December 2009 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 540482] New: Restart fails to restart computer
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=540482 Summary: Restart fails to restart computer Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: i386 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: tbullock(a)comlore.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.3) Gecko/20090909 SUSE/3.5.3-1.1 Firefox/3.5.3 Running factory update from earlier today (Sept 18), however this has been a problem for the last couple of months (say around Milestone 4) and has been persistent across fresh installs. Clicking "Computer -> Shutdown -> Restart", only restarts the gnome desktop rather than restarting the computer. Note that this also applies to the equivalent command of "Shutdown". Generally speaking the second or third attempt to "restart" will actually restart the computer. Running "shutdown -r now" from the commandline as root works all the time, so I imagine that there is some sort of problem higher up in the stack. This is why I filed this problem against "GNOME". I haven't got a clue as which log I should be posting, so please let me know. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 168

[Bug 540363] New: /etc/init.d/boot.crypto fails to mount device when keyfile is specified
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=540363 Summary: /etc/init.d/boot.crypto fails to mount device when keyfile is specified Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jacob.hart+opensuse(a)gmail.com QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-3.4 Firefox/3.5.2 Example /etc/crypttab # name device key options crypt-tmp /dev/sdb1 /root/crypt-tmp.key luks elantris:~ # ls -al /root/crypt-tmp.key -rw-r--r-- 1 root root 256 2009-09-19 02:39 /root/crypt-tmp.key elantris:~ # /etc/init.d/boot.crypto start /dev/sdb1 /lib/cryptsetup/boot.crypto.functions: line 623: -e: command not found crypt-tmp: /root/crypt-tmp.key does not exist skipped It's a one-line fix: just add "test" before "-e" on line 623 and everything's fine. Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 540033] New: gnome-do-plugins has broken Provides
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=540033 Summary: gnome-do-plugins has broken Provides Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: dominique.leuenberger(a)tmf-group.com ReportedBy: sshaw(a)decriptor.com QAContact: qa(a)suse.de Found By: --- gnome-do provides an engtrie list of Mono(*) which are bogus -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 540017] New: wrong xargs arguments in /usr/lib/secchk/security-weekly.sh (package seccheck)
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=540017 Summary: wrong xargs arguments in /usr/lib/secchk/security-weekly.sh (package seccheck) Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: wefing(a)gmx.de QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1.2 Firefox/3.0.13 /usr/lib/secchk/security-weekly.sh from the seccheck package contains 3 invalid invocations of the xargs command: .. xargs ls -cdl --time-style=long-iso --no_run-if-empty -- ... The correct version reads .. xargs --no_run-if-empty ls -cdl --time-style=long-iso -- ... kato tmp/graphics_test> rpm -qi seccheck Name : seccheck Relocations: (not relocatable) Version : 2.0 Vendor: openSUSE Release : 656.10.1 Build Date: Mi 14 Jan 2009 16:41:22 CET Install Date: Do 15 Jan 2009 22:15:29 CET Build Host: judah Group : Productivity/Security Source RPM: seccheck-2.0-656.10.1.src.rpm Size : 53004 License: GPL v2 or later Signature : RSA/8, Mi 14 Jan 2009 16:41:27 CET, Key ID b88b2fd43dbdc284 Packager : http://bugs.opensuse.org Summary : Security-Check Scripts Description : Regularly executable scripts (via cron) for checking the security of your system. Distribution: openSUSE 11.1 Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 540013] New: bash completions lack support for evince
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=540013 Summary: bash completions lack support for evince Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: All OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: ro(a)novell.com ReportedBy: gp(a)novell.com QAContact: qa(a)suse.de Found By: Product Management Created an attachment (id=318751) --> (http://bugzilla.novell.com/attachment.cgi?id=318751) Suggested fix How to reproduce: Having files name x and x.pdf in the local directory, typing "evince x" followed by tab in a bash shell does not expand to x.pdf How to fix: Apply the patch attached. ;-) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 539669] New: wireless initscripts wants iw tool, but not depends on it
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539669 Summary: wireless initscripts wants iw tool, but not depends on it Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: moje(a)kalhotky.net QAContact: qa(a)suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; cs-CZ; rv:1.9.1.2) Gecko/20090730 SUSE/3.5.2-3.5 Firefox/3.5.2 script /etc/sysconfig/network/scripts/ifup-wireless tests if iw command exists (test is at line 185) and refuse to enable wireless interface if iw not found. Sysconfig package (where mentioned script belongs to) don't depend on iw package. This cause not working wireless interface after upgrade. Reproducible: Always Steps to Reproduce: 1. upgrade from milestone6 to current factory 2. reboot 3. try rcnetwork restart Actual Results: Setting up network interfaces: eth0 device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) eth0 IP address: 192.168.172.1/24 eth0 done wlan0 name: ASUSTeK BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller cannot find 'iw', please install wlan0 done Setting up service network . . . . . . . . . . Expected Results: Setting up network interfaces: eth0 device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) eth0 IP address: 192.168.172.1/24 eth0 done wlan0 name: ASUSTeK BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller wlan0 starting wpa_supplicant wlan0 Starting DHCP4 client. . wlan0 IP address: 172.16.42.42/24 (moje) wlan0 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 539521] New: installer shows wrong partition size while formatting swap partition
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539521 Summary: installer shows wrong partition size while formatting swap partition Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: x86 OS/Version: SuSE Other Status: NEW Severity: Minor Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: patz1983(a)googlemail.com QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux i686; de; rv:1.9.0.13) Gecko/2009080200 SUSE/3.0.13-0.1 Firefox/3.0.13 i was installing opensuse 11.2 milestone 7. the hdd i used was a western digital wd600ab-32cza0 . the drive is pata and 60GB in size (55.7 if you do your maths correct). the drive contained a single ext3 partition before the installation. i didn't alter the partition setup suggestet by the installer. when the installer did the formatting of the swap partition, the screen output read something like: formatting swap partition (55.7 GB) the size of the swap partition is <2GB (don't remember the exact size) and it is apparently formatted correctly. the size of root and home partition were displayed correctly. its not really a major bug, but might be a bit scary if you have other partitions on the drive and don't know if your data is gone. Reproducible: Didn't try Steps to Reproduce: 1. 2. 3. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 42

