-----Original Message----- From: Axel Braun <docb@opensuse.org> Sent: 28 April 2022 14:27 To: arm@lists.opensuse.org Subject: Re: Leap 15.4 build 222.1 hangs

Hello Guillaume

Am Donnerstag, 28. April 2022, 13:52:16 CEST schrieb Guillaume Gardet:

...

...

latest Leap 15.4 beta build on a Raspi 4b, booting net-iso from USB-stick hangs at 'Detecting Hardware'.

Looks like it has issues setting up the (ethernet) network, see: https://paste.opensuse.org/55012704

Is this mee too stupid or something for bugzilla?

I just tried to install Leap 15.4 build 222.1 from NET ISO on uSD card, with WLAN and it just prompted for SSID and WPA key, as expected, and I went through the installer steps properly and it is installing packages. Once it finished, I will retry with an Ethernet connection instead of WLAN.

You are installing to the same uSD card you are booting from? That works? Please try with a USB stick!

I boot from uSD card and install to USB stick. I will try to boot NET ISO from USB. What is the size of the RAM of your Pi4? Mine is 8GB. Guillaume

I tried the DVD version with WLAN as well, looks like the network is not the issue. I have added two more pictures: Current error messages: https://paste.opensuse.org/21966847

root file system: https://paste.opensuse.org/40225169

Cheers Axel

IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

After multiple tests, I think I have identified the issue. Please boot the NET ISO and once on grub interface, 'Installation' is highlighted, press 'e' (for edit mode) and add 'console=tty' at the end of the linux line. Finally, boot with ctrl-x. This will fix the console used to show the interface and you will see the dialog to enter the wlan SSID and if you want to skip it, just press 'escape' key and it will fallback to eth0. Let me know if it works for you. Cheers, Guillaume

-----Original Message----- From: Axel Braun <docb@opensuse.org> Sent: 28 April 2022 14:35 To: arm@lists.opensuse.org Subject: Re: Leap 15.4 build 222.1 hangs

Am Donnerstag, 28. April 2022, 14:33:48 CEST schrieb Guillaume Gardet:

...

What is the size of the RAM of your Pi4? Mine is 8GB.

2GB (by purpose) IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

-----Original Message----- From: Axel Braun <docb@opensuse.org> Sent: 28 April 2022 16:59 To: arm@lists.opensuse.org Subject: Re: Leap 15.4 build 222.1 hangs

Hi Guillaume,

Am Donnerstag, 28. April 2022, 16:12:58 CEST schrieben Sie:

...

Please boot the NET ISO and once on grub interface, 'Installation' is highlighted, press 'e' (for edit mode) and add 'console=tty' at the end of the linux line. Finally, boot with ctrl-x.

I ran this on the DVD, and this fixed the whole boot process, which continued in graphics mode!

Dont know what the issue behind is, but I feel it needs to be fixed...

Please create a bug report. I suspect u-boot does not pass the right default console. Guillaume

Thanks Axel

IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.