December 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 343901] New: Installation witch ISCSI fails
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=343901 Summary: Installation witch ISCSI fails Product: openSUSE 10.3 Version: Final Platform: i386 OS/Version: Other Status: NEW Severity: Blocker Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: joachimt(a)muenster.de QAContact: jsrain(a)novell.com Found By: Customer Hi, I have tried to install an opensuse 10.3 on an ISCSI Disk. I have downloaded the opensuse-10.3-mini-CD. On a normal i386 PC I have booted from the CD und startet a Manual Setup, First I loaded the TCP-SCSI Module, which was fine. Then I startet a Network Installation via http which was ok too. Unfortunenatly in the Partinoning part of yast my iscsi target was not recognized. The reason was that the iscsid was not running. So I started the daemon from another console. After that I could see my target. Then I created a boot partition on my local disk, so I am able to boot ( having in mind to boot via pxe afterwards the basic installation has completed) and the root partition on ISCSI Disk. The basic installation of the rpm Packages worked fine until the first boot. The kernel und initrd were loaded from my boot device on the local disk but the init Skript invoking the S12-ICSI,sh Skript was not able to see my ISCSI Target. The output was: Starting SCSI Daemon iscsiadm: No records found The init Skript was waiting for the root Partition, obivously a hotplug device, /dev/disk-by-id/ISCSI.......... to apear. At the end a bash did start. with iscsiadm -m discovery -t st -p 192.168.1.125:3260 I could see my ISCSI Target. So I think maybe there is something wrong in the initrd Script, perhaps in the timing. (I have seen a static usleep after starting the iscsi daemon) Best regards Joachim Tork -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 2

[Bug 346165] New: Switching between tree items in Qt Wizard does not work
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=346165 Summary: Switching between tree items in Qt Wizard does not work Product: openSUSE 11.0 Version: unspecified Platform: Other OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: sh(a)novell.com ReportedBy: kmachalkova(a)novell.com QAContact: jsrain(a)novell.com Found By: --- Clicking on any tree item in the left panel in Qt Wizard has no effect. The very first configuration screen remains in the right panel. It works reasonably well in ncurses. How to reproduce - run any module using tree structure in the left panel (firewall, dhcp-server, sudo, autoyast, ...) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 1

[Bug 289983] New: gv 3.5.8-1184. 2 does not honor the -fn option for use of different fonts anymore
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=289983 Summary: gv 3.5.8-1184.2 does not honor the -fn option for use of different fonts anymore Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: X11 Applications AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: mack(a)ifis.cs.tu-bs.de QAContact: sndirsch(a)novell.com Found By: Customer The fonts used in gv menues etc. can no longer be set via the -fn option, e.g.: gv -fn '-*-lucida-bold-r-*-*-*-120-*-*-p-*-iso8859-1' should result in noticeable difference to gv -fn '-*-lucida-bold-r-*-*-*-180-*-*-p-*-iso8859-1' in the appearance of gv. This worked without problems with gv-3.5.8-961 of SuSE-9.2. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 18

[Bug 299598] New: Ralink rt2570 detected but unable to get a connection
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=299598 Summary: Ralink rt2570 detected but unable to get a connection Product: openSUSE 10.3 Version: Beta 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: alberto.passalacqua(a)tin.it QAContact: qa(a)suse.de Found By: --- My ralink rt2570 is properly identified in beta 1 by YaST, but it's unable to get a connection to the access point. It seems it doesn't detect the AP signal. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 345506] New: Core, Qt, GTK... New boolean "HasDimmImageSupport"
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=345506 Summary: Core, Qt, GTK... New boolean "HasDimmImageSupport" Product: openSUSE 11.0 Version: unspecified Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: sh(a)novell.com ReportedBy: locilka(a)novell.com QAContact: jsrain(a)novell.com CC: coolo(a)novell.com, tgoettlicher(a)novell.com Found By: --- Coolo has implemented a new Image functionality to Qt (3,4) to support Image-Dimming this support is still missing in $other UIs (and the future support is unclear) so I've prepared a patch for Core + Qt that adds another boolean to UI::GetDisplayInfo(); Would it be possible to add it there, please? (see the proposed patches) Anyway, if there was a better way, I'd like it too :))) This was the only method I was able to use. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13

