provo.novell.com ReportedBy: kmgramm(a)code3pse.com QAContact: lakhil(a)novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.11) Gecko/20101013 SUSE/3.6.11-33.1 Firefox/3.6.11 Neither 11.3 or the latest 11.4 milestone 2 will successfully query a Microsoft Exchange 2003 Global Address List. Both will connect to the server and display email messages and/or entries in the Exchange Contacts. But when you try to look up addresses in the GAL, you get this error: Unable to open address book This address book cannot be opened. This either means that an incorrect URI was entered, or the server is unreachable. Detailed error message: Other error Reproducible: Always Steps to Reproduce: 1. Fresh install of either 11.3 or 11.4 milestone 2 2. Add evolution-exchange package 3. Open Evolution and configure a new Exchange account 4. Try to view the GAL Actual Results: You get the error message: Unable to open address book This address book cannot be opened. This either means that an incorrect URI was entered, or the server is unreachable. Detailed error message: Other error Expected Results: Display the entries in the GAL. I've only tried the x86 versions of both distributions. Both Fedora 13 and Ubuntu 10.10 (which are running Gnome 2.30.3) can successfully connect to the GAL. I'm marking this issue as Major, because my office uses Exchange for mail and this issues effectively makes 11.3 & 11.4 unusable to me. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 244838] KMPManual Code 10 / wrong reference to BuildRequires: kernel
by bugzilla_noreply＠novell.com 02 Nov '10

02 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=244838 https://bugzilla.novell.com/show_bug.cgi?id=244838#c10 Karl Eichwalder <ke(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WONTFIX --- Comment #10 from Karl Eichwalder <ke(a)novell.com> 2010-11-02 09:12:11 UTC --- Please reopen if the bug still exists in 11.3. BTW, the documentation team does not work in that domain--I do not knwo who would like to work on such a bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 648726] New: X session crash when launching emacs
by bugzilla_noreply＠novell.com 02 Nov '10

02 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=648726 https://bugzilla.novell.com/show_bug.cgi?id=648726#c0 Summary: X session crash when launching emacs Classification: openSUSE Product: openSUSE 11.4 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs(a)forge.provo.novell.com ReportedBy: bphilips(a)novell.com QAContact: xorg-maintainer-bugs(a)forge.provo.novell.com Found By: Beta-Customer Blocker: --- Created an attachment (id=396617) --> (http://bugzilla.novell.com/attachment.cgi?id=396617) supportconfig Steps to reproduce 1) Launch a regular GNOME session (desktop effects disabled) 2) Launch emacs 3) X crashes, gdm restarts -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 21

[Bug 649954] New: /usr/lib/pm-utils/power.d/laptop-mode-tools has a major typo in it; breaks functionality
by bugzilla_noreply＠novell.com 02 Nov '10

02 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=649954 https://bugzilla.novell.com/show_bug.cgi?id=649954#c0 Summary: /usr/lib/pm-utils/power.d/laptop-mode-tools has a major typo in it; breaks functionality Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: i586 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: windows2linux(a)zoho.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.12) Gecko/20101026 SUSE/3.6.12-1.1 Firefox/3.6.12 Laptop-mode-tools does not automatically toggle when a user plugs or unplugs the AC power cord from a laptop. This is because there is a typo in the included script located at: /usr/lib/pm-utils/power.d/laptop-mode-tools The follow two lines should be changed: laptop_mode start laptop_mode stop Instead of using "start" and "stop" laptop_mode now uses "auto" instead. Thus, both lines should read: laptop_mode auto This has fixed the issue for me. Reproducible: Always Steps to Reproduce: 1. Enable the laptop-mode service 2. Plug and unplug the laptop's AC power card Actual Results: Laptop-mode does not automatically enable or disable Expected Results: Laptop-mode should automatically toggle based on whether or not the AC power cord is plugged in. Applying the above changes to the file has fixed this issue for the time being. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 255732] GNOME-Main-Menu: Add to Favorites Behavior Inconsistent
by bugzilla_noreply＠novell.com 02 Nov '10

02 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=255732 https://bugzilla.novell.com/show_bug.cgi?id=255732#c5 David Liang <dliang(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |dliang(a)novell.com --- Comment #5 from David Liang <dliang(a)novell.com> 2010-11-02 05:50:28 UTC --- fixed in 11.3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 650593] New: [LSI CR183682] No response messages from DM path down with VDs on no preferred path
by bugzilla_noreply＠novell.com 01 Nov '10

