December 2006 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 224775] zen-remove will attempt to remove all the packages **always**
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224775 ------- Comment #6 from jjoy(a)novell.com 2006-12-01 00:39 MST ------- ooopss.. i see the problem.. AJ, Attached is the log.. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 224818] RC4: Installation bails out with "cannot start novell-zmd" even though zmd is up and running
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224818 ------- Comment #29 from aj(a)novell.com 2006-12-01 00:27 MST ------- Miguel, what is the patch for #23? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 224775] zen-remove will attempt to remove all the packages **always**
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224775 aj(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |kkaempf(a)novell.com Info Provider|schubi(a)novell.com |jjoy(a)novell.com ------- Comment #5 from aj(a)novell.com 2006-12-01 00:23 MST ------- Jinu, please send the complete output from rug! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 216061] New: yenta_cardbus: probe of 0000:00:0a.0 failed with error -12 + DMA hard-Disk Trouble
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=216061 Summary: yenta_cardbus: probe of 0000:00:0a.0 failed with error -12 + DMA hard-Disk Trouble Product: SUSE Linux 10.1 Version: Final Platform: 32bit OS/Version: SuSE Linux 10.1 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers(a)forge.provo.novell.com ReportedBy: frederik.mattelaere(a)telenet.be QAContact: qa(a)suse.de Hi, I hope this post is correctly here at this page! The problem I have with the new version of the kernel updated by the suse linux 10.1 operating system is that I have errors with the yenta_socket (PCMCIA). Below this mail I did copy the entire page that I did get with the bash commando dmesg: The kernel version I use = 2.6.16.21-0.25-default The PCMCIA-autils version =012-11 The specific error I get with this kernel = yenta_cardbus: probe of 0000:00:0a.0 failed with error -12 The notebook I use = Aspire 1300 serie (1302XC aspire) I do also have a problem on this computer with the DMA support of mine Hard-Disk. It seems when I start up the computer it complete freeze the operating system! I did put off the DMA from mine hard-disk and know it seems that he is not hanging annymore! If you need more information about mine system, please feel free to contact me, and give me the commando's I need to use to get the specific information. I hope this mail will be send to the correct place, because I'm a newbie on linux... Thanx for te help, Best Regards, Frederik --------------------- Computer information: --------------------- 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 80) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: bus master, medium devsel, latency 8 Memory at a0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Capabilities: [c0] Power Management version 2 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000dfff Memory behind bridge: e0000000-efffffff Prefetchable memory behind bridge: 90000000-9fffffff Capabilities: [80] Power Management version 2 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: stepping, slow devsel, IRQ 11 Memory at 0c000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 10000000-11fff000 (prefetchable) Memory window 1: 12000000-13fff000 I/O window 0: 00001400-000014ff I/O window 1: 00001800-000018ff 16-bit legacy interface ports at 0001 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: bus master, medium devsel, latency 64 I/O ports at 1100 [size=16] Capabilities: [c0] Power Management version 2 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: bus master, medium devsel, latency 22, IRQ 11 I/O ports at 1200 [size=32] Capabilities: [80] Power Management version 2 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: medium devsel Capabilities: [68] Power Management version 2 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: medium devsel, IRQ 10 I/O ports at e000 [size=256] I/O ports at e100 [size=4] I/O ports at e104 [size=4] Capabilities: [c0] Power Management version 2 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 20) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: medium devsel, IRQ 10 I/O ports at e200 [size=256] Capabilities: [d0] Power Management version 2 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: bus master, medium devsel, latency 16, IRQ 11 I/O ports at e800 [size=256] Memory at f0000000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01) (prog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI] Unknown device 001d Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 Memory at e0000000 (32-bit, non-prefetchable) [size=512K] Memory at 90000000 (32-bit, prefetchable) [size=128M] Expansion ROM at 98000000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Capabilities: [80] AGP version 2.0 Linux version 2.6.16.21-0.25-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Tue Sep 19 07:26:15 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eff0000 (usable) BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data) BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 239MB LOWMEM available. No mptable found. On node 0 totalpages: 61424 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 57328 pages, LIFO batch:15 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 OID_00 ) @ 0x000e4010 ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 & 0x00010007) @ 0x0efffbc0 ACPI: FADT (v002 INSYDE FACP_000 0x00000100 & 0x00010007) @ 0x0efffac0 ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 & 0x00010007) @ 0x0efffb50 ACPI: DBGP (v001 INSYDE SYS_DBGP 0x00000100 & 0x00010007) @ 0x0efffb80 ACPI: DSDT (v001 INSYDE VT8362 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 10000000 (gap: 0f000000:f0f80000) Built 1 zonelists Kernel command line: root=/dev/hda7 vga=0x314 resume=/dev/hda6 splash=silent bootsplash: silent mode. Local APIC disabled by BIOS -- you can enable it with "lapic" Enabling fast FPU save and restore... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1400.331 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 237992k/245696k available (1490k kernel code, 7116k reserved, 608k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2804.35 BogoMIPS (lpj=5608703) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon(tm) XP 1600+ stepping 00 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 2323k freed not found! ACPI: setting ELCR to 0200 (from 0c00) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PCI: setting IRQ 13 as level-triggered pnp: PnP ACPI: found 11 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev(a)vger.kernel.org cc hadi(a)cyberus.ca) Setting up standard PCI resources pnp: 00:07: ioport range 0x1600-0x167f has been reserved pnp: 00:07: ioport range 0x2c8-0x2cf has been reserved pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:07: ioport range 0x1000-0x105f could not be reserved PCI: Bridge: 0000:00:01.0 IO window: c000-dfff MEM window: e0000000-efffffff PREFETCH window: 90000000-9fffffff PCI: Bus 2, cardbus bridge: 0000:00:0a.0 IO window: 00001400-000014ff IO window: 00001800-000018ff PREFETCH window: 10000000-11ffffff MEM window: 12000000-13ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Simple Boot Flag at 0x37 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1161976651.600:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Applying VIA southbridge workaround. vesafb: framebuffer at 0x90000000, mapped to 0xcf880000, using 3750k, total 15296k vesafb: mode is 800x600x16, linelength=1600, pages=14 vesafb: protected mode interface info at c000:7926 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 50686 bytes,<6>...found (800x600, 28094 bytes, v3). Console: switching to colour frame buffer device 96x33 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 input: PC Speaker as /class/input/input3 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 156k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N080ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 > Probing IDE interface ide1... hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (79 C) Attempting manual resume ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode reiserfs: using flush barriers ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names Adding 481908k swap on /dev/hda6. Priority:-1 extents:1 across:481908k parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] parport_pc: VIA parallel port: io=0x378, irq=7 lp0: using parport0 (interrupt-driven). hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:11.2: irq 11, io base 0x00001200 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16.21-0.25-default uhci_hcd usb usb1: SerialNumber: 0000:00:11.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: AGP aperture is 64M @ 0xa0000000 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker PCI: Enabling device 0000:00:12.0 (0001 -> 0003) ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 eth0: VIA Rhine II at 0x1e800, 00:c0:9f:1c:a1:f8, IRQ 11. eth0: MII PHY found at address 1, status 0x782d advertising 01e1 Link 45e1. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:11.5 to 64 hwmon: module not supported by Novell, setting U taint flag. vt8231: module not supported by Novell, setting U taint flag. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 yenta_cardbus: probe of 0000:00:0a.0 failed with error -12 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hda: DMA disabled device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel(a)redhat.com dm-netlink version 0.0.2 loaded loop: loaded (max 8 devices) ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode reiserfs: using flush barriers ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names NTFS driver 2.1.26 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS volume version 3.1. AppArmor: AppArmor (version 2.0-19.43r6320) initialized audit(1161976680.693:2): AppArmor (version 2.0-19.43r6320) initialized NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (1919 buckets, 15352 max) - 232 bytes per conntrack ACPI: AC Adapter [ADP0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] audit(1161969500.889:3): audit_backlog_limit=256 old=64 by auid=4294967295 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found powernow-k8: Processor cpuid 680 not supported powernow: PowerNOW! Technology present. Can scale: frequency and voltage. Detected 1400.331 MHz processor. powernow: SGTC: 10000 powernow: Minimum speed 500 MHz. Maximum speed 1400 MHz. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 bootsplash: status on console 0 changed to on eth0: no IPv6 routers present mtrr: no more MTRRs available SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.00.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31606 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFFC5ACB46BDF2F) SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=49 ID=0 DF PROTO=TCP SPT=80 DPT=5824 WINDOW=0 RES=0x00 RST URGP=0 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31607 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFFC5E4B46BDF2F) SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3807 PROTO=TCP SPT=80 DPT=5824 WINDOW=0 RES=0x24 RST URGP=0 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31608 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFFC65AB46BDF2F) SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3809 PROTO=TCP SPT=80 DPT=5824 WINDOW=0 RES=0x24 RST URGP=0 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31609 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFFC741B46BDF2F) SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3811 PROTO=TCP SPT=80 DPT=5824 WINDOW=0 RES=0x24 RST URGP=0 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31610 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFFC906B46BDF2F) SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3813 PROTO=TCP SPT=80 DPT=5824 WINDOW=0 RES=0x24 RST URGP=0 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31613 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFFE189B46BDF2F) SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3819 PROTO=TCP SPT=80 DPT=5824 WINDOW=0 RES=0x04 RST URGP=0 SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.4 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31614 DF PROTO=TCP SPT=5824 DPT=80 WINDOW=2246 RES=0x00 ACK FIN URGP=0 OPT (0101080AFFFFFD89B46BDF2F) SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:c0:9f:1c:a1:f8:00:c0:49:d6:13:6a:08:00 SRC=80.237.136.138 DST=192.168.1.4 LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=3821 PROTO=TCP SPT=80 DPT=5824 WINDOW=0 RES=0x00 RST URGP=0 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] SCSI subsystem initialized ppa: Version 2.07 (for Linux 2.4.x) end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 st: Version 20050830, fixed bufsize 32768, s/g segs 256 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] parport_pc: VIA parallel port: io=0x378, irq=7 lp0: using parport0 (interrupt-driven). parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] ppa: Version 2.07 (for Linux 2.4.x) end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:c0:49:d6:13:6a:08:00 SRC=192.168.1.1 DST=2240.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF OPT (94040000) PROTO=2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 9