[Bug 539401] New: cups fails to start
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539401 Summary: cups fails to start Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Printing AssignedTo: jsmeix(a)novell.com ReportedBy: estellnb(a)gmail.com QAContact: jsmeix(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/3.5; Linux) KHTML/3.5.10 (like Gecko) SUSE Trying to configure my printer YaST says cups is not running - and it really isn`t: lpstat -h localhost -r lpstat: Verbindung zum Server nicht möglich localhost:631 - no response > cups status Checking for cupsd: unused > cups start Starting cupsdcupsd: Child exited with status 13! startproc: exit status of parent of /usr/sbin/cupsd: 2 Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 25

[Bug 539275] New: Slideshow talks about 11.1
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539275 Summary: Slideshow talks about 11.1 Classification: openSUSE Product: openSUSE 11.2 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: binner(a)kde.org QAContact: jsrain(a)novell.com Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.1 (like Gecko) SUSE The slideshow during installation talks about openSUSE 11.1, slideshow.pot doesn't seem to be updated either. Reproducible: Always -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 539243] New: MySQL changes
by bugzilla_noreply＠novell.com 15 Apr '16

15 Apr '16

http://bugzilla.novell.com/show_bug.cgi?id=539243 Summary: MySQL changes Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 7 Platform: Other OS/Version: All Status: NEW Severity: Normal Priority: P5 - None Component: Release Notes AssignedTo: ke(a)novell.com ReportedBy: suse-beta(a)cboltz.de QAContact: coolo(a)novell.com CC: mhrusecky(a)novell.com Found By: Beta-Customer Bug 539148 pointed out one of several important changes in MySQL. Basically the whole file /usr/share/doc/packages/mysql/README.SuSE should be copied to the release notes. I'll paste it here for reference and include some comments with recommended text changes marked with ### Note: Even if Michal adds a %post script to remove skip-federated, I'd keep the paragraph about it in the release notes. Notes about MySQL 5.1 package: ============================== With MySQL 5.1 package we introduced some changes you may like to know. Most of them will affect you only if you are upgrading from previous version and you did some changes to your configuration, but I'll try to explain most notable changes. ### ", but I'll [...] notable changes" should be deleted 1) Plugins: =========== One of the new features in MySQL 5.1 is support for plugins. So some of the storage engines are now shipped like that. You can use following plugins: - archive - blackhole - federated - example ### "As you see," should be seleted As you see, InnoDB is still compiled as internal part of MySQL. If you are upgrading from version 5.0 or if this is your first installation of MySQL 5.1, all plugins will be enabled by default and you can disable them manually later (see http://dev.mysql.com/doc/refman/5.1/en/uninstall-plugin.html) With this change you need to remove skip-federated option from your my.cnf file if you have changed it manually. This option was there by default in previous versions of MySQL. 2) File locations: ================== There were some changes in files locations. Most of them was made in default ### _were_ made in _the_ configuration file so if you are experiencing problems and you have made some manual adjustments to your /etc/my.cnf, try to merge this file with /etc/my.cnf.rpmnew. First of them is that MySQL socket file and pid file were moved from /var/lib/mysql to more reasonable location ( /var/run/mysql ) by default. Second change is that MySQL log files are in /var/log/mysql. ### make this paragraph a bullet list: ### - MySQL socket file and pid file were moved from /var/lib/mysql to more ### reasonable location ( /var/run/mysql ) by default ### - MySQL log files are in /var/log/mysql 3) BerkeleyDB: ============== Other important change is that MySQL no longer contains BerkeleyDB as storage ### Remove "Other important change is that" engine. There is no fix for that and if you used it before, you have to migrate your data to different storage engine BEFORE updating. This can be done for example using following command: ALTER TABLE foo ENGINE = INNODB; 4) MySQL Upgrade Log ==================== Last thing you may find useful is that if you missed messages displayed during ### Delete "Last thing ... useful is that" automatic MySQL database upgrade, you can find them from now on in /var/log/mysql/mysql_upgrade.log -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15