October 2010 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 408334] wake on lan not working with "VT6120/VT6121/VT6122 Gigabit Ethernet Adapter"
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

https://bugzilla.novell.com/show_bug.cgi?id=408334 https://bugzilla.novell.com/show_bug.cgi?id=408334#c10 Brandon Philips <bphilips(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |CLOSED Resolution| |WONTFIX --- Comment #10 from Brandon Philips <bphilips(a)novell.com> 2010-10-01 01:59:32 UTC --- OpenSUSE 11.0 is no longer supported. Closing as WONTFIX. Please reopen if you can reproduce under 11.3. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 455788] ASUS eeePC ACPI failure
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

https://bugzilla.novell.com/show_bug.cgi?id=455788 https://bugzilla.novell.com/show_bug.cgi?id=455788#c14 --- Comment #14 from Brandon Philips <bphilips(a)novell.com> 2010-10-01 01:58:28 UTC --- Ping? Have you tested the kernel of the day? http://en.opensuse.org/openSUSE:Kernel_of_the_day -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 559018] New: Webcam does not work
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=559018 http://bugzilla.novell.com/show_bug.cgi?id=559018#c0 Summary: Webcam does not work Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: msvec(a)novell.com QAContact: qa(a)suse.de Found By: --- Blocker: --- When I plug it it I just get the following messages: kernel: usb 2-1: new high speed USB device using ehci_hcd and address 27 kernel: usb 2-1: device descriptor read/64, error 18 kernel: usb 2-1: device descriptor read/64, error 18 kernel: usb 2-1: new high speed USB device using ehci_hcd and address 28 kernel: usb 2-1: device descriptor read/64, error 18 kernel: usb 2-1: device descriptor read/64, error 18 kernel: usb 2-1: new high speed USB device using ehci_hcd and address 29 kernel: usb 2-1: device descriptor read/8, error -61 kernel: usb 2-1: device descriptor read/8, error -61 kernel: usb 2-1: new high speed USB device using ehci_hcd and address 30 kernel: usb 2-1: device descriptor read/8, error -61 kernel: usb 2-1: device descriptor read/8, error -61 kernel: hub 2-0:1.0: unable to enumerate USB device on port 1 kernel: usb 5-1: new full speed USB device using uhci_hcd and address 30 kernel: usb 5-1: device descriptor read/64, error 18 kernel: usb 5-1: device descriptor read/64, error 18 kernel: usb 5-1: new full speed USB device using uhci_hcd and address 31 kernel: usb 5-1: device descriptor read/64, error 18 kernel: usb 5-1: device descriptor read/64, error 18 kernel: usb 5-1: new full speed USB device using uhci_hcd and address 32 kernel: usb 5-1: device descriptor read/8, error -61 kernel: usb 5-1: device descriptor read/8, error -61 kernel: usb 5-1: new full speed USB device using uhci_hcd and address 33 kernel: usb 5-1: device descriptor read/8, error -61 kernel: usb 5-1: device descriptor read/8, error -61 kernel: hub 5-0:1.0: unable to enumerate USB device on port 1 It's the same webcam as referenced in bug 309540 (just different computer, notebook Dell Latitude D630, plugged directly into it). In 11.1 it worked fairly well. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 565741] New: via velocity: frame errors. *lots* of frame errors.
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=565741 http://bugzilla.novell.com/show_bug.cgi?id=565741#c0 Summary: via velocity: frame errors. *lots* of frame errors. Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 I have a machine with 2 or somethings 3 NICs in it for testing. The machine has a Realtek 8169 (built-in), a Broadcom/tg3, and a via velocity. When using the r8169, I get hard locks under heavy load. That is another bug. When using the tg3, I get some (but not a lot) of frame errors. When using the via velocity, I get a *lot* of frame errors: RX packets:41581170 errors:122433 dropped:0 overruns:0 frame:252290 This severely limits the card and causes all sorts of havoc. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 557623] New: regression: 8169 hangs hard under heavy load