[Bug 173441] KHelpCenter searchs not only in the page content, but also in the margens.
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=173441 User ke(a)novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=173441#c18 Karl Eichwalder <ke(a)novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |LATER --- Comment #18 from Karl Eichwalder <ke(a)novell.com> 2007-12-05 06:28:04 MST --- still waiting for bug 297572 ... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 162673] firefox cannot load huge image
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=162673 User wolfgang(a)rosenauer.org added comment https://bugzilla.novell.com/show_bug.cgi?id=162673#c10 --- Comment #10 from Wolfgang Rosenauer <wolfgang(a)rosenauer.org> 2007-12-05 06:23:59 MST --- FWIW, since roc was involved here I had expected that there is an upstream bugreport already but I wasn't able to find one. https://bugzilla.mozilla.org/show_bug.cgi?id=406966 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 162673] firefox cannot load huge image
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=162673 User jengelh(a)gmx.de added comment https://bugzilla.novell.com/show_bug.cgi?id=162673#c9 Jan Engelhardt <jengelh(a)gmx.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|Can't load image |firefox cannot load huge image --- Comment #9 from Jan Engelhardt <jengelh(a)gmx.de> 2007-12-05 06:18:28 MST --- It should show all RGB cube slices, of course projected into 2D. (Use something like "xv" to view the image.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 162673] Can't load image
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=162673 User wolfgang(a)rosenauer.org added comment https://bugzilla.novell.com/show_bug.cgi?id=162673#c8 Wolfgang Rosenauer <wolfgang(a)rosenauer.org> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |wolfgang(a)rosenauer.org --- Comment #8 from Wolfgang Rosenauer <wolfgang(a)rosenauer.org> 2007-12-05 06:11:27 MST --- Some test results: Firefox 3.0b1 on Linux is crashing with both testcases above. Firefox 2.0.0.11 on Windows displays something (don't know if it's the expected result) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 0

[Bug 345771] New: Discrepancy regarding file FaxDispatch in HylaFAX
by bugzilla_noreply＠novell.com 05 Dec '07

05 Dec '07

https://bugzilla.novell.com/show_bug.cgi?id=345771 Summary: Discrepancy regarding file FaxDispatch in HylaFAX Product: openSUSE 10.3 Version: Final Platform: Other OS/Version: SuSE Linux 10.0 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: robin.listas(a)telefonica.net QAContact: qa(a)suse.de Found By: --- (From a conversation we were having in the opensuse-es(a)opensuse.org mail list) The man page for hylafax "FAXRCVD(8C)" says: ] This script can route facsimile directly to the intended receipient. ] To do this create a shell script bin/FaxDispatch in the spooling area ] that sets SENDTO to the receiver's electronic mail address. For example, However, in <http://www.hylafax.org/man/4.4.0/faxrcvd.1m.html> it says: ] This script can route facsimile directly to the intended receipient. ] To do this create a shell script etc/FaxDispatch in the spooling area ] that sets SENDTO to the receiver’s electronic mail address. For example, Notice that the first one says "bin/FaxDispatch" and the second says "etc/FaxDispatch". Which one is correct? Investigating, I find that two scripts contains references to "FaxDispatch". One is "/var/spool/fax/bin/wedged", which imports "etc/FaxDispatch", and the other is ".../faxrcvd", which imports "bin/FaxDispatch". It may be that the man page is correct and the web page is not. Or it might be a confusion somewhere, because both "FaxDispatch" configuration files have similar purposes and the same name, which is quite confusing for the user. And for the user, having to edit a file in "bin/" which might be later overwritten by an upgrade, instead of doing so in "etc/" is also problematic and could be an usability issue. Which is why I classify this bugzilla as "other" initially, for you to decide ;-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8