On Jun 25, 2007, at 5:15 PM, Doctor Who wrote:

Can NIC bonding/teaming be accomplish using AutoYaST? I imagine this would be done with a post-install script. Assuming there were 2 10/100 NICs (normally eth0 & eth1) what might this look like?

Here's my hack to do this: <files config:type="list"> <file> <![CDATA[BOOTPROTO='NONE' MTU='9000' NAME='Hewlett-Packard Company NetXtreme BCM5721 Gigabit Ethernet PCI Express' STARTMODE='off' UNIQUE='rBUF.5sChhDFnqQ7' _nm_name='bus-pci-0000:02:00.0' ]]> root /etc/sysconfig/network/ifcfg-eth0 644 </file> <file> <![CDATA[BOOTPROTO='NONE' MTU='9000' NAME='Hewlett-Packard Company NetXtreme BCM5721 Gigabit Ethernet PCI Express' STARTMODE='off' UNIQUE='JNkJ.5sChhDFnqQ7' _nm_name='bus-pci-0000:03:00.0' ]]> root /etc/sysconfig/network/ifcfg-eth1 644 </file> <file> <![CDATA[STARTMODE='onboot' BOOTPROTO='static' IPADDR='10.1.108.51/24' BONDING_MASTER='yes' BONDING_SLAVE_0='eth0' # you can use eth0 here, too BONDING_SLAVE_1='eth1' # or eth1 BONDING_MODULE_OPTS='mode=1 primary=eth1 arp_interval=1000 arp_ip_target=+10.1.108.1' # backup mode ]]> root /etc/sysconfig/network/ifcfg-bond0 644 </file>

/files> -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org