June 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 232768] New: yast2 grub config tool fails to configure/install grub for dmraid drives
by bugzilla_noreply＠novell.com 06 Nov '08

06 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=232768 Summary: yast2 grub config tool fails to configure/install grub for dmraid drives Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: djwong(a)us.ibm.com QAContact: jsrain(a)novell.com CC: lcm(a)us.ibm.com, rweight(a)us.ibm.com I have an IBM x346 with the Adaptec 7902B U320 SCSI controller and HostRAID in the SCSI BIOS. The system has two 36GB SCSI disks which I have configured as a RAID0; I am attempting to install OpenSUSE 10.2 onto the RAID0. During installation, the grub configuration tool in yast proposes that it install itself to an obviously bogus device: > setup --stage2=/boot/grub/stage2 (hd0) (/dev/mapper/asr_RAID,4) "(/dev/mapper/asr_RAID,4)" is not a grub device; the proper device name in this case is "(hd0,4)". The menu.lst file suffers a similar fate with things like this: > root (/dev/mapper/asr_RAID,4) Just prior to the first boot, the installer trips over the bad device names when it tries to install grub. I also noticed that the grub device map is suspiciously devoid of hdX entries: > (fd0) /dev/fd0 <EOF> It appears that these dmraid device file names are not being translated into grub's "(hdX..." syntax, nor is a device.map mapping set up. The end result is that grub fails to install. If I tell yast to put "(hd0) /dev/mapper/asr_RAID" into device.map, the menu.lst file fixes itself and grub installs fine. It appears that the key dependency is having that "(hd0) /dev/mapper/asr_RAID" line in device.map. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 32

[Bug 230918] New: Left handed mouse does not work with external USB mouse in KDE
by bugzilla_noreply＠novell.com 06 Nov '08

06 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=230918 Summary: Left handed mouse does not work with external USB mouse in KDE Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: felix.rommel(a)web.de QAContact: qa(a)suse.de I have an PS2 to USB converter from EzTec where I can plugin a PS2 mouse and keyboard. I have never had problems with it with any Linux distribution. But when I set left handed mouse in KDE control center the external PS2/USB mouse still is in right hand mode. My Synaptic touchpad switches to left handed mouse mode. How to reproce: 1. Plug in an external USB mouse (in my case an PS2 mouse with an USB converter) 2. Open KDE control center and set up your mouse to "left hand mode" As a result the Synaptic touchpad is in left hand mode but the external USB/PS2 mouse is still in right hand mode. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 27

[Bug 225221] New: Kernel module "INPUT_PCSPKR" not compiled as a module.
by bugzilla_noreply＠novell.com 06 Nov '08

06 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=225221 Summary: Kernel module "INPUT_PCSPKR" not compiled as a module. Product: openSUSE 10.2 Version: RC 1 Platform: All OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: sanne(a)email.it QAContact: qa(a)suse.de Since opensuse 10.2 is the kernel support for the PC-Speaker is built in the kernel, before it was installed as a module (symbol INPUT_PCSPKR). Having this as a module permitted us to blacklist it, as using a lot of laptops in the same office all those "beeps" where quite annoying. Now I have to rebuild my own kernel, losing automatic update features from the distro and much time. Please leave it as module (as before), or don't include it at all ;-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 18

[Bug 227504] New: Siemens M34 USB occasionally stops soundcard
by bugzilla_noreply＠novell.com 06 Nov '08

06 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=227504 Summary: Siemens M34 USB occasionally stops soundcard Product: openSUSE 10.2 Version: Final Platform: 32bit OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: Olaf.Amm(a)fmi.fi QAContact: qa(a)suse.de I use a Siemens M34 USB adapter for VoIP calls (unfortunately not supported by Linux, but my machine is a Windows/Linux dual boot), and a Soundblaster sound card. Usually, even though the M34 USB is not useable under Linux, things work fine and the sound card is working normally. However, every 5th login or so, apparently randomly SuSE Linux recognises that M34USB adapter as the "sound card", so the actual Soundblaster card is disabled, and sound doesn't work. I think SuSE should not assign an USB device that it cannot fully recognize as a sound card. - Is there any fix/workaround for this? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 9

[Bug 235287] New: YaST fails to configure USB scanner
by bugzilla_noreply＠novell.com 06 Nov '08

06 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=235287 Summary: YaST fails to configure USB scanner Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: psychonaut(a)nothingisreal.com QAContact: jsrain(a)novell.com Reproducibility: Always Hardware: HP ScanJet 5300C connected via USB Steps to reproduce: 1. Start YaST 2. Hardware->Scanner 3. "Scanner Configuration" dialog appears up with the following data: Driver Scanner -------------- ------- Not Configured USB scanner (vendor=0x03f0, product=0x0701) at libusb:002:022 net No scanner recognized by this driver 4. Select the USB scanner and click Edit 5. "Scanner Model and Driver Selection" dialog appears; "Hewlett-Packard ScanJet 5300C : Driver avision (package sane)..." is preselected. 6. Click Next 7. "Setting Up Driver avision" dialog appears. All six steps complete successfully. 8. Click Next 9. "Scanner Configuration" dialog appears up with the following data: Driver Scanner -------------- ------- Not Configured USB scanner (vendor=0x03f0, product=0x0701) at libusb:002:022 avision No scanner recognized by this driver net No scanner recognized by this driver Note that a new "avision" entry has been added, but it is not mapped to the detected scanner. The detected scanner still says "Not Configured". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 18