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=557623 http://bugzilla.novell.com/show_bug.cgi?id=557623#c0 Summary: regression: 8169 hangs hard under heavy load Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: jnelson-suse(a)jamponi.net QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.4) Gecko/20091016 SUSE/3.5.4-1.1.2 Firefox/3.5.4 I have a box with a realtek8169 as the built in gigabit ethernet. I'm unable to put it under heavy network traffic as if I do the box hangs shortly thereafter. Can be replicated 100% of the time, within 2-3 minutes of heavy (network) load. Nov 22 16:34:33 frank kernel: [28634.284677] The following is only an harmless informational message. Nov 22 16:34:33 frank kernel: [28634.284687] Unless you get a _continuous_flood_ of these messages it means Nov 22 16:34:33 frank kernel: [28634.284693] everything is working fine. Allocations from irqs cannot be Nov 22 16:34:33 frank kernel: [28634.284697] perfectly reliable and the kernel is designed to handle that. Nov 22 16:34:33 frank kernel: [28634.284704] swapper: page allocation failure. order:0, mode:0x20 Nov 22 16:34:33 frank kernel: [28634.284713] Pid: 0, comm: swapper Not tainted 2.6.31.5-0.1-default #1 Nov 22 16:34:33 frank kernel: [28634.284718] Call Trace: Nov 22 16:34:33 frank kernel: [28634.284748] [<ffffffff81011749>] try_stack_unwind+0x189/0x1b0 Nov 22 16:34:33 frank kernel: [28634.284763] [<ffffffff8101013d>] dump_trace+0x9d/0x330 Nov 22 16:34:33 frank kernel: [28634.284776] [<ffffffff81011254>] show_trace_log_lvl+0x64/0x90 Nov 22 16:34:33 frank kernel: [28634.284787] [<ffffffff810112a3>] show_trace+0x23/0x40 Nov 22 16:34:33 frank kernel: [28634.284801] [<ffffffff81554378>] dump_stack+0x81/0x9e Nov 22 16:34:33 frank kernel: [28634.284814] [<ffffffff811110c2>] __alloc_pages_slowpath+0x572/0x580 Nov 22 16:34:33 frank kernel: [28634.284826] [<ffffffff81111221>] __alloc_pages_nodemask+0x151/0x160 Nov 22 16:34:33 frank kernel: [28634.284838] [<ffffffff8114beac>] kmem_getpages+0x6c/0x190 Nov 22 16:34:33 frank kernel: [28634.284850] [<ffffffff8114cfca>] fallback_alloc+0x1ca/0x290 Nov 22 16:34:33 frank kernel: [28634.284861] [<ffffffff8114cd10>] ____cache_alloc_node+0xb0/0x1a0 Nov 22 16:34:33 frank kernel: [28634.284874] [<ffffffff8114c1a2>] kmem_cache_alloc_node+0xa2/0x220 Nov 22 16:34:33 frank kernel: [28634.284885] [<ffffffff8114c39f>] __kmalloc_node+0x7f/0x110 Nov 22 16:34:33 frank kernel: [28634.284898] [<ffffffff81461cf4>] __alloc_skb+0x84/0x1a0 Nov 22 16:34:33 frank kernel: [28634.284910] [<ffffffff81462150>] __netdev_alloc_skb+0x40/0x80 Nov 22 16:34:33 frank kernel: [28634.284936] [<ffffffffa011f0a8>] rtl8169_rx_fill+0xc8/0x280 [r8169] Nov 22 16:34:34 frank kernel: [28634.284966] [<ffffffffa011f63c>] rtl8169_rx_interrupt+0x3dc/0x590 [r8169] Nov 22 16:34:34 frank kernel: [28634.284990] [<ffffffffa0120bca>] rtl8169_poll+0x4a/0x298 [r8169] Nov 22 16:34:34 frank kernel: [28634.285011] [<ffffffff81470b49>] net_rx_action+0x149/0x2e0 Nov 22 16:34:34 frank kernel: [28634.285024] [<ffffffff81076713>] __do_softirq+0xd3/0x240 Nov 22 16:34:34 frank kernel: [28634.285035] [<ffffffff8100d80c>] call_softirq+0x1c/0x30 Nov 22 16:34:34 frank kernel: [28634.285046] [<ffffffff8100f8c5>] do_softirq+0xb5/0x110 Nov 22 16:34:34 frank kernel: [28634.285056] [<ffffffff810763a5>] irq_exit+0xb5/0xd0 Nov 22 16:34:34 frank kernel: [28634.285066] [<ffffffff8100ed1c>] do_IRQ+0x7c/0x100 Nov 22 16:34:34 frank kernel: [28634.285078] [<ffffffff8100d013>] ret_from_intr+0x0/0x11 Nov 22 16:34:34 frank kernel: [28634.285092] [<ffffffff81039766>] native_safe_halt+0x6/0x10 Nov 22 16:34:34 frank kernel: [28634.285107] [<ffffffff810168c2>] default_idle+0x62/0x120 Nov 22 16:34:34 frank kernel: [28634.285119] [<ffffffff81016a42>] c1e_idle+0xc2/0x170 Nov 22 16:34:34 frank kernel: [28634.285129] [<ffffffff8100b44c>] cpu_idle+0xcc/0x120 Nov 22 16:34:34 frank kernel: [28634.285140] [<ffffffff8153da49>] rest_init+0x79/0xa0 Nov 22 16:34:34 frank kernel: [28634.285152] [<ffffffff819e4766>] start_kernel+0x3db/0x3f8 Nov 22 16:34:34 frank kernel: [28634.285165] [<ffffffff819e370d>] x86_64_start_reservations+0x134/0x14f Nov 22 16:34:34 frank kernel: [28634.285176] [<ffffffff819e3883>] x86_64_start_kernel+0x15b/0x17e Nov 22 16:34:34 frank kernel: [28634.285185] Mem-Info: Nov 22 16:34:34 frank kernel: [28634.285189] Node 0 DMA per-cpu: Nov 22 16:34:34 frank kernel: [28634.285196] CPU 0: hi: 0, btch: 1 usd: 0 Nov 22 16:34:34 frank kernel: [28634.285201] CPU 1: hi: 0, btch: 1 usd: 0 Nov 22 16:34:34 frank kernel: [28634.285206] CPU 2: hi: 0, btch: 1 usd: 0 Nov 22 16:34:34 frank kernel: [28634.285210] CPU 3: hi: 0, btch: 1 usd: 0 Nov 22 16:34:34 frank kernel: [28634.285214] Node 0 DMA32 per-cpu: Nov 22 16:34:34 frank kernel: [28634.285220] CPU 0: hi: 186, btch: 31 usd: 170 Nov 22 16:34:34 frank kernel: [28634.285226] CPU 1: hi: 186, btch: 31 usd: 162 Nov 22 16:34:34 frank kernel: [28634.285231] CPU 2: hi: 186, btch: 31 usd: 182 Nov 22 16:34:34 frank kernel: [28634.285235] CPU 3: hi: 186, btch: 31 usd: 178 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 544567] New: kernel warning at boot: proc_dir_entry '17/eth0' already registered
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=544567 User koenig(a)linux.de added comment http://bugzilla.novell.com/show_bug.cgi?id=544567#c1 Summary: kernel warning at boot: proc_dir_entry '17/eth0' already registered Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: koenig(a)linux.de QAContact: qa(a)suse.de Found By: --- I've updated a plain 11.1 DVD9 installation to factory and now I get the following kernel warning below at boot. the PC has two ethernet chips (marvell 88E8001 is on the asus main board): linux-xlya:~ # lspci | grep -i ether 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 00:0c.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05) linux-xlya:~ # ifconfig -a | grep eth eth0 Link encap:Ethernet HWaddr 00:0E:0C:D9:60:B2 eth1 Link encap:Ethernet HWaddr 00:11:2F:A7:FA:25 eth0 is the E1000 pci card which is used, the onboard eth1 is idle. linux-xlya:~ # dmesg | grep -i eth [ 10.032142] skge eth0: addr 00:11:2f:a7:fa:25 [ 10.545989] eth0 renamed to eth1 by udevd [398] [ 10.711987] udev: renamed network interface eth0 to eth1 [ 12.723794] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 21.260252] proc_dir_entry '17/eth0' already registered [ 21.260962] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.261452] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 21.261668] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.689010] eth0: no IPv6 routers present [ 19.857995] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00) [ 19.858092] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 19.858097] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8 [ 19.858101] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa [ 19.858106] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 21.260226] ------------[ cut here ]------------ [ 21.260240] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.31/linux-2.6.31/fs/proc/generic.c:590 proc_register+0xc1/0x180() [ 21.260248] Hardware name: To Be Filled By O.E.M. [ 21.260252] proc_dir_entry '17/eth0' already registered [ 21.260255] Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables fuse loop dm_mod amd64_edac_mod snd_via82xx snd_via82xx_modem ppdev gameport snd_mpu401_uart shpchp snd_ac97_codec ac97_bus snd_pcm snd_timer snd_rawmidi snd_seq_device pcspkr edac_core k8temp snd_page_alloc snd i2c_viapro sg sr_mod cdrom floppy parport_pc parport ohci1394 button ieee1394 pci_hotplug skge e1000 preloadtrace edd fan ide_pci_generic via82cxxx ide_core ata_generic pata_via sata_via sata_promise thermal processor thermal_sys [ 21.260338] Pid: 1673, comm: ip Not tainted 2.6.31-10-desktop #1 [ 21.260342] Call Trace: [ 21.260357] [<ffffffff81011899>] try_stack_unwind+0x189/0x1b0 [ 21.260367] [<ffffffff810100dd>] dump_trace+0xad/0x3a0 [ 21.260375] [<ffffffff810113a4>] show_trace_log_lvl+0x64/0x90 [ 21.260384] [<ffffffff810113f3>] show_trace+0x23/0x40 [ 