[Bug 224818] RC4: Installation bails out with "cannot start novell-zmd" even though zmd is up and running
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224818 aj(a)novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |jpr(a)novell.com ------- Comment #26 from aj(a)novell.com 2006-11-30 22:36 MST ------- JP, where's the source RPM? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 224775] zen-remove will attempt to remove all the packages **always**
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224775 ------- Comment #4 from jjoy(a)novell.com 2006-11-30 22:22 MST ------- I tried this on my OpenSuSE 10.2 RC4 setup. I get the exact same behaviour on both rug and zen-remover. First I tried removing a package with no dependency (zsh), zen-remover and rug both removed the package successfully. Then I tried removing "alsa" package. The dependency list was quite huge but the behaviour itself was same on both rug and zen-remover. I tried removing the same package using "rpm -e" and I got the same dependencies.. Did not quite get the problem here.. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 224818] RC4: Installation bails out with "cannot start novell-zmd" even though zmd is up and running
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224818 ------- Comment #25 from jpr(a)novell.com 2006-11-30 21:39 MST ------- New packages in the same place, with the patch applied correctly. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 197190] IA64: Xserver shutdown freezes machine w/ R420 + flat panels
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=197190 ------- Comment #60 from sndirsch(a)novell.com 2006-11-30 21:36 MST ------- >We know this hardware combination works fine in SLES10, so to narrow it down, >I tried it with a sles10 kernel (required a change to >valid_mmap_phys_addr_range() so the /dev/mem mmap didn't fail) and the radeon >driver at tag XORG-7_0 (which I believe is SLES10?). Not at all. We had tons of patches on top of X.Org 6.9's radeon driver --> see xorg-x11-driver-video package of SLES10. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0

[Bug 224796] New: SCIM: A wrong entry in scim's compose key table.
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224796 Summary: SCIM: A wrong entry in scim's compose key table. Product: openSUSE 10.2 Version: RC 4 Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: Basesystem AssignedTo: zsu(a)novell.com ReportedBy: zsu(a)novell.com QAContact: qa(a)suse.de CC: mfabian(a)novell.com There is a wrong entry in scim's compose key table (scim_compose_key_data.h), which causes en-dash and em-dash couldn't be inputted correctly. A simple patch will be attached to fix this issue. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 6

[Bug 224376] Install screen says "Esc for Details" but it's still F2 that works
by bugzilla_noreply＠novell.com 01 Dec '06

01 Dec '06

https://bugzilla.novell.com/show_bug.cgi?id=224376 ------- Comment #2 from dgluss(a)hotmail.com 2006-11-30 18:57 MST ------- There's no log file...it's part of the initial installation. Slip CD1 into the drive and boot from it. At that point there is no hard drive to write the log onto. Once you've rebooted and you're going to run yast, then escape works as advertised. It's only the initial boot that isn't right. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 0