[opensuse-arm] How to use Rapsberry Pi Factory image headless
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... on a headless system. When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Freek de Kruijf wrote:
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... on a headless system.
When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up.
So, the main problem is that the 280.1 image is broken and doesn't boot. It hangs at 'Starting kernel ...' after loading u-boot. The last image I tried headless was 266.3, and for that one I didn't need to do anything special. The YaST Firstboot stuff was disabled, so it went directly to a login prompt - and ssh was running. -ARA -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op zaterdag 14 maart 2015 14:13:56 schreef Alex Armstrong:
Freek de Kruijf wrote:
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Ra spberryPi:/upstream/images/ on a headless system.
When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up.
So, the main problem is that the 280.1 image is broken and doesn't boot. It hangs at 'Starting kernel ...' after loading u-boot. The last image I tried headless was 266.3, and for that one I didn't need to do anything special. The YaST Firstboot stuff was disabled, so it went directly to a login prompt - and ssh was running.
I tried the latest, Build304.7 from April 17, but still the same problem. I don't have a working Ethernet connection. Is someone having the 266.3 and able to send it to me? Or is there something to circumvent this problem? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op woensdag 22 april 2015 18:10:50 schreef Freek de Kruijf:
Op zaterdag 14 maart 2015 14:13:56 schreef Alex Armstrong:
Freek de Kruijf wrote:
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/ Ra spberryPi:/upstream/images/ on a headless system.
When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up.
So, the main problem is that the 280.1 image is broken and doesn't boot. It hangs at 'Starting kernel ...' after loading u-boot. The last image I tried headless was 266.3, and for that one I didn't need to do anything special. The YaST Firstboot stuff was disabled, so it went directly to a login prompt - and ssh was running.
I tried the latest, Build304.7 from April 17, but still the same problem. I don't have a working Ethernet connection. Is someone having the 266.3 and able to send it to me? Or is there something to circumvent this problem?
This one is definitely faulty. When after xzcat I mount lxroot and do "ls -l etc/" I get like the following: -????????? ? ? ? ? ? aliases d????????? ? ? ? ? ? aliases.d d????????? ? ? ? ? ? alternatives -????????? ? ? ? ? ? bash.bashrc d????????? ? ? ? ? ? bash_completion.d I also tried Build293.7 from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... which also does not give me ssh access, because Ethernet does not come up. At least this one does not have the faulty etc/ folder. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Am 22.04.2015 um 18:51 schrieb Freek de Kruijf <freek@opensuse.org>:
Op woensdag 22 april 2015 18:10:50 schreef Freek de Kruijf:
Op zaterdag 14 maart 2015 14:13:56 schreef Alex Armstrong:
Freek de Kruijf wrote:
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/ Ra spberryPi:/upstream/images/ on a headless system.
When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up.
So, the main problem is that the 280.1 image is broken and doesn't boot. It hangs at 'Starting kernel ...' after loading u-boot. The last image I tried headless was 266.3, and for that one I didn't need to do anything special. The YaST Firstboot stuff was disabled, so it went directly to a login prompt - and ssh was running.
I tried the latest, Build304.7 from April 17, but still the same problem. I don't have a working Ethernet connection. Is someone having the 266.3 and able to send it to me? Or is there something to circumvent this problem?
This one is definitely faulty. When after xzcat I mount lxroot and do "ls -l etc/" I get like the following: -????????? ? ? ? ? ? aliases d????????? ? ? ? ? ? aliases.d d????????? ? ? ? ? ? alternatives -????????? ? ? ? ? ? bash.bashrc d????????? ? ? ? ? ? bash_completion.d
I also tried Build293.7 from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... which also does not give me ssh access, because Ethernet does not come up. At least this one does not have the faulty etc/ folder.
Is anyone interested in working on openQA support for serial port and those boards? I think that's the only sensible way forward to ensure we don't keep breaking random machines. Alex
-- fr.gr.
member openSUSE Freek de Kruijf
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Alexander Graf wrote:
Am 22.04.2015 um 18:51 schrieb Freek de Kruijf <freek@opensuse.org>:
Op woensdag 22 april 2015 18:10:50 schreef Freek de Kruijf:
Op zaterdag 14 maart 2015 14:13:56 schreef Alex Armstrong:
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/ Ra spberryPi:/upstream/images/ on a headless system.