21.260393] [<ffffffff8154c435>] dump_stack+0x81/0x9e [ 21.260402] [<ffffffff81069a60>] warn_slowpath_common+0x80/0xd0 [ 21.260411] [<ffffffff81069b3b>] warn_slowpath_fmt+0x4b/0x70 [ 21.260419] [<ffffffff811b4cb1>] proc_register+0xc1/0x180 [ 21.260428] [<ffffffff811b4fdc>] proc_mkdir_mode+0x4c/0x80 [ 21.260436] [<ffffffff811b5034>] proc_mkdir+0x24/0x40 [ 21.260446] [<ffffffff810cf09b>] register_handler_proc+0x11b/0x140 [ 21.260455] [<ffffffff810cc5cc>] __setup_irq+0x1ec/0x330 [ 21.260464] [<ffffffff810cc822>] request_threaded_irq+0x112/0x220 [ 21.260483] [<ffffffffa00bbc30>] e1000_request_irq+0x50/0x110 [e1000] [ 21.260499] [<ffffffffa00c2e08>] e1000_open+0xb8/0x1a0 [e1000] [ 21.260513] [<ffffffff81460729>] dev_open+0xb9/0x120 [ 21.260522] [<ffffffff81460530>] dev_change_flags+0xa0/0x1e0 [ 21.260532] [<ffffffff8146d57e>] do_setlink+0x22e/0x4d0 [ 21.260540] [<ffffffff8146e6d6>] rtnl_newlink+0x456/0x530 [ 21.260549] [<ffffffff8146e0f0>] rtnetlink_rcv_msg+0x200/0x240 [ 21.260558] [<ffffffff81485bf9>] netlink_rcv_skb+0xc9/0x100 [ 21.260567] [<ffffffff8146debf>] rtnetlink_rcv+0x2f/0x60 [ 21.260575] [<ffffffff814852bf>] netlink_unicast+0x2ef/0x310 [ 21.260583] [<ffffffff81486838>] netlink_sendmsg+0x248/0x330 [ 21.260593] [<ffffffff8144b985>] sock_sendmsg+0x115/0x160 [ 21.260602] [<ffffffff8144c7f3>] sys_sendmsg+0x223/0x390 [ 21.260611] [<ffffffff8100c682>] system_call_fastpath+0x16/0x1b [ 21.260622] [<00007f2685b262e0>] 0x7f2685b262e0 [ 21.260628] ---[ end trace ff0b40b8233e52ee ]--- [ 21.260962] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.261452] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 21.261668] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.424654] NET: Registered protocol family 17 [ 21.588025] Clocksource tsc unstable (delta = -75244598 ns) [ 31.689010] eth0: no IPv6 routers present [ 34.389493] bootsplash: status on console 0 changed to on -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 537111] New: Fails to identify RealTeck RTL8103 Network Card in Inspiron 1440
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=537111 Summary: Fails to identify RealTeck RTL8103 Network Card in Inspiron 1440 Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 6 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ivivat(a)live.com QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1.2 Firefox/3.0.13 On a Dell Inspiron 1440 Laptop with a RealTeck RTL8103 Network Card, the Network Installation CD for SuSe 11.2 Milestone 6 find an error during the automatic installation and drops into a manual installation regime. Then after downloading the 1-6 parts of linux kernel modules gives a message that kernel does not recognize the network card. The released 11.1 version of SuSe does not iven see this card. Please Help! Reproducible: Always Steps to Reproduce: 1. Put an SuSe 11.2 Milestone 6 Network installation x86_64 CD media 2. Start Network installation 3. Ufter loadind 1-6 parts of kernel fails to identify Inspiron 1440, RealTeck RTL8103 Network card! Expected Results: identify Inspiron 1440, RealTeck RTL8103 Network card! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 569475] New: atl1c didn't work after woke up from suspend (S3)
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=569475 http://bugzilla.novell.com/show_bug.cgi?id=569475#c0 Summary: atl1c didn't work after woke up from suspend (S3) Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: slider1024(a)gmail.com QAContact: qa(a)suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.1.6) Gecko/20091201 Firefox/3.5.6 on eee1005ha network(atl1c) doesn't work after back from suspend or hibernate Reproducible: Always Steps to Reproduce: enter eee1005ha in hibernation or standby Actual Results: 1)after leaving it, the network (atl1c) disappears eth0, and lspci does not show the network card (atl1c) 2)Network Interface Card (atl1c) is presented after the reboot Expected Results: NIC (atl1c) should continue to work after leaving a sleeping or waiting mode all earned after installing kernel 2.6.32-41-default 2.6.32. contains a fix -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 553616] New: em28xx-dvb work around to use my usb em2880 - xceive xc3028A usb DVB-T card without any brand but I think is a pinnacle
