April 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 413904] New: Ricoh MMC card reader doesn't function
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=413904 Summary: Ricoh MMC card reader doesn't function Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Hotplug AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jos.baudrez(a)telenet.be QAContact: qa(a)suse.de Found By: --- When an SD card gets inserted in the slot on my Thinkpad x61s, I do not get any response; fdisk -l doesn't see anything in there and the var/log/messages file says: sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:05:00.2 [1180:0822] (rev 21) ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 18 sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it. PCI: Setting latency timer of device 0000:05:00.2 to 64 mmc0: SDHCI at 0xf8301800 irq 18 DMA mmc0: new high speed SD card at address b368 mmcblk0: mmc0:b368 SD 1997312KiB mmcblk0:<3>mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 printk: 3 messages suppressed. Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 ldm_validate_partition_table(): Disk read failed. mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 Buffer I/O error on device mmcblk0, logical block 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 24 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 unable to read partition table mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 0 end_request: I/O error, dev mmcblk0, sector 8 end_request: I/O error, dev mmcblk0, sector 16 end_request: I/O error, dev mmcblk0, sector 24 I have been told this is a 'new' bug, so i start a new thread. If i can be of any further use pls. let me know! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 20

[Bug 466894] New: single-user boot with /boot on RAID-1 fails to find existing boot & some-not-all other devices
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=466894 User pgnet.trash(a)gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=466894#c1 Summary: single-user boot with /boot on RAID-1 fails to find existing boot & some-not-all other devices Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pgnet.trash(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9) Gecko/2008052906 Firefox/3.0 I'm running uname -a Linux server 2.6.27.7-9-default #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64 x86_64 GNU/Linux I've patched OS 11.1's "/lib/mkinitrd/scripts/setup-md.sh", per, "Bug 461673 - xen/kernel-xen on OpenSuse 11.1 not starting; OK on OpenSuse 11.0" https://bugzilla.novell.com/show_bug.cgi?id=461673 my setup is RAID-1 based, disks sdc+sdd /boot on /dev/md0, fmt=ext3 swap on /dev/md1, fmt=swap /root on /dev/md2:VG(VG_Dom0):LV(LV_ROOT), fmt=ext3 /home/store on /dev/md3:VG(VG_DomU):LV(store), fmt=ext3 /home/work on /dev/md3:VG(VG_DomU):LV(work), fmt=ext3 disks sda+sdb 'other' on /dev/md4 'other' on /dev/md5 & boots OK, df -H Filesystem Size Used Avail Use% Mounted on /dev/mapper/VG_Dom0-LV_ROOT 13G 5.5G 6.6G 46% / udev 4.2G 213k 4.2G 1% /dev /dev/md0 152M 53M 91M 37% /boot none 68M 0 68M 0% /tmp /dev/mapper/VG_DomU-store 5.3G 4.5G 572M 89% /home/store /dev/mapper/VG_DomU-work 11G 451M 9.6G 5% /home/work with all RAID devs available (i'm curious/concerned about the "resync=PENDING .. tbd later ...), cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [linear] md5 : active (auto-read-only) raid1 sda2[0] sdb2[1] 347606300 blocks super 1.0 [2/2] [UU] resync=PENDING bitmap: 332/332 pages [1328KB], 512KB chunk md4 : active (auto-read-only) raid1 sda1[0] sdb1[1] 629145424 blocks super 1.0 [2/2] [UU] resync=PENDING bitmap: 293/300 pages [1172KB], 1024KB chunk md3 : active raid1 sdc4[0] sdd4[1] 230934236 blocks super 1.0 [2/2] [UU] bitmap: 0/441 pages [0KB], 256KB chunk md0 : active raid1 sdc1[0] sdd1[1] 152604 blocks super 1.0 [2/2] [UU] bitmap: 0/10 pages [0KB], 8KB chunk md1 : active raid1 sdc2[0] sdd2[1] 522100 blocks super 1.0 [2/2] [UU] bitmap: 0/8 pages [0KB], 32KB chunk md2 : active raid1 sdc3[0] sdd3[1] 12578820 blocks super 1.0 [2/2] [UU] bitmap: 5/192 pages [20KB], 32KB chunk If I reboot this setup to single user, title OS 11.1 SINGLE_USER root (hd0,0) kernel /vmlinuz single root=/dev/system/ROOT iommu=force irqpoll initrd /initrd @ shell prompt, ls /boot is completely empty. looks like /boot on /dev/md0 is not mounted at all. checking cat /proc/mdstat Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [linear] md1 : active (auto-read-only) raid1 sdc2[0] sdd2[1] 522100 blocks super 1.0 [2/2] [UU] bitmap: 0/8 pages [0KB], 32KB chunk md2 : active raid1 sdc3[0] sdd3[1] 12578820 