Hallo Schöppi,
vielen Dank für Deine/Eure Tips. Nachdem ich die Platte eine Western
Digital 40 GB nochmals umgetauscht habe gegen eine IBM, die sich auf 32 GB
begrenzen läßt, da mein Mainboard keine größeren unterstützt, hatte ich
keine Probleme die Platte zu partitionieren (2 GB primär für DOS, 30 GB
erweiter für EXT2). Auch das formatieren war kein Problem.
Um nun das laufende UMSDOS-System auf die EXT2-Platte zu bekommen, habe
ich mit
tar czf /mnt/didislin.tgz /
ein Backup gemacht und dieses dann auf der EXT2-Platte ausgepackt. Die
fstab habe ich dann wie folgt angepaßt:
/dev/fd2 / ext2 defaults 0 0
/root/swapfile swap swap defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
none /proc proc defaults 0 0
e:\loadlin\loadlin e:\loadlin\vmlinuz.220 root=/dev/hdc5
speakup_synth=apolo speakup_ser=0 ro
Beim ersten Versuch das "neue" Linux zu starten, wurde gemeckert, weil ich
anstelle des RO ein RW in der Strtzeile von Loadlin hatte. Ansonsten läuft
es aber ohne Murren hoch.
verwundert hat mich nur, daß beim Packen mit tar einige symbolische Links
im Verzeichnis /dev verlorengegangen sind, die ich von Hand neu angelegt
habe.
Gruß
Dietmar
rem Specifying the partition
rem Replace hda1 in the above example with the appropriate name for your hard drive
rem The first IDE hard drive is hda, the second drive hdb etc
rem ON the drive each partition is numbered starting at 1
rem Therefore I use hda1, the first partition on the first IDE hard drive
rem If you don't know, this is a good one to try first
rem For SCSI disks replace hd with sd, giving sda1 for the first partition on the first SCSI drive
rem If you're using an IDE Iomega Zip drive try hda4 or hdb4
rem If you're using a SCSI Iomega Zip drive try sda4 or sdb4
rem If you're using a parallel Iomega Zip drive refer to the file \zipspeak\readme.pa
rem Specifying a synthesiser
rem If you don't want ZipSpeak to talk by default for some odd reason just delete the two sections to do with Speakup
rem Otherwise, replace apolo with one of the following keywords depending on which synthesiser you use
rem acntpc = Accent PC
rem acntsa = Accent SA
rem apolo = Apollo 2
rem audptr = Audapter
rem bns = Any Blazie note-taker
rem decexp = Older DEC-Talk externals such as the Multi-Voice
rem dectlk = DEC-Talk Express
rem ltlk = Doubletalk LT or Litetalk
rem dtlk = Doubletalk PC
rem spkout = Speakout
rem txprt = Transport
rem As you can see I'm using an Apollo 2
rem Specifying which port your synthesiser is connected to
rem If you're using an internal synthesiser (Accent PC/Doubletalk PC)
rem you should delete the speakup_ser part of the example command
rem Otherwise change the number 0 as follows
rem 0 = Com 1 under DOS
rem 1 = Com 2 under DOS
rem 2 = Com 3 under DOS
rem 3 = Com 4 under DOS
rem As you can see my Apollo 2 is connected to com 1
rem And that's it - congratulations!
rem Plug in your synthesiser, turn it on and try running this batch file
rem Good luck in your Linux/ZipSpeak adventures
rem Please don't hesitate to get in touch if you need any help
rem but do check out the docs in the \zipspeak folder
rem Saqib Shaikh