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=553616 Summary: em28xx-dvb work around to use my usb em2880 - xceive xc3028A usb DVB-T card without any brand but I think is a pinnacle Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: diego.ercolani(a)gmail.com QAContact: qa(a)suse.de Found By: --- Created an attachment (id=326149) --> (http://bugzilla.novell.com/attachment.cgi?id=326149) photo of the DVB-T usb card User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; it; rv:1.9.0.15) Gecko/2009102100 SUSE/3.0.15-0.1.2 Firefox/3.0.15 To use this TV adapter, I always used the method suggested by http://en.opensuse.org/Pinnacle_USB_PCTV, but from some months the em28xx driver has been merged into standard linuxtv distribution. The kernel version of linuxtv distribution drivers are finally with em28xx-dvb support. Current kernel distribuitted by SuSE (OpenSuSE 11.1) is 2.6.27.37-0.1-default and contains modules to support my dvb-t adapter: modprobe -l | grep em28xx /lib/modules/2.6.27.37-0.1-default/kernel/drivers/media/video/em28xx/em28xx.ko /lib/modules/2.6.27.37-0.1-default/kernel/drivers/media/video/em28xx/em28xx-alsa.ko /lib/modules/2.6.27.37-0.1-default/kernel/drivers/media/video/em28xx/em28xx-dvb.ko I have currently installed the firmware for the xc3028 tuner and I've ever been able to watch TV using this card under linux... sadly modifying the card number and other parameters from time to time. I developed a bash script that try to load em28xx module with different card numbers (as my card isn't recognized as specific em28xx card but only generic) and stops when a em28xx insertion make appear a /dev/dvb device. This is the script: >>>>>>>>>>>>>em28xx-insert-loop.sh>>>>>>>>>>>>>>>>>>> #!/bin/bash start=0 before=$(lsmod | wc -l) #before=92 while [ `lsmod | wc -l` -gt $before ]; do after=$(lsmod | wc -l) diff=$[after-before] echo "diff=$diff" lsmod | head -$[${diff}+1] | awk '$3==0 { a="rmmod "$1; print a; system(a); }' done for i in $(seq $start 80); do echo card=$i; modprobe em28xx card=$i; modprobe em28xx-dvb; sleep 4; echo $!; ls -l /dev/dvb && /bin/bash; sync; while [ `lsmod | wc -l` -gt $before ]; do after=$(lsmod | wc -l) diff=$[after-before] echo "diff=$diff" lsmod | head -$[${diff}+1] | awk '$3==0 { a="rmmod "$1; print a; system(a); }' done done <<<<<<<<<<<<<<<<<<em28xx-insert-loop.sh<<<<<<<<<<<<<< the script is very simple. It suppose that currently we don't have em28xx and related modules loaded, it begin from card=0 parameter passed to em28xx module to 80. Every time script inserts em28xx (and related modules), test if it is present a /dev/dvb device then remove the installed modules, increment the card index and cycle.... With current version of the kernel distribuited by SuSE I have a strange behaviour: My script stop executing with card number 10 (card=10 -> Hauppauge WinTV HVR 900) and card number 11 (card=11 -> Terratec Hybrid XS). When the script loads card number 10, in messages there are these lines: casaregno:~ # /sbin/modprobe --ignore-install em28xx video_nr=1 vbi_nr=1 radio_nr=1 card=11 && /sbin/modprobe em28xx-dvb debug=1 && /sbin/modprobe em28xx-alsa >>>>>>>>>>>>>modprobe em28xx card=10>>>>>>>>>>>>>>>>>>>>>>> [...] Nov 7 21:08:50 casaregno kernel: EEPROM ID= 0x9567eb1a, hash = 0xb8846b20 Nov 7 21:08:50 casaregno kernel: Vendor/Product ID= eb1a:2881 Nov 7 21:08:50 casaregno kernel: AC97 audio (5 sample rates) Nov 7 21:08:50 casaregno kernel: USB Remote wakeup capable Nov 7 21:08:50 casaregno kernel: 500mA max power Nov 7 21:08:50 casaregno kernel: Table at 0x04, strings=0x206a, 0x006a, 0x0000 Nov 7 21:08:50 casaregno kernel: tveeprom 6-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. Nov 7 21:08:50 casaregno kernel: tuner-simple 6-0061: creating new instance Nov 7 21:08:50 casaregno kernel: tuner-simple 6-0061: type