On Jun 25, 2007, at 5:15 PM, Doctor Who wrote:
Can NIC bonding/teaming be accomplish using AutoYaST? I imagine this
would be done with a post-install script. Assuming there were 2
10/100 NICs (normally eth0 & eth1) what might this look like?
Here's my hack to do this:
<files config:type="list">
<file>
<![CDATA[BOOTPROTO='NONE'
MTU='9000'
NAME='Hewlett-Packard Company NetXtreme BCM5721 Gigabit Ethernet PCI
Express'
STARTMODE='off'
UNIQUE='rBUF.5sChhDFnqQ7'
_nm_name='bus-pci-0000:02:00.0'
]]>
root
/etc/sysconfig/network/ifcfg-eth0
644
</file>
<file>
<![CDATA[BOOTPROTO='NONE'
MTU='9000'
NAME='Hewlett-Packard Company NetXtreme BCM5721 Gigabit Ethernet PCI
Express'
STARTMODE='off'
UNIQUE='JNkJ.5sChhDFnqQ7'
_nm_name='bus-pci-0000:03:00.0'
]]>
root
/etc/sysconfig/network/ifcfg-eth1
644
</file>
<file>
<![CDATA[STARTMODE='onboot'
BOOTPROTO='static'
IPADDR='10.1.108.51/24'
BONDING_MASTER='yes'
BONDING_SLAVE_0='eth0' # you can use eth0 here, too
BONDING_SLAVE_1='eth1' # or eth1
BONDING_MODULE_OPTS='mode=1 primary=eth1 arp_interval=1000
arp_ip_target=+10.1.108.1' # backup mode
]]>
root
/etc/sysconfig/network/ifcfg-bond0
644
</file>
/files>
--
To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org