01 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=650593 https://bugzilla.novell.com/show_bug.cgi?id=650593#c0 Summary: [LSI CR183682] No response messages from DM path down with VDs on no preferred path Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: SLES 11 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: chris.chavez(a)lsi.com QAContact: qa(a)suse.de Found By: --- Blocker: --- Created an attachment (id=398049) --> (http://bugzilla.novell.com/attachment.cgi?id=398049) serial console logs and syslog User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.7 (KHTML, like Gecko) Chrome/7.0.517.41 Safari/534.7 There appears to be an issue at the transport layer or the lower driver layer that's sending the DID_TRANSPORT_FAILFAST forever which is causing DMMP to hang. below is the analysis from the DMMP failover team: Configuration on which I could easily able to reproduce this issue: SLES11SP1 2.6.32.12-0.7-default Broadcom 57710 NIC with inbox driver bnx2x: 1.52.1-7 inbox open-iscsi: 2.0.871-0.20.3 inbox scsi_dh_rdac (with debug enabled): 1.5.2.0-1 IOMonkey tool 50 LUNS for IO Two Paths per controller (4 iSCSI sessions from host to SAN array) Dell MD36xxi controller In the above config, I could notice multipathd getting freezed during failover and failback. Reason for multipathd freeze is due to IO hang in physical paths. Below snippet would give better understanding of the issue. I think this analysis should be good enough to understand that this is not a device mapper issue. Further investigation should be done on iscsi driver for IO hang . Hope this helps Findings and logs analysis: [controller serial logs and syslog is attached] * At start of the test, DM device had 2 paths per controller and each paths are in active state. IO was started on all the 50 LUNs #multipath -ll 36842b2b0001681f0000072293b28b78c mpathax (36842b2b0001681f0000072293b28b78c) dm-47 DELL,MD36xxi size=4.0G features='3 queue_if_no_path pg_init_retries 50' hwhandler='1 rdac' wp=rw |-+- policy='round-robin 0' prio=6 status=active | |- 4:0:0:48 sdbw 68:160 active ready running | `- 6:0:0:48 sdgq 132:96 active ready running `-+- policy='round-robin 0' prio=1 status=enabled |- 5:0:0:48 sdcu 70:32 active ghost running `- 7:0:0:48 sdgh 131:208 active ghost running * When controller A was made offline, as expected paths from controller A was marked as failed by DM multipath. For failed paths, sg_inq command returned DID_TRANSPORT_FASTFAIL for ever. I was expecting DID_NO_CONNECT after session recovery timeout. --> controller A offlined -> cmgrSetAltToFailed 1 10/30/10-05:41:23 (tShell1): NOTE: vdm::syncRequired(): Begin 10/30/10-05:41:57 (tShell1): NOTE: vdm::syncRequired(): Complete, elapsed time = 34 seconds 10/30/10-05:41:57 (tShell1): NOTE: CCM: takeover() setting MOS 10/30/10-05:41:57 (tShell1): WARN: Alt Ctl Reboot: #multipath -ll 36842b2b0001681f0000072293b28b78c Oct 30 00:57:38 | sdcu: rdac prio: inquiry command indicates error Oct 30 00:57:38 | sdgh: rdac prio: inquiry command indicates error mpathax (36842b2b0001681f0000072293b28b78c) dm-47 DELL,MD36xxi size=4.0G features='3 queue_if_no_path pg_init_retries 50' hwhandler='1 rdac' wp=rw |-+- policy='round-robin 0' prio=6 status=active | |- 4:0:0:48 sdbw 68:160 active ready running | `- 6:0:0:48 sdgq 132:96 active ready running `-+- policy='round-robin 0' prio=0 status=enabled |- 5:0:0:48 sdcu 70:32 failed faulty running `- 7:0:0:48 sdgh 131:208 failed faulty running * When controller A was made online, I was expecting state of paths from controller A to become active from failed which never happened. sg_inq on those physical paths still reported DID_TRANSPORT_FASTFAIL. --> controller A was made online -> cmgrSetAltToOptimal 10/30/10-05:50:04 (tShell1): NOTE: releasing alt ctl from reset #multipath -ll 36842b2b0001681f0000072293b28b78c Oct 30 00:57:38 | sdcu: rdac prio: inquiry command indicates error Oct 30 00:57:38 | sdgh: rdac prio: inquiry command indicates error mpathax (36842b2b0001681f0000072293b28b78c) dm-47 DELL,MD36xxi size=4.0G features='3 queue_if_no_path pg_init_retries 50' hwhandler='1 rdac' wp=rw |-+- policy='round-robin 0' prio=6 status=active | |- 4:0:0:48 sdbw 68:160 active ready running | `- 6:0:0:48 sdgq 132:96 active ready running `-+- policy='round-robin 0' prio=0 status=enabled |- 5:0:0:48 sdcu 70:32 failed faulty running `- 7:0:0:48 sdgh 131:208 failed faulty running @ Sat Oct 30 01:09:40 CDT 2010 sles111host:/tmp # sg_inq -p0x80 /dev/sdcu VPD INQUIRY: Unit serial number page inquiry: transport: Host_status=0x0f is invalid ---controller A path Driver_status=0x00 [DRIVER_OK, SUGGEST_OK] inquiry: failed, res=-1 @ Sat Oct 30 01:18:05 CDT 2010 sles111host:/tmp # sg_inq -p0x80 /dev/sdcu VPD INQUIRY: Unit serial number page inquiry: transport: Host_status=0x0f is invalid ---controller A path Driver_status=0x00 [DRIVER_OK, SUGGEST_OK] inquiry: failed, res=-1 @Sat Oct 30 01:31:33 CDT 2010 sles111host:/tmp/vijay # sg_inq -p0x80 /dev/sdcu VPD INQUIRY: Unit serial number page inquiry: transport: Host_status=0x0f is invalid ---controller A path Driver_status=0x00 [DRIVER_OK, SUGGEST_OK] inquiry: failed, res=-1 #multipath -ll 36842b2b0001681f0000072293b28b78c Oct 30 00:57:38 | sdcu: rdac prio: inquiry command indicates error Oct 30 00:57:38 | sdgh: rdac prio: inquiry command indicates error mpathax (36842b2b0001681f0000072293b28b78c) dm-47 DELL,MD36xxi size=4.0G features='3 queue_if_no_path pg_init_retries 50' hwhandler='1 rdac' wp=rw |-+- policy='round-robin 0' prio=6 status=active | |- 4:0:0:48 sdbw 68:160 active ready running | `- 6:0:0:48 sdgq 132:96 active ready running `-+- policy='round-robin 0' prio=0 status=enabled |- 5:0:0:48 sdcu 70:32 failed faulty running `- 7:0:0:48 sdgh 131:208 failed faulty running * When controller B was put offline then I could notice hang in multipathd. Here IO hang was noticed on physical paths of controller B. paths from controller A still reported DID_TRANSPORT_FAILFAST. --> controller B is offlined -> cmgrSetAltToFailed 1 10/30/10-06:52:56 (tShell1): NOTE: CCM: takeover() setting MOS 10/30/10-06:52:57 (tShell1): WARN: Alt Ctl Reboot: Reboot CompID: 0x407 Reboot reason: 0x6 Reboot reason extra: 0x0 #multipath -ll hang> In syslog Oct 30 01:56:35 sles111host kernel: [160171.336055] connection1:0: detected conn error (1011) Oct 30 01:59:35 sles111host kernel: [160351.644139] scsi 6:0:0:31: timing out command, waited 20s Oct 30 01:59:55 sles111host kernel: [160371.648142] scsi 6:0:0:31: timing out command, waited 20s Sat Oct 30 02:05:59 2010 localhost IOMonkey Warning: /home/dmMOUNT21 - No response for over 600 seconds on /home/dmMOUNT21:. Sat Oct 30 02:06:07 2010 localhost IOMonkey Warning: /home/dmMOUNT17 - No response for over 600 seconds on /home/dmMOUNT17:. Sat Oct 30 02:06:07 2010 localhost IOMonkey Warning: /home/dmMOUNT38 - No response for over 600 seconds on /home/dmMOUNT38:. Sa * Even when controller B was made online, Paths did not recover from hang. And I could still notice no response message in the syslog. --> controller B is made online -> cmgrSetAltToOptimal 10/30/10-07:07:05 (tShell1): NOTE: releasing alt ctl from reset value In syslog Sat Oct 30 02:11:12 2010 localhost IOMonkey Warning: /home/dmMOUNT43 - No response for over 900 seconds on /home/dmMOUNT43:. Sat Oct 30 02:11:12 2010 localhost IOMonkey Warning: /home/dmMOUNT44 - No response for over 900 seconds on /home/dmMOUNT44:. Sat Oct 30 02:11:12 2010 localhost IOMonkey Warning: /home/dmMOUNT45 - No response for over 900 seconds on /home/dmMOUNT45:. Sat Oct 30 02:11:12 2010 localhost IOMonkey Warning: /home/dmMOUNT46 - No response for over 900 seconds on /home/dmMOUNT46:. Sat Oct 30 02:11:12 2010 localhost IOMonkey Warning: /home/dmMOUNT47 - No response for over 900 seconds on /home/dmMOUNT47:. Sat Oct 30 02:11:12 2010 localhost IOMonkey Warning: /home/dmMOUNT48 - No response for over 900 seconds on /home/dmMOUNT48:. Sat Oct 30 02:11:12 2010 localhost IOMonkey Warning: /home/dmMOUNT49 - No response for over 900 seconds on /home/dmMOUNT49:. Sat Oct 30 02:11:27 2010 localhost IOMonkey Warning: /home/dmMOUNT22 - No response for over 900 seconds on /home/dmMOUNT22:. @ Sat Oct 30 02:19:01 CDT 2010 sles111host:~ # sg_inq -p0x80 /dev/sdcu VPD INQUIRY: Unit serial number page inquiry: transport: Host_status=0x0f is invalid Driver_status=0x00 [DRIVER_OK, SUGGEST_OK] ---controller A path inquiry: failed, res=-1 sles111host:~ # sg_inq -p0x80 /dev/sdgh VPD INQUIRY: Unit serial number page inquiry: transport: Host_status=0x0f is invalid ---controller A path Driver_status=0x00 [DRIVER_OK, SUGGEST_OK] inquiry: failed, res=-1 sles111host:~ # sg_inq -p0x80 /dev/sdgq VPD INQUIRY: Unit serial number page ---controller B path hang> sles111host:~ # sg_inq -p0x80 /dev/sdbw VPD INQUIRY: Unit serial number page ---controller B path hang> #multipath -ll 36842b2b0001681f0000072293b28b78c hang> Reproducible: Always Steps to Reproduce: 1. Map 50 LUNs from storage array to host and run IO to logical volumes for these devices 2. Manually fail one controller through the controller management GUI or with the serial console command 'cmgrSetAltToFailed 1' from the alternate controller. 3. Verify all volumes owned by the failed controller transfer to their non-preferred path 4. multipath -ll reports devices as active/active instead of active/failed 4. Revive the failed controller from the controller management GUI or with the serial console command 'cmgrSetAltToOptimal 1' from the alternate controller. Actual Results: multipath -ll hangs, sq_inq <failed device> reports DID_TRANSPORT_FASTFAIL forever, IO attempts on these devices hangs forever and IOMonkey reports 'No Response' messages. Expected Results: Devices failback and IOs complete successfully. This issue was also reproduced with 100 LUNs mapped and only 2 iSCSI sessions from the host to controller (twice as many DM logical devices, same number of physical devices seen by DM). This issue only appears with sufficient stress on the host. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 229603] kde and gnome unuseable after suspending
by bugzilla_noreply＠novell.com 01 Nov '10

