May 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 386755] New: Sound support very poor on Dell Latitude D630
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=386755 Summary: Sound support very poor on Dell Latitude D630 Product: openSUSE 11.0 Version: Beta 1 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: msvec(a)novell.com QAContact: qa(a)suse.de Found By: --- On 10.3 there are only two playback channels available, PCM and Front, out of which only Front (main volume) is functional, PCM does not have any effect. On 11.0-beta1 it does not produce any sound at all. I'll try beta2 tomorrow, if it's any different. bash# hwinfo --sound 18: PCI 1b.0: 0403 Audio device [Created at pci.302] UDI: /org/freedesktop/Hal/devices/pci_8086_284b Unique ID: u1Nb.X0kmXxRCjd7 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Dell Latitude D630" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x284b "82801H (ICH8 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01f9 "Dell Latitude D630" Revision: 0x03 Driver: "HDA Intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfebdc000-0xfebdffff (rw,non-prefetchable) IRQ: 21 (77239 events) Module Alias: "pci:v00008086d0000284Bsv00001028sd000001F9bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=no, avail=yes, need=no, active=unknown -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 387245] New: zypper ref fail
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=387245 Summary: zypper ref fail Product: openSUSE 11.0 Version: Factory Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: zypp-maintainers(a)forge.provo.novell.com ReportedBy: hfiguiere(a)novell.com QAContact: dmacvicar(a)novell.com Found By: --- when doing a zypper ref it fail with the following: zypper> ref Repository 'openSUSE-FACTORY 11.0' is up to date. Building repository 'openSUSE-FACTORY 11.0' cache [done] Error building the cache database: repo2solv.sh "/var/cache/zypp/raw/openSUSE-FACTORY 11.0" > "/var/cache/zypp/solv/openSUSE-FACTORY 11.0/solv" Bad dependency line: =Prq: # Skipping repository 'openSUSE-FACTORY 11.0' because of the above error. Repository 'home:hfiguiere' is up to date. Some of the repositories have not been refreshed because of an error. zypper> libzypp-4.16.0-5 zypper-0.11.1-3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 385885] New: boot.iso check installation media not performed
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=385885 Summary: boot.iso check installation media not performed Product: openSUSE 11.0 Version: Factory Platform: x86 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: casualprogrammer(a)yahoo.com QAContact: jsrain(a)novell.com Found By: Beta-Customer While testing http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/boot/b… dated 01-May-2008 19:27 it appears, that the check installation media is not performed and installation started instead. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 253635] New: ntp patch broken/md5 keys unusable
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=253635 Summary: ntp patch broken/md5 keys unusable Product: openSUSE 10.3 Version: Alpha 1plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: mskibbe(a)novell.com ReportedBy: bj(a)sernet.de QAContact: qa(a)suse.de ntp keys no longer work and you get this message in syslog from ntpd since the W32Time patch is in: format/parity error for MD5 key 1, not used to reproduce, the ntp.keys file can be as simple as this: 1 M topsecret -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 20

[Bug 385944] New: change printer model window size
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=385944 Summary: change printer model window size Product: openSUSE 11.0 Version: Beta 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mschmidkunz(a)novell.com QAContact: jsrain(a)novell.com Found By: --- Manufacturer and model in the "change printer model" pop up are displayed very small and the popup does not stick to the dialog. I don't know whether it is a YaST or a KDE4 bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 387229] New: yast2-printer: tiny "Change Model" sub-dialog
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=387229 Summary: yast2-printer: tiny "Change Model" sub-dialog Product: openSUSE 11.0 Version: Beta 2 Platform: All OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: mzugec(a)novell.com ReportedBy: jsmeix(a)novell.com QAContact: jsrain(a)novell.com CC: fs(a)novell.com, mschmidkunz(a)novell.com Found By: Development In yast2-printer in the "Basic Settings" tab under "Chnage Model" the popup sub-dialog is much too small. I run a 11.0 beta2 with KDE4 installation. I don't know if this is a bug in yast2-printer or in the underlying YaST base or Qt stuff. Resizing it does not help much because only the left selection boc with the manufactureres increases. The right selection box with the models is still too small. Also resizing does not help becauise after one selection it shrinks to its initial tiny size (I guess because it is redrawn in its initial tiny size). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 386593] New: kiwi: oemboot allow repartition of disks smaller than 10GB
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=386593 Summary: kiwi: oemboot allow repartition of disks smaller than 10GB Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: System Imaging AssignedTo: ms(a)novell.com ReportedBy: ms(a)novell.com QAContact: adrian(a)novell.com Found By: --- if oemboot is used for USB sticks they don't get repartitioned because the disk appears as too small. This restriction should be removed to better use oemboot on USB sticks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 377034] New: Kiwi limited number of blocks to 32768 instead of correct 65535 blocks
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=377034 User postadal(a)novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=377034#c377005 Summary: Kiwi limited number of blocks to 32768 instead of correct 65535 blocks Product: openSUSE.org Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: System Imaging AssignedTo: ms(a)novell.com ReportedBy: postadal(a)novell.com QAContact: adrian(a)novell.com CC: pnemec(a)novell.com, psladek(a)novell.com Found By: --- validateBlockSize code use IMHO wrong check of the maximum number of blocks see RFC1350. The correct value should be 65535. (after fixing atftp bug #377005 we could support file >2G <4G). function validateBlockSize { # /.../ # check the block size value. atftp limits to a maximum of # 32768 blocks, so the block size must be checked according # to the size of the image # ---- isize=`expr $blocks \* $blocksize` isize=`expr $isize / 32768` if [ $isize -gt $imageBlkSize ];then imageBlkSize=`expr $isize + 1024` fi } IMHO I don't see 32768 limit of maximum number of blocks in atftp. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 326744] New: gnome-screensaver does not unlock with fingerprint ( Test Case 388118 - [300416] Test Feature: Biometrical Authentification ( BioAPI, PAM, Fingersensor))
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=326744 Summary: gnome-screensaver does not unlock with fingerprint (Test Case 388118 - [300416] Test Feature: Biometrical Authentification (BioAPI, PAM, Fingersensor)) Product: openSUSE 10.3 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: seife(a)novell.com QAContact: qa(a)suse.de CC: thoenig(a)novell.com Found By: Component Test I installed a fresh 10.3RC1. I added a second user that authenticates with fingerprint. Since KDE did not work at all, i added gdm and gnome-screensaver. I can log in to gdm with swiping the finger quite fine, gnomesu also works. Gnome-screensaver does not unlock, though. Since this is a 10.3-feature => high severity. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 24

[Bug 386717] New: Repositorium?
by bugzilla_noreply＠novell.com 06 May '08

06 May '08

https://bugzilla.novell.com/show_bug.cgi?id=386717 Summary: Repositorium? Product: openSUSE 11.0 Version: Beta 2 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Translations AssignedTo: ke(a)novell.com ReportedBy: snwint(a)novell.com QAContact: ke(a)novell.com Found By: --- Are you sure that 'Repositorium' is a sensible german translation of 'repository'? It has quite an avantgardistic touch to me. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14