December 2006 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 216059] New: G5 should use UTC instead of localtime
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=216059 Summary: G5 should use UTC instead of localtime Product: openSUSE 10.2 Version: Beta 1 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com There is some flaky code in the powermac kernel that adjusts the system clock based on some timezone value in the nvram. MacOS 9 uses this timezone offset. This code runs only on 32bit, OS9 does not run on G5. A G5 has to run always with UTC instead of localtime. YaST has some code to force localtime on pmac. This should happen only on 32bit, not on 64bit. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 216079] New: xserver does not start after initial reboot because required base fonts are not on CD1
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=216079 Summary: xserver does not start after initial reboot because required base fonts are not on CD1 Product: openSUSE 10.2 Version: Beta 1 Platform: PowerPC OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com 10.2b1-ppc the Xserver does not start after initial reboot because required base fonts are not on CD1. this happens if there is not enough ram to relase the inst-sys/CD1. The required package seems to be on CD2 or CD3. Xorg.0.log has 'could not load default font fixed' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 25

[Bug 216805] New: dhcdbd fills hard disk if dbus is not running
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=216805 Summary: dhcdbd fills hard disk if dbus is not running Product: openSUSE 10.2 Version: Beta 1 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: rml(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de 10.2b1 I booted into runlevel 2 and run dhcpcd eth0 ; rcsshd start to copy some files onto this system. The disk was constantly busy. dhcdbd complains to syslog about lack of dbus every 3 seconds. The network just works fine. It should just shut up and not complain about lack of dbus. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 19

[Bug 216222] New: boot partition too small with lvm proposal
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=216222 Summary: boot partition too small with lvm proposal Product: openSUSE 10.2 Version: Beta 1 Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com CC: power-bugs(a)forge.provo.novell.com the 0x41 prep boot partition as created with 'use whole disk and remove existing partitions and also do a lvm proposal without extra home partition but no evms please' is only 8mb on a 40G IDE disk. The boot loader cant be installed because the kernel+initrd+booloader do not fit on an 8mb FAT partition. On SLES10 and earlier, if using 'whole disk', the 0x41 prep boot partition was around 16mb. inst-sys:~ # chroot /mnt su - -c lilo running on chrp Boot target is /dev/hda1 ERROR: Boot partition '/dev/hda1' cannot hold 24588 blocks inst-sys:~ # fdisk -l Disk /dev/hda: 40.0 GB, 40007761920 bytes 255 heads, 63 sectors/track, 4864 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 1 8001 41 PPC PReP Boot /dev/hda2 2 4864 39062047+ 8e Linux LVM Disk /dev/dm-0: 21.4 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 2147 MB, 2147483648 bytes 255 heads, 63 sectors/track, 261 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk /dev/dm-1 doesn't contain a valid partition table inst-sys:~ # dd if=/dev/hda1 | wc -c 8193024 16002+0 records in 16002+0 records out 8193024 bytes (8.2 MB) copied, 0.336943 s, 24.3 MB/s inst-sys:~ # cat /mnt/etc/lilo.conf # Modified by YaST2. Last modification on Mon Oct 30 11:17:02 UTC 2006 activate timeout = 80 boot = /dev/hda1 default = linux image = /boot/vmlinux ###Don't change this comment - YaST2 identifier: Original name: linux### label = linux append = " quiet sysrq=1 panic=42" initrd = /boot/initrd root = /dev/system/root inst-sys:~ # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 7

[Bug 217300] New: no sound on G5, snd-aoa not known by yast
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=217300 Summary: no sound on G5, snd-aoa not known by yast Product: openSUSE 10.2 Version: Beta 1 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de CC: power-bugs(a)forge.provo.novell.com some early G5 models did work ok with the snd-powermac driver. But the newer ones do now require a new snd-aoa driver. Unfortunately, yast always picks snd-powermac. how does yast know what card to choose? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 30