set to 0 (Temic PAL (4002 FH5)) Nov 7 21:08:50 casaregno kernel: tvp5150 6-005c: tvp5150am1 detected. Nov 7 21:08:51 casaregno kernel: em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1 Nov 7 21:08:51 casaregno kernel: em28xx #0: Found Hauppauge WinTV HVR 900 Nov 7 21:08:51 casaregno kernel: em28xx audio device (eb1a:2881): interface 1, class 1 Nov 7 21:08:51 casaregno kernel: em28xx audio device (eb1a:2881): interface 2, class 1 Nov 7 21:08:51 casaregno kernel: usbcore: registered new interface driver em28xx Nov 7 21:08:51 casaregno kernel: xc2028 6-0061: creating new instance Nov 7 21:08:51 casaregno kernel: xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner Nov 7 21:08:51 casaregno kernel: em28xx #0/2: xc3028 attached Nov 7 21:08:51 casaregno kernel: DVB: registering new adapter (em28xx #0) Nov 7 21:08:51 casaregno kernel: DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... Nov 7 21:08:51 casaregno kernel: Successfully loaded em28xx-dvb Nov 7 21:08:51 casaregno kernel: Em28xx: Initialized (Em28xx dvb Extension) extension Nov 7 21:08:51 casaregno kernel: Em28xx: Initialized (Em28xx Audio Extension) extension Nov 7 21:08:51 casaregno kernel: usbcore: registered new interface driver snd-usb-audio Nov 7 21:08:51 casaregno kernel: tvp5150 6-005c: tvp5150am1 detected. Nov 7 21:08:52 casaregno pulseaudio[9388]: alsa-util.c: Error opening PCM device hw:3: Permission denied Nov 7 21:08:52 casaregno pulseaudio[9388]: module.c: Failed to load module "module-alsa-source" (argument: "device_id=3 source_name=alsa_input.usb_device_eb1a_2881_noserial_if1_sound_card_0_alsa_capture_0_0 tsched=1"): initialization failed. <<<<<<<<<<<<<<<<<<<<<<<<modprobe em28xx card=10<<<<<<<<<<<<<<<<<<<< and when I try to watch a dvb channel, I can't (infact module insertion complaints about non complaiant or corrupted eprom) and log/messages file is filled of these lines: >>>>>>>>>>>>>>>>>>>>>>>log/messages when trying to watch a dvb channel>>>>>>>>>> Nov 7 21:09:35 casaregno kernel: xc2028 6-0061: xc2028/3028 firmware name not set! Nov 7 21:09:36 casaregno kernel: xc2028 6-0061: xc2028/3028 firmware name not set! Nov 7 21:09:37 casaregno kernel: xc2028 6-0061: xc2028/3028 firmware name not set! Nov 7 21:09:38 casaregno kernel: xc2028 6-0061: xc2028/3028 firmware name not set! <<<<<<<<<<<<<<<<<<<log/messages when trying to watch a dvb channel<<<<<<<<<< without removing the card, I unload the em28xx and em28xx-dvb module then I load the same module with card=11 parameter, these are the lines in messages file: casaregno:~ # modprobe -r snd_usb_audio em28xx_dvb dvb_core snd_usb_lib snd_hwdep tuner_simple tuner_types tuner_xc2028 zl10353 tvp5150 >>>>>>>>>>>corresponding log/messages file>>>>>>>>>>> Nov 7 21:10:42 casaregno kernel: Em28xx: Removed (Em28xx Audio Extension) extension Nov 7 21:11:04 casaregno kernel: usbcore: deregistering interface driver snd-usb-audio Nov 7 21:11:04 casaregno kernel: xc2028 6-0061: destroying instance Nov 7 21:11:04 casaregno kernel: Em28xx: Removed (Em28xx dvb Extension) extension Nov 7 21:11:04 casaregno kernel: usbcore: deregistering interface driver em28xx Nov 7 21:11:04 casaregno kernel: em28xx #0: disconnecting em28xx #0 video Nov 7 21:11:04 casaregno kernel: em28xx #0: V4L2 devices /dev/video1 and /dev/vbi1 deregistered Nov 7 21:11:04 casaregno kernel: tuner-simple 6-0061: destroying instance <<<<<<<<<<<<<<<<corresponding log/messages file<<<<<<<<<<<<<<<<<< casaregno:~ # /sbin/modprobe --ignore-install em28xx video_nr=1 vbi_nr=1 radio_nr=1 card=11 && /sbin/modprobe em28xx-dvb debug=1 && /sbin/modprobe em28xx-alsa >>>>>>>>>>>>>>>corresponding log/messages file>>>>>>>>>>>>>>>>>>>> Nov 7 21:13:09 casaregno kernel: EEPROM ID= 0x9567eb1a, hash = 0xb8846b20 Nov 7 21:13:09 casaregno kernel: Vendor/Product ID= eb1a:2881 Nov 7 21:13:09 casaregno kernel: AC97 audio (5 sample rates) Nov 7 21:13:09 casaregno kernel: USB Remote wakeup capable Nov 7 21:13:09 casaregno kernel: 500mA max power Nov 7 21:13:09 casaregno kernel: Table at 0x04, strings=0x206a, 0x006a, 0x0000 Nov 