March 2008 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 370900] New: Screen saver does not start
by bugzilla_noreply＠novell.com 21 Nov '08

21 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=370900 Summary: Screen saver does not start Product: openSUSE 11.0 Version: Alpha 2plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers(a)suse.de ReportedBy: jdluhos(a)novell.com QAContact: qa(a)suse.de Found By: --- It seems that the screen saver does not start in KDE4; it works in testing mode when invoked from the control panel, but it does not kick in after the specified time of inactivity. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 309522] New: pm-utils shouldn't sabotage suspend-to-file
by bugzilla_noreply＠novell.com 21 Nov '08

21 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=309522 Summary: pm-utils shouldn't sabotage suspend-to-file Product: openSUSE 10.3 Version: Beta 3 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: pbaudis(a)novell.com QAContact: qa(a)suse.de Found By: --- I use swap to file + suspend to disk. I realize that this isn't quite supported on OpenSUSE, still I think the scripts shouldn't sabotage this by their sanity checks. :-) In /usr/lib/pm-utils/sleep.d/30s2disk-check, the check if [ -z "$DEV" ]; then echo "ERROR: resume partition '$RESUME' not active, can not suspend" echo "resume partition '$RESUME' not active" >> $INHIBIT return 1 fi fails if swap to file is used. I'm attaching a quick patch to fix the script. In the course of fixing this, I've hit another bug, HIBERNATE does not equal HIBERNATE_METHOD if the latter is set in /usr/pm-utils/defaults - that is probably not the right place where to set it, OTOH when I set HIBERNATE in /etc/pm/conf.d/, that didn't appear to have an effect; in retrospect, I should've set both HIBERNATE and HIBERNATE_METHOD in /etc/pm/config.d, but that's a bug too - both scripts should use the same environment variable. Currently, the configuration looks a bit messy anyway, only when writing this I've noticed that filenames actually matter in the /etc/pm/config.d directory... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 310508] New: g-p-m: reporting wrong ETA when running on battery
by bugzilla_noreply＠novell.com 21 Nov '08

21 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=310508 Summary: g-p-m: reporting wrong ETA when running on battery Product: openSUSE 10.3 Version: Beta 3 Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: thoenig(a)novell.com QAContact: qa(a)suse.de Found By: --- g-p-m: reporting wrong ETA when running on battery While the notification (g-p-m, then click on the battery) reports the correct ETA, the tooltip is reporting a completely misleading ETA. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 31

[Bug 364054] New: Banshee should be the default media player in the control center
by bugzilla_noreply＠novell.com 21 Nov '08

21 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=364054 Summary: Banshee should be the default media player in the control center Product: openSUSE 11.0 Version: Alpha 2 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: rodrigo(a)novell.com ReportedBy: jpr(a)novell.com QAContact: qa(a)suse.de Found By: --- Banshee should be the default media player in the control center preferred applications capplet -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 11

[Bug 375088] New: Banshee makes notification-daemon warn about laptop lid
by bugzilla_noreply＠novell.com 21 Nov '08

21 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=375088 Summary: Banshee makes notification-daemon warn about laptop lid Product: openSUSE 11.0 Version: Alpha 3 Platform: i586 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: federico(a)novell.com QAContact: qa(a)suse.de Found By: Development Every time Banshee changes to the next song, the notification daemon warns me that my laptop won't unsuspend when I close the lid, as some program has prevented this. The notification has a "Don't show me this again", but that's not good enough. I *want* to know if some stupid program inhibits suspend. Banshee should only send that notification once, maybe on the first song that plays after unsuspending. Or even better, it should respect my wish to suspend the laptop by closing the lid and shut itself up :) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 5

[Bug 343412] New: CDs written by k3b at high writing speeds cannot be read.
by bugzilla_noreply＠novell.com 20 Nov '08

20 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=343412 Summary: CDs written by k3b at high writing speeds cannot be read. Product: openSUSE 10.3 Version: Final Platform: 32bit OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: nice(a)titanic.nyme.hu QAContact: qa(a)suse.de Found By: Other I experienced that when I burn a CD at higher speeds (i.e. above 4x) then it cannot be read. I had to dispose of some CDs when I was trying to burn the openSUSE 10.3 network setup CDs, until I learned that CDs written at 4x speed can be read. DVD burning always seemed to be OK. K3B reporst my DVD drive to be "TSSTcorp CD/DVDW TS-L632D". The machine is HP Compaq nc6320. Today I attempted to reproduce this symptom but I didn't succed. I wrote a CD at max speed (12x) and I could read it afterwards. Was it a known bug and has been fixed? Anyway the data tracks on a CD written under Linux seem to be dimmer than than on CDs written under Windows on a very similar machine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 12

[Bug 347167] New: yast printer module only refers to hostnames, neglects IP addresses
by bugzilla_noreply＠novell.com 20 Nov '08

20 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=347167 Summary: yast printer module only refers to hostnames, neglects IP addresses Product: openSUSE 10.3 Version: Final Platform: i386 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: gp(a)novell.com QAContact: jsrain(a)novell.com Found By: Product Management As the attached screenshot will show, the YaST printer module accepts both hostnames and IP addresses to refer to a network printer, but the YaST module actually supports both. This needs to be fixed both in the dialog itself and in the help text, also the manual should be checked. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 365178] New: yast2 sudoers will put line ALL ALL = (ALL) ALL wrong into /etc/sudoers
by bugzilla_noreply＠novell.com 20 Nov '08

20 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=365178 Summary: yast2 sudoers will put line ALL ALL = (ALL) ALL wrong into /etc/sudoers Product: openSUSE 10.3 Version: Final Platform: All OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fnmueller(a)opensuse.org QAContact: jsrain(a)novell.com Found By: Other When configuring /etc/sudoers via yast2 --> security --> sudo to not ask for root password upon a certain command it will put the "ALL ALL = (ALL) ALL" line in the wrong place, causing sudo still to ask for the root password. It is: marcel ALL = (%root) NOPASSWD: /etc/init.d/smb start,/sbin/shutdown -h +60 ALL ALL = (ALL) ALL It should be: ALL ALL = (ALL) ALL marcel ALL = (%root) NOPASSWD: /etc/init.d/smb start,/sbin/shutdown -h +60 Even worse, yast will change back the sudoers file to : marcel ALL = (%root) NOPASSWD: /etc/init.d/smb start,/sbin/shutdown -h +60 ALL ALL = (ALL) ALL when adding a new command. Even though I used visudo to force ALL ALL = (ALL) ALL to be the first line. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 369270] New: [TRACKING] openSUSE 11 Branding
by bugzilla_noreply＠novell.com 19 Nov '08

19 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=369270 Summary: [TRACKING] openSUSE 11 Branding Product: openSUSE 11.0 Version: Alpha 2plus Platform: Other OS/Version: Other Status: NEW Severity: Blocker Priority: P5 - None Component: Other AssignedTo: jimmac(a)novell.com ReportedBy: jimmac(a)novell.com QAContact: qa(a)suse.de Found By: --- This is to track the various components to completely brand (style) the openSUSE 11 distro. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 55

[Bug 368624] New: [TRACKING] Yast2 Installer Theming
by bugzilla_noreply＠novell.com 19 Nov '08

19 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=368624 Summary: [TRACKING] Yast2 Installer Theming Product: openSUSE 11.0 Version: Alpha 2plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: jimmac(a)novell.com ReportedBy: jimmac(a)novell.com QAContact: jsrain(a)novell.com CC: coolo(a)suse.de Found By: --- This is a tracking bug for all the theming issues with the installer. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 66