![](https://seccdn.libravatar.org/avatar/a2199fd9fd219d0f1ba8547edf61fc4d.jpg?s=120&d=mm&r=g)
Hi all: I'm booting to an http install and loading an xml file via http. The prepare and install portions of the "Auto-Installation Process" work, but the configure section gets skipped (see auto-installation process in the autoyast.pdf <figure 1.1>). The entire configure portion of the xml file (elb_x345.xml...below) is skipped. Has anyone run into this one before? I apologize for the large paste, but it should help. Brad Paste of elb_x345.xml: <?xml version="1.0"?> <!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd"> <profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <configure> <runlevel> <services config:type="list"> <service> <service_name>alsasound</service_name> <service_status>disable</service_status> </service> <service> <service_name>boot.device-mapper</service_name> <service_status>disable</service_status> </service> <service> <service_name>boot.isapnp</service_name> <service_status>disable</service_status> </service> <service> <service_name>boot.lvm</service_name> <service_status>disable</service_status> </service> <service> <service_name>boot.md</service_name> <service_status>disable</service_status> </service> <service> <service_name>boot.sysctl</service_name> <service_status>enable</service_status> </service> <service> <service_name>isdn</service_name> <service_status>disable</service_status> </service> <service> <service_name>nfs</service_name> <service_status>disable</service_status> </service> <service> <service_name>nfsboot</service_name> <service_status>disable</service_status> </service> <service> <service_name>nscd</service_name> <service_status>disable</service_status> </service> <service> <service_name>portmap</service_name> <service_status>disable</service_status> </service> <service> <service_name>powersaved</service_name> <service_status>disable</service_status> </service> <service> <service_name>slpd</service_name> <service_status>disable</service_status> </service> <service> <service_name>smbfs</service_name> <service_status>disable</service_status> </service> <service> <service_name>network</service_name> <service_status>enable</service_status> </service> <service> <service_name>xdm</service_name> <service_status>enable</service_status> </service> </services> </runlevel> <scripts> <post-scripts config:type="list"> <script> <filename>add_local_modules.pl</filename> <interpreter>perl</interpreter> <location></location> <source><![CDATA[#!/usr/bin/perl -w my $local_modules = "/etc/modprobe.conf.local"; for (my $i=0; $i<6; $i++) { `echo 'alias eth$i e1000' >> $local_modules`; } `echo '' >> $local_modules`; `echo 'options e1000 XsumRX=1,1,1,1,1,1 TxDescriptors=4096,4096,4096,4096,4096,4096 RxDescriptors=4096,4096,4096,4096,4096,4096 Speed=1000,1000,1000,1000,1000,1000 Duplex=2,2,2,2,2,2' >> $local_modules`;]]></source> </script> </post-scripts> <pre-scripts config:type="list"> <script> <filename>avoid_autoyast_boot_loop.sh</filename> <interpreter>shell</interpreter> <location></location> <source><![CDATA[#!/bin/bash /bin/eject ]]></source> </script> </pre-scripts> </scripts> <sysconfig config:type="list"> <sysconfig_entry> <sysconfig_key>SCHED_MAXTIMESLICE</sysconfig_key> <sysconfig_path>/etc/sysconfig/kernel</sysconfig_path> <sysconfig_value>300000</sysconfig_value> </sysconfig_entry> <sysconfig_entry> <sysconfig_key>SCHED_MINTIMESLICE</sysconfig_key> <sysconfig_path>/etc/sysconfig/kernel</sysconfig_path> <sysconfig_value>10000</sysconfig_value> </sysconfig_entry> </sysconfig> <x11> <color_depth config:type="integer">16</color_depth> <configure_x11 config:type="boolean">true</configure_x11> <display_manager>fvwm2</display_manager> <enable_3d config:type="boolean">false</enable_3d> <monitor> <display> <frequency config:type="integer">60</frequency> <height config:type="integer">600</height> <width config:type="integer">800</width> </display> <monitor_device>800X600@60HZ</monitor_device> <monitor_vendor> VESA</monitor_vendor> </monitor> <resolution>800X600</resolution> </x11> </configure> <install> <bootloader> <activate config:type="boolean">false</activate> <global config:type="list"> <global_entry> <key>color</key> <value>white/blue black/light-gray</value> </global_entry> <global_entry> <key>default</key> <value config:type="integer">0</value> </global_entry> <global_entry> <key>timeout</key> <value config:type="integer">8</value> </global_entry> <global_entry> <key>gfxmenu</key> <value>(hd0,1)/message</value> </global_entry> </global> <loader_device>/dev/sda</loader_device> <loader_type>grub</loader_type> <location>mbr</location> <repl_mbr config:type="boolean">false</repl_mbr> <sections config:type="list"> <section config:type="list"> <section_entry> <key>title</key> <value>Linux</value> </section_entry> <section_entry> <key>kernel</key> <value>(hd0,1)/vmlinuz