December 2006 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 220224] New: driver_module vs. driver, typo in hwinfo interface
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=220224 Summary: driver_module vs. driver, typo in hwinfo interface Product: openSUSE 10.2 Version: Beta 2 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com bug #194111 is still not fixed hardware-detection/src/HwParse.cc puts eventually "driver_module" in the the disk map which is used in storage/storage/src/modules/Storage.ycp:GetRootInitrdModules() but hwinfo | grep driver_module fails, it has to be driver instead of driver_module ->driver_module is never set nor printed in hwinfo. but ->driver is set. 51: SCSI 400.0: 10600 Disk [Created at block.218] UDI: /org/freedesktop/Hal/devices/storage_serial_0001d20000038f29_0_0 Unique ID: 5KpK.9LdSn3EG3vA Parent ID: Soh2.9PoWW2akrjD SysFS ID: /block/sdc SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0001:00/0001:00:09.0/0001:03:0e.0/fw-host0/0001d20000038f29/0001d20000038f29-0/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "Maxtor 9 0648D3" Vendor: "Maxtor 9" Device: "0648D3" Serial ID: "A3HQQFFC" Driver: "sbp2", "sd" Device File: /dev/sdc (/dev/sg2) Device Files: /dev/sdc, /dev/disk/by-id/ieee1394-0001d20000038f29:0:0, /dev/disk/by-path/pci-0001:03:0e.0-ieee1394-0x0001d20000038f29:0:0 Device Number: block 8:32-8:47 (char 21:2) PROM id: ht@0,f2000000/pci@9/firewire@e/@0 Features: Hotpluggable Geometry (Logical): CHS 1020/200/62 Size: 12656448 sectors a 512 bytes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (FireWire (IEEE 1394)) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 220762] New: linuxrc shows 2 network cards on powerbook wallstreet
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=220762 Summary: linuxrc shows 2 network cards on powerbook wallstreet Product: openSUSE 10.2 Version: Beta 2 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: snwint(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de 10.2b2, in linuxrc manual mode: there are 2 network interfaces shown. 'eth0 Paddington IO' and 'bmac' Paddington IO shouldnt be shown, its not a network card. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 220739] New: lilo does not copy the kernels correctly to the HFS boot partition
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=220739 Summary: lilo does not copy the kernels correctly to the HFS boot partition Product: openSUSE 10.2 Version: Beta 2 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: jplack(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de CC: power-bugs(a)forge.provo.novell.com 10.2b2 if the root filesystem is on lvm or raid, lilo has to copy the kernel and initrd to the HFS boot partition because yaboot can not read from lvm. All this works ok. But if the vmlinux or initrd has a filename longer than 31 chars, the copying will fail because HFS has a filename length limit. lilo should use the same copy scheme thats used for FAT on chrp, call the binaries vmlinux.001 and initrd.001 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 5

[Bug 221288] New: selecting all patterns will install another kernel, mkinitrd will pick the wrong one
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=221288 Summary: selecting all patterns will install another kernel, mkinitrd will pick the wrong one Product: openSUSE 10.2 Version: Beta 2 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de CC: power-bugs(a)forge.provo.novell.com 10.2b2+ install on mac.suse.de, gnome, all patterns selected. during install, something did pull kernel-default in addition to kernel-ppc64 this leads to a dead /boot/initrd symlink. the question is, who selects the incorrect kernel-default? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 16

[Bug 221337] New: can not mount partitions via desktop icons
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=221337 Summary: can not mount partitions via desktop icons Product: openSUSE 10.2 Version: Beta 2 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de 10.2b2+, fresh gnome install on sda with all patterns selected. the gnome desktop offers all the partitions from sdb as desktop icons. but mounting them fails with 'Cannot mount volume.' mac:~ # cat /etc/fstab /dev/sda3 / ext3 acl,user_xattr 1 1 /dev/sda4 /home ext3 acl,user_xattr 1 2 /dev/sdb3 swap swap defaults 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 mac:~ # pdisk -l Partition map (with 512 byte blocks) on '/dev/sda' #: type name length base ( size ) 1: Apple_partition_map 'Apple ' 63 @ 1 2: Apple_HFS 'Untitled' 96327 @ 64 ( 47.0M) 3: Apple_UNIX_SVR2 'primary ' 41945715 @ 96391 ( 20.0G) 4: Apple_UNIX_SVR2 'primary ' 114259382 @ 42042106 ( 54.5G) Device block size=512, Number of Blocks=156301488 (74.5G) DeviceType=0x0, DeviceId=0x0 Partition map (with 512 byte blocks) on '/dev/sdb' #: type name length base ( size ) 1: Apple_partition_map 'Apple ' 63 @ 1 2: Apple_HFS 'boot sdb ' 204800 @ 64 (100.0M) 3: Linux 'backup_swap ' 2048000 @ 204864 (1000.0M) 4: Linux 'backup_root ' 40960000 @ 2252864 ( 19.5G) 5: Linux 'backup_abuild ' 40960000 @ 43212864 ( 19.5G) 6: Linux 'backup_packages' 40960000 @ 84172864 ( 19.5G) 7: Linux 'backup_backup ' 31168624 @ 125132864 ( 14.9G) 8: Apple_Free 'Extra ' 11088 @ 156301488 ( 5.4M) Device block size=512, Number of Blocks=156312576 (74.5G) DeviceType=0x0, DeviceId=0x0 xsession-errors has some not-so-nice messages, maybe they are related. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 16