[Bug 217285] New: incorrect error message if no boot partititon found
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=217285 Summary: incorrect error message if no boot partititon found Product: openSUSE 10.2 Version: Beta 1 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com CC: power-bugs(a)forge.provo.novell.com another attempt. if yast bootloader cant figure out where to write the boot loader, it shows (in red): _Booting_ 'Configure a valid boot loader location before continuing. In case that no selection can be made it may be neccessary to create a PReP boot partition.' the second line makes only sense on chrp and prep. not on pmac. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 217355] New: libstdc++-64bit >= 4.1.2_20061024-3 is needed by libstdc++41-devel-64bit-4.1.2_20061024-3.ppc
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=217355 Summary: libstdc++-64bit >= 4.1.2_20061024-3 is needed by libstdc++41-devel-64bit-4.1.2_20061024-3.ppc Product: openSUSE 10.2 Version: Beta 1 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: matz(a)novell.com ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de there is appearently a '41' missing in the required or obsoleted package name. rpm -Uvh ppc/libstdc++41-devel-64bit.rpm error: Failed dependencies: libstdc++-64bit >= 4.1.2_20061024-3 is needed by libstdc++41-devel-64bit-4.1.2_20061024-3.ppc rpm -Uvh ppc/libstdc++41-devel-64bit.rpm ppc/libstdc++41-64bit.rpm error: Failed dependencies: libstdc++-64bit = 4.1.0-28.4 is needed by (installed) libstdc++-devel-64bit-4.1.0-28.4.ppc -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 2

[Bug 217336] New: vnc textmode only install fails in second stage
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=217336 Summary: vnc textmode only install fails in second stage Product: openSUSE 10.2 Version: Beta 1 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: jsrain(a)novell.com a vnc install with minimal.sel is supposed to work. Its almost perfect with 10.2b1+, but Xvnc can start because it misses some fonts. Current Xorg is very picky: checkerberry:~ # o /var/log/YaST2/vncserver.log Xvnc Free Edition 4.1.2 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Underlying X server release 70100000, The X.Org Foundation Thu Nov 2 12:41:43 2006 vncext: VNC extension running! vncext: Listening for VNC connections on port 5901 vncext: Listening for HTTP connections on port 5801 vncext: created VNC server for screen 0 error opening security policy file /usr/lib/xserver/SecurityPolicy Could not init font path element /usr/share/fonts/misc/, removing from list! Could not init font path element /usr/share/fonts/truetype/, removing from list! Fatal server error: could not open default font 'fixed' checkerberry:~ # either one more package has to be added to the hardcoded list in Packages.ycp, or xorg has to pull in the required package via Requires: This may also fix the similar bug #216079 I currently do not know what package is actually missing. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 8

[Bug 217671] New: kdm does not start after upgrade due to kdmrc errors
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=217671 Summary: kdm does not start after upgrade due to kdmrc errors Product: openSUSE 10.2 Version: Beta 1 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de cowberry.suse.de had some 10.1 installed, which was upgraded from 10.0. After upgrading to 10.2b1+, kdm will not start X: Nov 3 05:03:39 cowberry kdm_config[3203]: Unrecognized key 'EchoMode' in section [X-*-Core] at /var/adm/kdm/kdmrc.sysconfig:18 Nov 3 05:03:39 cowberry kdm_config[3203]: Multiple occurrences of section [General] in /opt/kde3/share/config/kdm/kdmrc. Consider merging them. Nov 3 05:03:39 cowberry kdm_config[3203]: Multiple occurrences of section [Xdmcp] in /opt/kde3/share/config/kdm/kdmrc. Consider merging them. Nov 3 05:03:39 cowberry kdm_config[3203]: Multiple occurrences of section [X-*-Core] in /opt/kde3/share/config/kdm/kdmrc. Consider merging them. Nov 3 05:03:39 cowberry kdm_config[3203]: Multiple occurrences of section [X-*-Greeter] in /opt/kde3/share/config/kdm/kdmrc. Consider merging them. Nov 3 05:03:39 cowberry kdm_config[3203]: Multiple occurrences of section [X-:0-Core] in /opt/kde3/share/config/kdm/kdmrc. Consider merging them. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 11

[Bug 217551] New: non-working network after selecting network manager instead of ifup
by bugzilla_noreply＠novell.com 16 Jul '08

16 Jul '08

https://bugzilla.novell.com/show_bug.cgi?id=217551 Summary: non-working network after selecting network manager instead of ifup Product: openSUSE 10.2 Version: Beta 1 plus Platform: PowerPC OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: yast2-maintainers(a)suse.de ReportedBy: olh(a)novell.com QAContact: qa(a)suse.de 10.2b1+ on crowberry.suse.de nfs install from dist, all patterns and all languages selected, vnc+ssh. I selected network manager instead of ifup in yast. yast told me (in red) that a new network interface was added to the firewall. After configuring everything, the system booted. But the network interface eth0 had only an ipv6 address. The internal eth1 was appearently the default now. After reboot, none of the 2 interfaces has an IP assigned. So what is this bug all about? I dont know yet, it seems network manager just doesnt work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 15