root=/dev/sda3 vga=0x314 selinux=0 splash=silent resume=/dev/sda1 elevator=cfq showopts</value> </section_entry> <section_entry> <key>initrd</key> <value>(hd0,1)/initrd</value> </section_entry> </section> <section config:type="list"> <section_entry> <key>title</key> <value>Floppy</value> </section_entry> <section_entry> <key>root</key> <value>(fd0)</value> </section_entry> <section_entry> <key>chainloader</key> <value>+1</value> </section_entry> </section> <section config:type="list"> <section_entry> <key>title</key> <value>Failsafe</value> </section_entry> <section_entry> <key>kernel</key> <value>(hd0,1)/vmlinuz root=/dev/sda3 showopts ide=nodma apm=off acpi=off vga=normal noresume selinux=0 barrier=off nosmp noapic maxcpus=0 3</value> </section_entry> <section_entry> <key>initrd</key> <value>(hd0,1)/initrd</value> </section_entry> </section> </sections> </bootloader> <general> <clock> <hwclock>localtime</hwclock> <timezone>US/Central</timezone> </clock> <keyboard> <keymap>english-us</keymap> </keyboard> <language>en_US</language> <mode> <confirm config:type="boolean">false</confirm> <forceboot config:type="boolean">false</forceboot> </mode> <mouse> <id>22_exps2</id> </mouse> </general> <partitioning config:type="list"> <drive> <device>/dev/sda</device> <initialize config:type="boolean">true</initialize> <partitions config:type="list"> <partition> <filesystem config:type="symbol">swap</filesystem> <format config:type="boolean">true</format> <loop_fs config:type="boolean">false</loop_fs> <mount>swap</mount> <partition_id config:type="integer">130</partition_id> <partition_type>primary</partition_type> <size>2G</size> </partition> <partition> <filesystem config:type="symbol">reiser</filesystem> <format config:type="boolean">true</format> <fstopt>data=journal,acl</fstopt> <loop_fs config:type="boolean">false</loop_fs> <mount>/boot</mount> <mountby config:type="symbol">device</mountby> <noauto config:type="boolean">false</noauto> <partition_id config:type="integer">131</partition_id> <partition_type>primary</partition_type> <size>128M</size> </partition> <partition> <filesystem config:type="symbol">reiser</filesystem> <format config:type="boolean">true</format> <fstopt>data=journal,acl</fstopt> <loop_fs config:type="boolean">false</loop_fs> <mount>/</mount> <mountby config:type="symbol">device</mountby> <noauto config:type="boolean">false</noauto> <partition_id config:type="integer">131</partition_id> <partition_type>primary</partition_type> <size>4G</size> </partition> <partition> <filesystem config:type="symbol">reiser</filesystem> <format config:type="boolean">true</format> <fstopt>data=journal,acl</fstopt> <loop_fs config:type="boolean">false</loop_fs> <mount>/var</mount> <mountby config:type="symbol">device</mountby> <noauto config:type="boolean">false</noauto> <partition_id config:type="integer">131</partition_id> <size>8G</size> </partition> <partition> <filesystem config:type="symbol">reiser</filesystem> <format config:type="boolean">true</format> <fstopt>data=journal,acl</fstopt> <loop_fs config:type="boolean">false</loop_fs> <mount>/usr</mount> <mountby config:type="symbol">device</mountby> <noauto config:type="boolean">false</noauto> <partition_id config:type="integer">131</partition_id> <size>8G</size> </partition> <partition> <filesystem config:type="symbol">reiser</filesystem> <format config:type="boolean">true</format> <fstopt>data=journal,acl</fstopt> <loop_fs config:type="boolean">false</loop_fs> <mount>/opt</mount> <mountby config:type="symbol">device</mountby> <noauto config:type="boolean">false</noauto> <partition_id config:type="integer">131</partition_id> <size>max</size> </partition> </partitions> <use>all</use> </drive> </partitioning> <report> <errors> <log config:type="boolean">true</log> <show config:type="boolean">true</show> <timeout config:type="integer">10</timeout> </errors> <messages> <log config:type="boolean">true</log> <show config:type="boolean">false</show> <timeout config:type="integer">10</timeout> </messages> <warnings> <log config:type="boolean">true</log> <show config:type="boolean">true</show> <timeout config:type="integer">10</timeout> </warnings> <yesno_messages> <log config:type="boolean">true</log> <show config:type="boolean">true</show> <timeout config:type="integer">10</timeout> </yesno_messages> </report> <software> <addons config:type="list"> <addon>Basis-Sound</addon> <addon>SuSE-Documentation</addon> <addon>Various-Tools</addon> <addon>WBEM</addon> <addon>X11</addon> <addon>YaST2</addon> <addon>analyze</addon> <addon>HA</addon> <addon>Kde-Desktop</addon> <addon>Linux-Tools</addon> <addon>Base-System</addon> </addons> <base>default</base> </software> </install> </profile>
participants (1)
-
Brad Hudson