[Bug 221350] New: remove vnc login does not work with gdm, but it does with kdm
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=221350 Summary: remove vnc login does not work with gdm, but it does with kdm Product: openSUSE 10.2 Version: Beta 2 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de 10.2b2+, gnome default install on lemon.suse.de I did a vnc install, runlevel 5 was enabled, a local user was created. a remote connect with vncviewer lemon:1 starts an xserver, but gdm never appears. this works ok on another host, date.suse.de, it has a kde default install. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 221496] New: disabling network interfaces in yast is ignored by network manager
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=221496 Summary: disabling network interfaces in yast is ignored by network manager Product: openSUSE 10.2 Version: Beta 2 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com 10.2b2+ minimal textmode install on snowberry.suse.de, switching to network manager. there are 2 onboard tg3 interfaces. both have cables connected, both interfaces will get ip addresses via a dhcp server. during second stage, when switching to network manager, eth1 was auto-selected as dhcp client. after reboot, only eth1 got an ip. I disabled 00:0d:60:1e:cc:f5 in yast lan, but after reboot, eth1 was still active. I'm expecting that network manager is doing what yast is telling him. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 13

[Bug 221455] New: error -3028 while creating/setting lvm partition label
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=221455 Summary: error -3028 while creating/setting lvm partition label Product: openSUSE 10.2 Version: Beta 2 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com 10.2b2+, loganberry.suse.de, whole disk with lvm proposal. 'Setting label of /dev/hda2 to' system error code was: -3028 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 5

[Bug 221351] New: filesystem labels symlinked to wrong device node
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=221351 Summary: filesystem labels symlinked to wrong device node Product: openSUSE 10.2 Version: Beta 2 plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: ksievers(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de CC: hare(a)novell.com pokeberry.suse.de, I had to fixup the boot config. booted into the 10.2b2+ inst-sys, tried to mount the raid0: inst-sys:~ # raidautorun inst-sys:~ # blkid /dev/hda1: SEC_TYPE="msdos" UUID="4558-77F1" TYPE="vfat" /dev/hda2: TYPE="swap" /dev/hda3: UUID="e00d341a-75b5-770d-5ad1-931361726564" TYPE="mdraid" /dev/hdc2: TYPE="swap" /dev/hdc3: UUID="e00d341a-75b5-770d-5ad1-931361726564" TYPE="mdraid" /dev/md0: LABEL="root_blade4" UUID="2aec6427-c18c-4e79-93b8-a38c6d815132" SEC_TYPE="ext2" TYPE="ext3" inst-sys:~ # mount -vL root_blade4 /mnt mount: mounting /dev/disk/by-label/root_blade4 mount: you didn't specify a filesystem type for /dev/disk/by-label/root_blade4 I will try type ext3 mount: /dev/disk/by-label/root_blade4 already mounted or /mnt busy inst-sys:~ # cat /proc/mounts rootfs / rootfs rw 0 0 tmpfs / tmpfs rw 0 0 tmpfs / tmpfs rw 0 0 proc /proc proc rw 0 0 sysfs /sys sysfs rw 0 0 10.10.0.100:/dist/install/SLP/openSUSE-10.2-Beta2plus/ppc/CD1 /var/adm/mount nfs ro,vers=3,rsize=32768,wsize=32768,hard,nolock,proto=tcp,timeo=7,retrans=3,sec=sys,addr=10.10.0.100 0 0 /dev/loop0 /mounts/instsys cramfs ro 0 0 devpts /dev/pts devpts rw 0 0 inst-sys:~ # mount -vL root_blade4 /mnt mount: mounting /dev/disk/by-label/root_blade4 mount: you didn't specify a filesystem type for /dev/disk/by-label/root_blade4 I will try type ext3 mount: /dev/disk/by-label/root_blade4 already mounted or /mnt busy inst-sys:~ # mount -v /dev/md0 /mnt mount: you didn't specify a filesystem type for /dev/md0 I will try type ext3 /dev/md0 on /mnt type ext3 (rw) inst-sys:~ # ls -l /dev/disk/by-label/root_blade4 lrwxrwxrwx 1 root root 10 Nov 15 16:19 /dev/disk/by-label/root_blade4 -> ./../hda3 the root_blade4 should point to md0, not hda3 root pwd on pokeberry.suse.de is foobar -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 221633] New: something grabs the Alt_L key, preventing alt+f2 to run a command
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=221633 Summary: something grabs the Alt_L key, preventing alt+f2 to run a command Product: openSUSE 10.2 Version: Beta 2 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome(a)forge.provo.novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de 10.2b2+ gnome installation on mac.suse.de, all patterns selected. alt+f2 to run a command works exactly once. every further attempt does just open this computer menu. Oddly enough, the same happens if I press the Super_R key (which is mapped to the right Apple/Command key). running xev does not help at all, there is only a Return key event, but I certainly never pressed return. Something seems to grab keyevents before they reach the Xserver. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4