From brad.hudson@gmail.com Fri Sep 24 20:56:50 2004
From: Brad Hudson <brad.hudson@gmail.com>
To: autoinstall@lists.opensuse.org
Subject: configure section does not run
Date: Fri, 24 Sep 2004 20:56:50 +0000
Message-ID: <4b3b458704092413551ac4628c@mail.gmail.com>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============7077801925692631425=="

--===============7077801925692631425==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit

Hi all:

I'm booting to an http install and loading an xml file via http.  The
prepare and install portions of the "Auto-Installation Process" work,
but the configure section gets skipped (see auto-installation process
in the autoyast.pdf <figure 1.1>).  The entire configure portion of
the xml file (elb_x345.xml...below) is skipped.  Has anyone run into
this one before?

I apologize for the large paste, but it should help.

Brad

Paste of elb_x345.xml:

<?xml version="1.0"?>
<!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd">
<profile xmlns="http://www.suse.com/1.0/yast2ns"
xmlns:config="http://www.suse.com/1.0/configns">
  <configure>
    <runlevel>
      <services config:type="list">
        <service>
          <service_name>alsasound</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>boot.device-mapper</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>boot.isapnp</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>boot.lvm</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>boot.md</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>boot.sysctl</service_name>
          <service_status>enable</service_status>
        </service>
        <service>
          <service_name>isdn</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>nfs</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>nfsboot</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>nscd</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>portmap</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>powersaved</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>slpd</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>smbfs</service_name>
          <service_status>disable</service_status>
        </service>
        <service>
          <service_name>network</service_name>
          <service_status>enable</service_status>
        </service>
        <service>
          <service_name>xdm</service_name>
          <service_status>enable</service_status>
        </service>
      </services>
    </runlevel>
    <scripts>
      <post-scripts config:type="list">
        <script>
          <filename>add_local_modules.pl</filename>
          <interpreter>perl</interpreter>
          <location></location>
          <source><![CDATA[#!/usr/bin/perl -w

my $local_modules = "/etc/modprobe.conf.local";

for (my $i=0; $i<6; $i++) {
  `echo 'alias eth$i e1000' >> $local_modules`;
}

`echo '' >> $local_modules`;

`echo 'options e1000 XsumRX=1,1,1,1,1,1
TxDescriptors=4096,4096,4096,4096,4096,4096
RxDescriptors=4096,4096,4096,4096,4096,4096
Speed=1000,1000,1000,1000,1000,1000 Duplex=2,2,2,2,2,2' >>
$local_modules`;]]></source>
        </script>
      </post-scripts>
      <pre-scripts config:type="list">
        <script>
          <filename>avoid_autoyast_boot_loop.sh</filename>
          <interpreter>shell</interpreter>
          <location></location>
          <source><![CDATA[#!/bin/bash