01 Nov '10

https://bugzilla.novell.com/show_bug.cgi?id=229603 https://bugzilla.novell.com/show_bug.cgi?id=229603#c17 Suse Neumann <mikaoldfield(a)web.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |mikaoldfield(a)web.de --- Comment #17 from Suse Neumann <mikaoldfield(a)web.de> 2010-11-01 19:58:54 UTC --- Hi, Im a komplete newbee... I currently use Live-version from CD... When I close laptop on battery mode, will not wake up again. Also on sleep mode will not wake up properly... its a fujitsu lifebook A530, i3, with Intel graphics. Q: Does the installed version solve the problem? Or is there another work-around? This is still preventing me from fully installing Opensuse... as it means battery goes down quickly, and machine effectivly cannot be turned of, other than shutting down completely... Any one has a clue? Regards, Suse -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 523303] New: 2nd stage installation: no network -- improve information feedback (usability)
by bugzilla_noreply＠novell.com 01 Nov '10

01 Nov '10

http://bugzilla.novell.com/show_bug.cgi?id=523303 Summary: 2nd stage installation: no network -- improve information feedback (usability) Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 3 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/3.5; Linux 2.6.27.21-0.1-default; X11; x86_64) KHTML/3.5.10 (like Gecko) SUSE At the 2nd stage of installation at some point installer tries to get connected to some opensuse repo. Good. In case of _failure_ it shows _error_ dialog box with long message about error with accessing XYZ repo, and long text. Wrong. There is no error. Computer is simply off-line. So please improve this dialog -- check network first, and show the more calming message "You are probably off-line so repo XYZ is not reachable..." and so on. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13