7 21:13:09 casaregno kernel: xc2028 6-0061: creating new instance Nov 7 21:13:09 casaregno kernel: xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner Nov 7 21:13:09 casaregno kernel: firmware: requesting xc3028-v27.fw Nov 7 21:13:09 casaregno kernel: xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 Nov 7 21:13:09 casaregno kernel: xc2028 6-0061: Loading firmware for type=BASE (1), id 0000000000000000. Nov 7 21:13:10 casaregno kernel: xc2028 6-0061: Loading firmware for type=(0), id 000000000000b700. Nov 7 21:13:10 casaregno kernel: SCODE (20000000), id 000000000000b700: Nov 7 21:13:10 casaregno kernel: xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. Nov 7 21:13:10 casaregno kernel: tvp5150 6-005c: tvp5150am1 detected. Nov 7 21:13:10 casaregno kernel: em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1 Nov 7 21:13:10 casaregno kernel: em28xx #0: Found Terratec Hybrid XS Nov 7 21:13:10 casaregno kernel: em28xx audio device (eb1a:2881): interface 1, class 1 Nov 7 21:13:10 casaregno kernel: em28xx audio device (eb1a:2881): interface 2, class 1 Nov 7 21:13:10 casaregno kernel: usbcore: registered new interface driver em28xx Nov 7 21:13:10 casaregno kernel: usbcore: registered new interface driver snd-usb-audio Nov 7 21:13:10 casaregno kernel: xc2028 6-0061: attaching existing instance Nov 7 21:13:10 casaregno kernel: xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner Nov 7 21:13:10 casaregno kernel: em28xx #0/2: xc3028 attached Nov 7 21:13:10 casaregno kernel: DVB: registering new adapter (em28xx #0) Nov 7 21:13:10 casaregno kernel: DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... Nov 7 21:13:10 casaregno kernel: Successfully loaded em28xx-dvb Nov 7 21:13:10 casaregno kernel: Em28xx: Initialized (Em28xx dvb Extension) extension Nov 7 21:13:10 casaregno kernel: Em28xx: Initialized (Em28xx Audio Extension) extension Nov 7 21:13:11 casaregno kernel: tvp5150 6-005c: tvp5150am1 detected. Nov 7 21:13:11 casaregno pulseaudio[9388]: alsa-util.c: Cannot find fallback mixer control "Mic". <<<<<<<<<<<<<<<<<<corresponding log/messages file<<<<<<<<<<<<<<<<< and I can see dvb channel, in the messages file I see the firmware loading: >>>>>>>>>>>>>>>>>log/messages while I start to see a DVB channel>>>>>>>>>>>>>> Nov 7 21:13:55 casaregno kernel: xc2028 6-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. Nov 7 21:13:56 casaregno kernel: xc2028 6-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000. Nov 7 21:13:56 casaregno kernel: xc2028 6-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Now here it comes the problem: It seem that my card is working when invoking /sbin/modprobe --ignore-install em28xx video_nr=1 vbi_nr=1 radio_nr=1 card=11 && /sbin/modprobe em28xx-dvb debug=1 && /sbin/modprobe em28xx-alsa but If I remove all the modules: casaregno:~ # modprobe -r em28xx_alsa snd_usb_audio snd_usb_lib em28xx_dvb dvb_core snd_hwdep tvp5150 em28xx videobuf_vmalloc tuner_xc2028 zl10353 Then I unplug the usb card, I replug the card. I remove the modules autoloaded by my kernel (that try to configure my card as generic em28xx card): >>>>>>>>>>>>>>>>>>>>>>>authomatic recognized card>>>>>>>>>>>>>>>>>>>>>>>>> Nov 7 21:18:17 casaregno kernel: tvp5150 6-005c: tvp0150am1 detected. Nov 7 21:18:17 casaregno kernel: em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1 Nov 7 21:18:17 casaregno kernel: em28xx #0: Found Unknown EM2750/28xx video grabber Nov 7 21:18:17 casaregno kernel: em28xx audio device (eb1a:2881): interface 1, class 1 Nov 7 21:18:17 casaregno kernel: em28xx audio device (eb1a:2881): interface 2, class 1 Nov 7 21:18:18 casaregno kernel: usbcore: registered new interface driver em28xx Nov 7 21:18:18 casaregno kernel: usbcore: registered new interface driver snd-usb-audio Nov 7 21:18:18 casaregno kernel: tvp5150 6-005c: tvp5150am1 detected. <<<<<<<<<<<<<<<<<<<<<<authomatic recognized card<<<<<<<<<<<<<<<<<<<<< Then I remove the modules autoloaded by my kernel: casaregno:~ # modprobe -r snd_usb_audio snd_usb_lib snd_hwdep tvp5150 em28xx videobuf_vmalloc >>>>>>>>>>>>>>>>>>>>modules remove>>>>>>>>>>>>>>>>>>>> Nov 7 21:18:40 casaregno kernel: usbcore: deregistering interface driver snd-usb-audio Nov 7 21:18:40 casaregno kernel: usbcore: deregistering interface driver em28xx Nov 7 21:18:40 casaregno kernel: em28xx #0: disconnecting em28xx #0 video Nov 7 21:18:40 casaregno kernel: em28xx #0: V4L2 devices /dev/video1 and /dev/vbi1 deregistered <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Load the modules with the parameters I found to be correct: casaregno:~ # /sbin/modprobe --ignore-install em28xx video_nr=1 vbi_nr=1 radio_nr=1 card=11 && /sbin/modprobe em28xx-dvb debug=1 && /sbin/modprobe em28xx-alsa >>>>>>>>>>>>>>>>>>>>>>>>corresponding log/messages>>>>>>>>>>>>>>>>>>>> Nov 7 21:23:04 casaregno kernel: EEPROM ID= 0x9567eb1a, hash = 0xb8846b20 Nov 7 21:23:04 casaregno kernel: Vendor/Product ID= eb1a:2881 Nov 7 21:23:04 casaregno kernel: AC97 audio (5 sample rates) Nov 7 21:23:04 casaregno kernel: USB Remote wakeup capable Nov 7 21:23:04 casaregno kernel: 500mA max power Nov 7 21:23:04 casaregno kernel: Table at 0x04, strings=0x206a, 0x006a, 0x0000 Nov 7 21:23:05 casaregno kernel: xc2028 6-0061: creating new instance Nov 7 21:23:05 casaregno kernel: xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner Nov 7 21:23:05 casaregno kernel: firmware: requesting xc3028-v27.fw Nov 7 21:23:05 casaregno kernel: xc2028 6-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 Nov 7 21:23:05 casaregno kernel: xc2028 6-0061: Loading firmware for type=BASE (1), id 0000000000000000. Nov 7 21:23:06 casaregno kernel: xc2028 6-0061: Loading firmware for type=(0), id 000000000000b700. Nov 7 21:23:06 casaregno kernel: SCODE (20000000), id 000000000000b700: Nov 7 21:23:06 casaregno kernel: xc2028 6-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. Nov 7 21:23:06 casaregno kernel: tvp5150 6-005c: tvp5150am1 detected. Nov 7 21:23:06 casaregno kernel: em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1 Nov 7 21:23:06 casaregno kernel: em28xx #0: Found Terratec Hybrid XS Nov 7 21:23:06 casaregno kernel: em28xx audio device (eb1a:2881): interface 1, class 1 Nov 7 21:23:06 casaregno kernel: em28xx audio device (eb1a:2881): interface 2, class 1 Nov 7 21:23:06 casaregno kernel: usbcore: registered new interface driver em28xx Nov 7 21:23:06 casaregno kernel: zl10353_read_register: readreg error (reg=127, ret==-19) Nov 7 21:23:06 casaregno kernel: em28xx #0/2: dvb frontend not attached. Can't attach xc3028 Nov 7 21:23:06 casaregno kernel: Em28xx: Initialized (Em28xx dvb Extension) extension Nov 7 21:23:06 casaregno kernel: Em28xx: Initialized (Em28xx Audio Extension) extension Nov 7 21:23:06 casaregno kernel: usbcore: registered new interface driver snd-usb-audio Nov 7 21:23:06 casaregno kernel: tvp5150 6-005c: tvp5150am1 detected. Nov 7 21:23:07 casaregno pulseaudio[9388]: alsa-util.c: Cannot find fallback mixer control "Mic". <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< It's possible to notice there are many errors in the last log... and of course, card doesn't work, but before, the same module loading was correctly executed and card was usable. Of course, if I remove the modules, load em28xx module with card=10, unload, then reload with card=11, dvb card return working. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 558211] New: LED on asus does not switch off
by bugzilla_noreply＠novell.com 01 Oct '10

01 Oct '10

http://bugzilla.novell.com/show_bug.cgi?id=558211 http://bugzilla.novell.com/show_bug.cgi?id=558211#c0 Summary: LED on asus does not switch off Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: NesmrtelnyDzin(a)gmail.com QAContact: qa(a)suse.de CC: jslaby(a)novell.com Found By: --- Blocker: --- I have asus F3JC. There is webcam above LCD. Next to cam is green light. This light is switch on when flash properties are shown or skype start to operate with camera. Probably when system (application) scan camera, they switch on LED, but they do not switch off. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13