/bin/eject
]]></source>
        </script>
      </pre-scripts>
    </scripts>
    <sysconfig config:type="list">
      <sysconfig_entry>
        <sysconfig_key>SCHED_MAXTIMESLICE</sysconfig_key>
        <sysconfig_path>/etc/sysconfig/kernel</sysconfig_path>
        <sysconfig_value>300000</sysconfig_value>
      </sysconfig_entry>
      <sysconfig_entry>
        <sysconfig_key>SCHED_MINTIMESLICE</sysconfig_key>
        <sysconfig_path>/etc/sysconfig/kernel</sysconfig_path>
        <sysconfig_value>10000</sysconfig_value>
      </sysconfig_entry>
    </sysconfig>
    <x11>
      <color_depth config:type="integer">16</color_depth>
      <configure_x11 config:type="boolean">true</configure_x11>
      <display_manager>fvwm2</display_manager>
      <enable_3d config:type="boolean">false</enable_3d>
      <monitor>
        <display>
          <frequency config:type="integer">60</frequency>
          <height config:type="integer">600</height>
          <width config:type="integer">800</width>
        </display>
        <monitor_device>800X600(a)60HZ</monitor_device>
        <monitor_vendor> VESA</monitor_vendor>
      </monitor>
      <resolution>800X600</resolution>
    </x11>
  </configure>
  <install>
    <bootloader>
      <activate config:type="boolean">false</activate>
      <global config:type="list">
        <global_entry>
          <key>color</key>
          <value>white/blue black/light-gray</value>
        </global_entry>
        <global_entry>
          <key>default</key>
          <value config:type="integer">0</value>
        </global_entry>
        <global_entry>
          <key>timeout</key>
          <value config:type="integer">8</value>
        </global_entry>
        <global_entry>
          <key>gfxmenu</key>
          <value>(hd0,1)/message</value>
        </global_entry>
      </global>
      <loader_device>/dev/sda</loader_device>
      <loader_type>grub</loader_type>
      <location>mbr</location>
      <repl_mbr config:type="boolean">false</repl_mbr>
      <sections config:type="list">
        <section config:type="list">
          <section_entry>
            <key>title</key>
            <value>Linux</value>
          </section_entry>
          <section_entry>
            <key>kernel</key>
            <value>(hd0,1)/vmlinuz root=/dev/sda3 vga=0x314 selinux=0
splash=silent resume=/dev/sda1 elevator=cfq showopts</value>
          </section_entry>
          <section_entry>
            <key>initrd</key>
            <value>(hd0,1)/initrd</value>
          </section_entry>
        </section>
        <section config:type="list">
          <section_entry>
            <key>title</key>
            <value>Floppy</value>
          </section_entry>
          <section_entry>
            <key>root</key>
            <value>(fd0)</value>
          </section_entry>
          <section_entry>
            <key>chainloader</key>
            <value>+1</value>
          </section_entry>
        </section>
        <section config:type="list">
          <section_entry>
            <key>title</key>
            <value>Failsafe</value>
          </section_entry>
          <section_entry>
            <key>kernel</key>
            <value>(hd0,1)/vmlinuz root=/dev/sda3 showopts ide=nodma
apm=off acpi=off vga=normal noresume selinux=0 barrier=off nosmp
noapic maxcpus=0  3</value>
          </section_entry>
          <section_entry>
            <key>initrd</key>
            <value>(hd0,1)/initrd</value>
          </section_entry>
        </section>
      </sections>
    </bootloader>
    <general>
      <clock>
        <hwclock>localtime</hwclock>
        <timezone>US/Central</timezone>
      </clock>
      <keyboard>
        <keymap>english-us</keymap>
      </keyboard>
      <language>en_US</language>
      <mode>
        <confirm config:type="boolean">false</confirm>
        <forceboot config:type="boolean">false</forceboot>
      </mode>
      <mouse>
        <id>22_exps2</id>
      </mouse>
    </general>
    <partitioning config:type="list">
      <drive>
        <device>/dev/sda</device>
        <initialize config:type="boolean">true</initialize>
        <partitions config:type="list">
          <partition>
            <filesystem config:type="symbol">swap</filesystem>
            <format config:type="boolean">true</format>
            <loop_fs config:type="boolean">false</loop_fs>
            <mount>swap</mount>
            <partition_id config:type="integer">130</partition_id>
            <partition_type>primary</partition_type>
            <size>2G</size>
          </partition>
          <partition>
            <filesystem config:type="symbol">reiser</filesystem>
            <format config:type="boolean">true</format>
            <fstopt>data=journal,acl</fstopt>
            <loop_fs config:type="boolean">false</loop_fs>
            <mount>/boot</mount>
            <mountby config:type="symbol">device</mountby>
            <noauto config:type="boolean">false</noauto>
            <partition_id config:type="integer">131</partition_id>
            <partition_type>primary</partition_type>
            <size>128M</size>
          </partition>
          <partition>
            <filesystem config:type="symbol">reiser</filesystem>
            <format config:type="boolean">true</format>
            <fstopt>data=journal,acl</fstopt>
            <loop_fs config:type="boolean">false</loop_fs>
            <mount>/</mount>
            <mountby config:type="symbol">device</mountby>
            <noauto config:type="boolean">false</noauto>
            <partition_id config:type="integer">131</partition_id>
            <partition_type>primary</partition_type>
            <size>4G</size>
          </partition>
          <partition>
            <filesystem config:type="symbol">reiser</filesystem>
            <format config:type="boolean">true</format>
            <fstopt>data=journal,acl</fstopt>
            <loop_fs config:type="boolean">false</loop_fs>
            <mount>/var</mount>
            <mountby config:type="symbol">device</mountby>
            <noauto config:type="boolean">false</noauto>
            <partition_id config:type="integer">131</partition_id>
            <size>8G</size>
          </partition>
          <partition>
            <filesystem config:type="symbol">reiser</filesystem>
            <format config:type="boolean">true</format>
            <fstopt>data=journal,acl</fstopt>
            <loop_fs config:type="boolean">false</loop_fs>
            <mount>/usr</mount>
            <mountby config:type="symbol">device</mountby>
            <noauto config:type="boolean">false</noauto>
            <partition_id config:type="integer">131</partition_id>
            <size>8G</size>
          </partition>
          <partition>
            <filesystem config:type="symbol">reiser</filesystem>
            <format config:type="boolean">true</format>
            <fstopt>data=journal,acl</fstopt>
            <loop_fs config:type="boolean">false</loop_fs>
            <mount>/opt</mount>
            <mountby config:type="symbol">device</mountby>
            <noauto config:type="boolean">false</noauto>
            <partition_id config:type="integer">131</partition_id>
            <size>max</size>
          </partition>
        </partitions>
        <use>all</use>
      </drive>
    </partitioning>
    <report>
      <errors>
        <log config:type="boolean">true</log>
        <show config:type="boolean">true</show>
        <timeout config:type="integer">10</timeout>
      </errors>
      <messages>
        <log config:type="boolean">true</log>
        <show config:type="boolean">false</show>
        <timeout config:type="integer">10</timeout>
      </messages>
      <warnings>
        <log config:type="boolean">true</log>
        <show config:type="boolean">true</show>
        <timeout config:type="integer">10</timeout>
      </warnings>
      <yesno_messages>
        <log config:type="boolean">true</log>
        <show config:type="boolean">true</show>
        <timeout config:type="integer">10</timeout>
      </yesno_messages>
    </report>
    <software>
      <addons config:type="list">
        <addon>Basis-Sound</addon>
        <addon>SuSE-Documentation</addon>
        <addon>Various-Tools</addon>
        <addon>WBEM</addon>
        <addon>X11</addon>
        <addon>YaST2</addon>
        <addon>analyze</addon>
        <addon>HA</addon>
        <addon>Kde-Desktop</addon>
        <addon>Linux-Tools</addon>
        <addon>Base-System</addon>
      </addons>
      <base>default</base>
    </software>
  </install>
</profile>

--===============7077801925692631425==--