When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up. So, the main problem is that the 280.1 image is broken and doesn't boot. It hangs at 'Starting kernel ...' after loading u-boot. The last image I tried headless was 266.3, and for that one I didn't need to do anything special. The YaST Firstboot stuff was disabled, so it went
Freek de Kruijf wrote: directly to a login prompt - and ssh was running. I tried the latest, Build304.7 from April 17, but still the same problem. I don't have a working Ethernet connection. Is someone having the 266.3 and able to send it to me? Or is there something to circumvent this problem? This one is definitely faulty. When after xzcat I mount lxroot and do "ls -l etc/" I get like the following: -????????? ? ? ? ? ? aliases d????????? ? ? ? ? ? aliases.d d????????? ? ? ? ? ? alternatives -????????? ? ? ? ? ? bash.bashrc d????????? ? ? ? ? ? bash_completion.d
I also tried Build293.7 from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... which also does not give me ssh access, because Ethernet does not come up. At least this one does not have the faulty etc/ folder. Is anyone interested in working on openQA support for serial port and those boards? I think that's the only sensible way forward to ensure we don't keep breaking random machines.
Alex
Well, I know nothing about openQA, but I am interested in working images. If you point me in the right direction I'll take a look at it. The openqa.opensuse.org landing page is a bit sparse. -Alex A.
-- fr.gr.
member openSUSE Freek de Kruijf
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 23.04.15 01:40, Alex Armstrong wrote:
Alexander Graf wrote:
Am 22.04.2015 um 18:51 schrieb Freek de Kruijf <freek@opensuse.org>:
Op woensdag 22 april 2015 18:10:50 schreef Freek de Kruijf:
Op zaterdag 14 maart 2015 14:13:56 schreef Alex Armstrong:
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/ Ra spberryPi:/upstream/images/ on a headless system.
When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up. So, the main problem is that the 280.1 image is broken and doesn't boot. It hangs at 'Starting kernel ...' after loading u-boot. The last image I tried headless was 266.3, and for that one I didn't need to do anything special. The YaST Firstboot stuff was disabled, so it went
Freek de Kruijf wrote: directly to a login prompt - and ssh was running. I tried the latest, Build304.7 from April 17, but still the same problem. I don't have a working Ethernet connection. Is someone having the 266.3 and able to send it to me? Or is there something to circumvent this problem? This one is definitely faulty. When after xzcat I mount lxroot and do "ls -l etc/" I get like the following: -????????? ? ? ? ? ? aliases d????????? ? ? ? ? ? aliases.d d????????? ? ? ? ? ? alternatives -????????? ? ? ? ? ? bash.bashrc d????????? ? ? ? ? ? bash_completion.d
I also tried Build293.7 from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... which also does not give me ssh access, because Ethernet does not come up. At least this one does not have the faulty etc/ folder. Is anyone interested in working on openQA support for serial port and those boards? I think that's the only sensible way forward to ensure we don't keep breaking random machines.
Alex
Well, I know nothing about openQA, but I am interested in working images. If you point me in the right direction I'll take a look at it. The openqa.opensuse.org landing page is a bit sparse.
I agree that it's seriously lacking a proper web page, but it's the tool of choice for openSUSE automated testing. I can certainly put up a small test farm with all the board types we have lying around if someone else takes care of making openQA work with them and writes the test cases. The github repository is at https://github.com/os-autoinst/openQA where you should hopefully also find some documentation. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Freek de Kruijf wrote:
Op woensdag 22 april 2015 18:10:50 schreef Freek de Kruijf:
Op zaterdag 14 maart 2015 14:13:56 schreef Alex Armstrong:
I tried to use openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1- Build280.1.raw.xz from http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/ Ra spberryPi:/upstream/images/ on a headless system.
When using the 13.2 image I have to remove the file /var/lib/YaST2/reconfig_system and the system boots and I can log in via ssh. However the image above does not have such a file and I don't see the Ethernet interface coming up. So, the main problem is that the 280.1 image is broken and doesn't boot. It hangs at 'Starting kernel ...' after loading u-boot. The last image I tried headless was 266.3, and for that one I didn't need to do anything special. The YaST Firstboot stuff was disabled, so it went
Freek de Kruijf wrote: directly to a login prompt - and ssh was running. I tried the latest, Build304.7 from April 17, but still the same problem. I don't have a working Ethernet connection. Is someone having the 266.3 and able to send it to me? Or is there something to circumvent this problem? This one is definitely faulty. When after xzcat I mount lxroot and do "ls -l etc/" I get like the following: -????????? ? ? ? ? ? aliases d????????? ? ? ? ? ? aliases.d d????????? ? ? ? ? ? alternatives -????????? ? ? ? ? ? bash.bashrc d????????? ? ? ? ? ? bash_completion.d
I also tried Build293.7 from: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Rasp... which also does not give me ssh access, because Ethernet does not come up. At least this one does not have the faulty etc/ folder.
Hi, Dirk Muller posted a patch to the opensuse-kernel list that fixes the kernel boot hang. But it seems that it hasn't been merged into Factory yet, and so our kiwi images are still broken. I'm not sure who to ping to hurry this up. I do have a copy of Build-266.3 which I could upload somewhere - it's 170MB xz compressed. -Alex A. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (3)
-
Alex Armstrong
-
Alexander Graf
-
Freek de Kruijf