October 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 223800] New: kmix does not set MasterMixerDevice automatically - global hotkeys not working
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=223800 Summary: kmix does not set MasterMixerDevice automatically - global hotkeys not working Product: openSUSE 10.2 Version: RC 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: robin.knapp(a)fujitsu-siemens.com QAContact: qa(a)suse.de kmix does not select the master channel automatically. Global hotkeys for master channel won't work until the master channel is set up manually by right clicking on the icon and selecting "Hauptkanal auswählen" ("select master channel" I think) In this dialogue, the master channel is already selected so just pressing ok does the job and global hotkeys for the master channel work. <snip> robin@linux:~/.kde/share/config> diff kmixrc.bad kmixrc.good 4a5 > MasterMixerDevice=0 </snip> (kmixrc.bad = before selecting master channel manually, kmixrc.good = after) However, somewhere I read that XF86RaiseVolume and XF86LowerVolume should be automatically bound to volume up/down in 10.2, but I still have to set global hotkeys for this. I'm not sure if this is intended. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 237565] New: kwrite (kate) stops opening
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=237565 Summary: kwrite (kate) stops opening Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: mvdv(a)spamcop.net QAContact: sndirsch(a)novell.com Hi, Following refers to openSUSE 10.2, std pacakges, updated. Opening plain text files using kwrite from within konqueror works for a while, then starts to complain (Sorry - Konqueror): KDEinit could not launch 'kwrite'. This can be fixed by a reboot, but then reoccurs. I've seen this behavior with both kate and kwrite. running (as root) from a bash shell: # kwrite /path/to/text.file & Does work for a few days longer. Then kwrite fails to launch from the command shell. I haven't persisted long enough with kate to see if it also fails from the bash shell. The shell error is: kwrite: cannot connect to X server :0 HTH -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 332729] New: adding users: ask about disabling autologin only for second user
by bugzilla_noreply＠novell.com 18 Feb '09

18 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=332729 Summary: adding users: ask about disabling autologin only for second user Product: openSUSE 10.3 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: bluedzins(a)wp.pl QAContact: jsrain(a)novell.com Found By: --- You have user A with autologin on, you have user B (login enabled). You are adding the third user -- C. What is the point at this moment (2 users defined already) if user A should have disabled autologin. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 4

[Bug 338119] New: Video driver for VIA chipset don't work
by bugzilla_noreply＠novell.com 16 Feb '09

16 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=338119 Summary: Video driver for VIA chipset don't work Product: openSUSE 10.3 Version: Final Platform: i586 OS/Version: openSUSE 10.3 Status: NEW Severity: Blocker Priority: P5 - None Component: X11 3rd Party Driver AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: fpws(a)hushmail.com QAContact: sndirsch(a)novell.com Found By: Customer My hardware is "VIA P4N800 PRO" - (reported by Yast HW info) or "01:00.0 ... UniChrome Pro IGP (rev 01)" - (reported by lspci). Laptop's BIOS report VN800. Xorg report "no device detected - no screen found" when I use "via" in xorg.conf. In previous 10.2 version, at least Openchrome driver worked. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 17

[Bug 262630] New: Incompatible video driver for VIA IGP
by bugzilla_noreply＠novell.com 16 Feb '09

16 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=262630 Summary: Incompatible video driver for VIA IGP Product: openSUSE 10.2 Version: Final Platform: i586 URL: http://www.viaarena.com/default.aspx?PageID=420&OSID=25& CatID=2580&SubCatID=182 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: sndirsch(a)novell.com ReportedBy: handsclark(a)gmail.com QAContact: sndirsch(a)novell.com When using K8M890 chipset (Chrome9 graphics), the graphics is not detected correctly, and video performance is abysmal (even in 2D). I suspect that a compatible video driver isn't even integrated into X.org. see... http://www.viaarena.com/default.aspx?PageID=420&OSID=25&CatID=2580&SubCatID… -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 16

[Bug 329635] New: Wrong icon for "Install Software" in main menu
by bugzilla_noreply＠novell.com 16 Feb '09

16 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=329635 Summary: Wrong icon for "Install Software" in main menu Product: openSUSE 10.3 Version: RC 1 Platform: Other OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: infernux(a)web.de QAContact: qa(a)suse.de Found By: Beta-Customer The icon for "Install Software" in the main menu uses the system-software-update icon, the icon meant for a software updater (such as the suse updater running in the tray, currently showing the suse logo). There is a better fitting icon: system-installer. While this seems to be a minor problam at first, please note that this could lead to usability problems, as people would expect to see the known system-installer icon when looking for a way to install new software. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 334229] New: evolution doesn't recognize headers from groupwise SOAP
by bugzilla_noreply＠novell.com 16 Feb '09