blocks super 1.0 [2/2] [UU] bitmap: 7/192 pages [28KB], 32KB chunk md0, md3, md4 & md5 are missing. md4/5, i suspect, because the associated drives are hanging off of a PCI/SATA card ... but shouldn't md0 & md3 both be there & mounted? attempting to mount mount -a mount: special device /dev/md0 does not exist mount: special device /dev/VG_DomU/store does not exist mount: special device /dev/VG_DomU/work does not exist they're apparently not-mountable :-/ Reading @ possibly relevant, Bug 445490 - boot stops on mounting a software RAID - Invalid root filesystem https://bugzilla.novell.com/show_bug.cgi?id=445490#c19 it looked worth a try. applying the referenced patch to, /lib/mkinitrd/scripts/boot-md.sh and rebooting, unfortunately, makes no difference; md0/3/4/5 are still missing in single-user. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 490958] New: Starting a Qt4 app maximizes all minimized applications
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=490958 Summary: Starting a Qt4 app maximizes all minimized applications Classification: openSUSE Product: openSUSE 11.0 Version: Final Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: anshulajain(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.8) Gecko/2009032600 SUSE/3.0.8-1.1 Firefox/3.0.8 Running Opensuse 11.0 KDE 4.2.1 release 106 on my Thinkpad R61. When I start a Qt4- KDE4 application, for example Konsole...and I have FF3, Kmail and Amarok minimized in the task bar, all of the applications maximize themselves. This happens for Qt4 applications only. If I do the same with any GTK app, it doesn't happen. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 490844] New: Build Service Request
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=490844 Summary: Build Service Request Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: aaron.toponce(a)gmail.com QAContact: adrian(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.8) Gecko/2009032711 Ubuntu/8.10 (intrepid) Firefox/3.0.8 I would like to create a project for the Prosody XMPP server on your build service. The web page is found at http://prosody.im. The developer has the ability to create a 32-bit .deb of his source, but no RPMs, DEBs or other packages for 32-bit and other architectures. I am working with him to make sure we can reach the largest target audience. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 490735] New: Network outside the LAN becomes unreachable when two network interfaces are present
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=490735 Summary: Network outside the LAN becomes unreachable when two network interfaces are present Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: cesasanchezb(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); es-ES; rv:1.9.0.8) Gecko/2009032608 Firefox/3.0.8 When two network interfaces are present in the computer, after some hours it's impossible to access a network outside the LAN, and cannot be accedded from Internet. So, from Internet, I have to connect to a computer in the same LAN of the computer with two network interfaces, and connect to it using SSH. I login as root and restart the network service. After that, the computer is reachable again from Internet. I have configured both network interfaces with static IP addresses. Reproducible: Always Steps to Reproduce: 1. Configure static IP addresses in two network interfaces in the same LAN and the same computer. (One IP address must be visible from Internet) 2. Wait some hours, or maybe one day. 3. Try to connect to the Internet, or from the Internet to the host. Actual Results: There is not connection to Internet Expected Results: The connection should not be interrupted Also with opensuse 11.0 With computers with suse 10.2 that also have 2 network interfaces with static addresses and one of them visible from Internet, I do not have the same problem. To "solve" the problem, I deleted one of the network interfaces from the configuration in the Yast Network module. So, I have to use it without one of the network interfaces. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 478513] New: iwconfig wlanX nick command breaks ifup