[Bug 245754] New: Mounting nfs4 with Kerberos at boot does work under OpenSuSE
by bugzilla_noreply＠novell.com 05 Nov '08

05 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=245754 Summary: Mounting nfs4 with Kerberos at boot does work under OpenSuSE Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: SLED 10 Status: NEW Severity: Blocker Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: schwabe(a)uni-paderborn.de QAContact: qa(a)suse.de Mounting nfs4 with sec=krb5 Exports does not work under openSuSE 10.2. For mounting nfs4 sec=krb5 you need gssd and idmapd running but the nfs skript does require gssd,idmapd. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 286759] New: boot.rootfsck remounts unneededly
by bugzilla_noreply＠novell.com 05 Nov '08

05 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=286759 Summary: boot.rootfsck remounts unneededly Product: openSUSE 10.3 Version: Alpha 5 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: ro(a)novell.com ReportedBy: coolo(a)novell.com QAContact: qa(a)suse.de CC: hare(a)novell.com, olh(a)novell.com Found By: --- boot.rootfsck remounts the / partion without any need to do so # remount in any case to apply additional options like xattr mount -n -o remount,rw / The / partion leaves the initrd mounted rw and with the correct options. And this very remount breaks fcache support as it ends and restarts priming. It should just go. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 238743] New: Lists in patch descriptions
by bugzilla_noreply＠novell.com 05 Nov '08

05 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=238743 Summary: Lists in patch descriptions Product: openSUSE 10.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: msvec(a)novell.com QAContact: jsrain(a)novell.com It would be good if lists in patch descriptions are actually displayed as lists instead of compound together, like ATM: zypper online update to fix the following bugs: - search does not show installed packages (bug #224673) - error message when trying to install an already installed package (bug #224129) - inappropriate error message if package integrity check fails (bug #224216) - missing notification if no update sources are configured (#226067) - zypper patches shows duplicates from different sources (#223844) - show a comprehensive message when another instance of ZYPP is running when zypper is being started (#227073) - fixed to be compatible even with krpmview in cases of errors (#223795) Or we should use normal sentences in the description (although lists are nicer for overview and thus preferable). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 5

[Bug 214956] New: online update still fails with timeout V 2.13.43.2-0.2
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=214956 Summary: online update still fails with timeout V 2.13.43.2-0.2 Product: SUSE Linux 10.1 Version: Final Platform: i386 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Critical Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alpha096(a)tpg.com.au QAContact: jsrain(a)novell.com V 2.13.43.2-0.2 of on line update still fails with timeout - see screen shot. Please amend ZMD time out parameter. This may be dupe - Hard to tell with different versions and many fixes have been attempted -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 213233] New: On-line Update - fails in resole dependencies and unable to install new updates indicated by ZEN updates
by bugzilla_noreply＠novell.com 04 Nov '08

04 Nov '08

https://bugzilla.novell.com/show_bug.cgi?id=213233 Summary: On-line Update - fails in resole dependencies and unable to install new updates indicated by ZEN updates Product: SUSE Linux 10.1 Version: Final Platform: i386 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Major Priority: P5 - None Component: Update Problems AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alpha096(a)tpg.com.au QAContact: jsrain(a)novell.com I Noticed and ZEN online update just released has caused a problem. The recent online distribution in 4 New updates updated YAST2 online update. YAST updates and displayed YAST will close and restart after that process ZMD still indicates the are updates, however there cannot be installed by On-line update. The following message from root indices problems with On-line update version couston@scott:~> su Password: scott:/home/couston # rpm -q libzypp zen-updater libzypp-1.3.2-0.9 zen-updater-7.1.0-51.30 scott:/home/couston # root email indicates Waking up ZMD...Done The following updates are required: Resolving Dependencies... ERROR: Dependency resolution failed: Unresolved dependencies: Updating patch:libzypp-logging-2158-0.noarch[System packages] to patch:libzypp-logging-2158-0.noarch[20061011-181226] Can't install patch:libzypp-logging-2158-0.noarch[20061011-115300], since patch:libzypp-logging-2158-0.noarch[20061011-181226] is already marked as needing to be installed Marking this resolution attempt as invalid. Current display indicates updates are available, however this new version of YAST online update goes black when ZMD indicates updates are required. We have to get On-line update finally fixed be have has the following versions as We need either to roll-back current version of YOU or correct it again. Please do not release v 10.2 until YOU is finally fixed and will not cause errors as without it this functioning correctly we can can fit nothing. This problem may well have been resolved or rolled-back as of today? New On-line Update - fails in resole dependencies and unable to install new updates indicated by ZEN updates -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4