16 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=334229 Summary: evolution doesn't recognize headers from groupwise SOAP Product: openSUSE 10.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Evolution AssignedTo: bnc-team-evolution(a)forge.provo.novell.com ReportedBy: ajohansson(a)novell.com QAContact: lakhil(a)novell.com Found By: --- With the evolution shipping in 10.3, I can now finally see the email headers when using groupwise SOAP as backend. I can also filter on them, when I select to filter on a specified header However, evolution doesn't seem to realize that the headers are there. It doesn't see that mailing list mails come from a mailing list (I can manually specify to filter on "List-Id" or "X-Mailinglist", but right-click -> filter on mailing list is greyed out, and "Reply to list" also doesn't respond) It also doesn't seem to see the In-Reply-To or other headers, so threading still doesn't work -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 8

[Bug 247355] New: evolution-data-server - Ports for SuSEfirewall added via packages
by bugzilla_noreply＠novell.com 16 Feb '09

16 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=247355 Summary: evolution-data-server - Ports for SuSEfirewall added via packages Product: openSUSE 10.3 Version: Alpha 1 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: locilka(a)novell.com QAContact: qa(a)suse.de There is a new feature: FATE #300687: Ports for SuSEfirewall2 added via packages implemented in SuSEfirewall2 and YaST2-Firewall. This functionality offers to define needed ports for particular package. The definition is then transparently used in Firewall. Please, add such definition into the package mentioned in $subject by following steps in this article: http://en.opensuse.org/SuSEfirewall2/Service_Definitions_Added_via_Packages Thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6

[Bug 326848] New: system resumes from suspend with desktop unlocked
by bugzilla_noreply＠novell.com 15 Feb '09

15 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=326848 Summary: system resumes from suspend with desktop unlocked Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: openSUSE 10.2 Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: s.barylski(a)epmf.org QAContact: qa(a)suse.de Found By: Other Suspend to RAM/disk is a very usefull feature. I often use it to shut my Linux down in a flash. I can wake the system up easily and come back to my KDE desktop anytime. The problem is the system always resumes with the desktop unlocked. I can't make it ask me to input my password after waking up. I made sure the settings of KPowersave are ok (configure -> common settings -> screen lock). "Lock screen before suspend/hibernate" is marked on my openSUSE however the system doesn't lock the desktop before suspending. Besides, screen locking works smoothly. I also try to explicitely specify one lock method but in vain. I reported the bug to the KDE Bug Tracking System. They thought it was a general system bug rather then KDE one. http://bugs.kde.org/show_bug.cgi?id=149893 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 30

[Bug 305333] New: Bridge and bridge port ifup order
by bugzilla_noreply＠novell.com 13 Feb '09

13 Feb '09

https://bugzilla.novell.com/show_bug.cgi?id=305333 Summary: Bridge and bridge port ifup order Product: openSUSE 10.3 Version: Beta 2 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: jfunk(a)funktronics.ca QAContact: qa(a)suse.de Found By: --- I have a rather complex network setup, so I will just list the relevant parts: eth - Physical ethernet interface, connected to a vlan trunk vlan4 - VLAN 4, on eth dot23 - A bridge containing vlan4 and my default route It appears that the network init script brings up non-physical interfaces alphabetically, so it will bring these devices in the following order: eth dot23 vlan4 Since vlan4 doesn't exist when dot23 is brought up, it is never added to the bridge, and I have to manually add it or restart the bridge. One way to solve this, of course, is to make the init script bring up any interfaces listed in BRIDGE_PORTS before bringing up the bridge. Another way is to also define port membership in the port ifcfg files. This is actually something I have been doing for a long while now with a custom {ifup,ifdown}-bridgeport script in /etc/sysconfig/network/scripts, which I will attach. Basically, I use Qemu and OpenVPN quite a bit, and I usually want them bridged to one place to another automatically. I configure them to create tap devices, with descriptive names (when you have 16 or more active interfaces at any one time, descriptive helps :-). I then create an ifcfg file like so: BOOTPROTO='none' NAME='Some Qemu Instance External Interface' STARTMODE='auto' USERCONTROL='yes' POST_UP_SCRIPT='ifup-bridgeport' PRE_DOWN_SCRIPT='ifdown-bridgeport' BRIDGENAME='dot23' If I called it ifcfg-foo and had Qemu create a tap device called foo, It would automatically be bridged to vlan4 on creation. This setup has been working quite well for me, and it would be nice if similar functionality were available in openSUSE by default. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9