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=478513 Summary: iwconfig wlanX nick command breaks ifup Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: All OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: Larry.Finger(a)lwfinger.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.0.6) Gecko/2009012700 SUSE/3.0.6-0.1.2 Firefox/3.0.6 With the development of cfg80211 and its replacement of the old wireless extension implementation, the command "iwconfig wlanX nick blah-blah" is no longer implemented; however the following scripts still use it: /etc/sysconfig/network/scripts/ifdown-wireless /etc/sysconfig/network/scripts/ifup-wireless /etc/sysconfig/network/scripts/ifstatus-wireless When the /sbin/ifup wlan0 command is given, it returns the following command 'iwconfig wlan0 nick <host-name>' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported. interface wlan0 is not up The fix is to remove the line "nick $WIRELESS_NICK" from the 3 scripts indicated above. Reproducible: Always Steps to Reproduce: 1. Configure the use of if-up for network devices. 2. Issue an ifup wlan0 command. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 484736] New: Yast does not save "forwarders" parameter in DNS setup
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=484736 Summary: Yast does not save "forwarders" parameter in DNS setup Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: akontsevich(a)gmail.com QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; ru; rv:1.9.0.6) Gecko/2009012700 SUSE/3.0.6-0.1.2 Firefox/3.0.6 Yast does not save "forwarders" parameter to /etc/named.conf in "DNS Server" setup. During settings saving Yast prints error that the parameter is missed and server could not be started. Forced to add the parameter manually to the file and restart the server manually from command line. Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 33

[Bug 482507] New: yast2: can't `update' to downgraded packages in one run after removal of a package repository
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=482507 Summary: yast2: can't `update' to downgraded packages in one run after removal of a package repository Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i586 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: wl(a)gnu.org QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.0.7) Gecko/2009022800 SUSE/3.0.7-1.2 Firefox/3.0.7 Recently I used the openSuSE X11 package repository to upgrade to the latest X11 stuff. However, it didn't work with my graphics card (due to severe bugs). I removed the X11 package repository and tried to downgrade. While this works manually on a per-package basis, it doesn't work if I display all installed packages, then selecting `update all packages in list if newer version is available'. This looks like a bug. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 490806] New: kernel update (-> 2.6.27.21-8.1) fails @ "nothing provides module-init-tools_fix_bnc480524"
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=490806 User pgnet.trash(a)gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=490806#c480524 Summary: kernel update (-> 2.6.27.21-8.1) fails @ "nothing provides module-init-tools_fix_bnc480524" Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: BuildService AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pgnet.trash(a)gmail.com QAContact: adrian(a)novell.com Found By: Customer running, uname -ri 2.6.27.21-7-xen x86_64 @ kernel-default update, zypper up kernel-default ... Problem: nothing provides module-init-tools_fix_bnc480524 needed by kernel-default-2.6.27.21-8.1.i586 Solution 1: do not ask to install a solvable providing kernel-default > 2.6.27.21-7.1 note: the arch change, i586 vs x86_64 reading @ kernel-* changelog, * Mon Mar 30 2009 mmarek(a)suse.cz - rpm/kernel-binary.spec.in: require a m-i-t package that fixes bnc#480524 @ attempt to read bnc#480524 & retrieve any patch, unfortunately, "You are not authorized to access bug #480524" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 491075] New: Knetworkmanager does not realy connect.
by bugzilla_noreply＠novell.com 01 Apr '09

01 Apr '09

https://bugzilla.novell.com/show_bug.cgi?id=491075 Summary: Knetworkmanager does not realy connect. Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: 32bit OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: monkey9(a)iae.nl QAContact: qa(a)suse.de Found By: Beta-Customer OS: Linux 2.6.27.19-3.2-pae i686 Huidige gebruiker: oddball@EEEPC-901-ROB Systeem: openSUSE 11.1 (i586) KDE: 4.2.1 (KDE 4.2.1) "release 106" When booting, or rebooting, the nm does not realy connect, in this way that only a few stripes are visible (wifi), and mail and webpages can not load. I have to edit settings, and save & connect, before it works. This means, that i can use only kde, because if i use icewm, there is no connection. I wanted to upgrade some packages when i noticed there was no connection. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0