[opensuse-arm] Beaglebone black with no HDMI output

newer
[opensuse-arm] iMX USB Loader tool...

Alexjan Carraturo

11 Oct 2014 11 Oct '14

18:48

Hi to all I try to setup openSUSE 13.1 on my Beaglebone Black. I follow the procedure described in this page: https://en.opensuse.org/HCL:BeagleBone_Black I choose the XFCE image (openSUSE-13.1-ARM-XFCE-beaglebone.armv7l-1.12.1-Build40.18). This works and it's cool; easy and powerful. The system start, and the yast configuration works (via serial console). But, even if the system seems to be perfectly working and the hdmi cable it`s connected to monitor, the monitor said me "No Signal" Someone have advice to let the monitor hdmi work correctly? I tried another image (openSUSE-Factory-ARM-E17-beaglebone.armv7l-1.12.1-Build224.4) but this doesn't boot and stops here Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 2261 bytes read in 14 ms (157.2 KiB/s) Running bootscript from mmc0 ... ## Executing script at 82000000 switch to partitions #0, OK mmc0 is current device 5575752 bytes read in 353 ms (15.1 MiB/s) 57450503 bytes read in 3350 ms (16.4 MiB/s) 33138 bytes read in 33 ms (980.5 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x551448 ] ## Loading init Ramdisk from Legacy Image at 88080000 ... Image Name: Initrd Created: 2014-10-10 6:33:40 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 57450439 Bytes = 54.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b171 Starting kernel ... Thanks in advance bye Alexjan -- Alexjan Carraturo -- Twitter/Facebook/Identica/flickr: axjslack Personal site: http://axjslack.wordpress.com -- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Show replies by thread

Sebastian Kratz

11 Oct 11 Oct

18:58

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 On 10/11/2014 08:48 PM, Alexjan Carraturo wrote:

...

Someone have advice to let the monitor hdmi work correctly?

if you havn't connected or disabled keyboard/mouse the beagle will go into powersaving which also disables hdmi. try connecting the monitor and do echo 0 > /sys/class/graphics/fb0/blank otherwise, many people have reported issues with hdmi on the beaglebone: http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI#HDMI_Issues see also tested aka supported monitors: http://elinux.org/Beagleboard:BeagleBone_Black_Accessories#Monitors_and_Reso... - -- Sebastian Kratz @ProhtMeyhet -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAEBCgAGBQJUOX3rAAoJEPy7f1qF9ovT2jIQALfzitAPITqHnnsq2gmvO07k nqJQ6J97OlrDGZ3BWGZ+rqiSnWmysO+/nPyO758Ot4RFkiRbvEWqXFzRLpvTdc4c PQ+4TgfiVsZpHWb8OsA/K7UZp3a/w4t/q053rz/V1/irHo8DOE3QANw+pR/AMmXy 0MwkOJgQVRaNRSvW/otBFpqw/6hpgbCbuyeGCGmG/OxcZsO+PW9aDAlp+1QnoQgh TDtnHrbHgIvgKZaxorNtcA0/vfWJ5neXIM2RlK9p2129NsuoWG1lg9KeAdBB1QVA U7HseiMxiEceS/PEl9J8tgxa0P1Ol82CC2tHqlhqBWGwGK5izBhImz39GS+ZzMhl 0xaa9vCkUt7QcF4h2iIrycaKFkHUrBLhFWd2xtfqieNFAeIOcFuBsOygFGSnTjGD o7q60187kHqgt+gX8I+cOcPRCvx0XObvqtAiFLjKjbr0wA3BSA3mpt1YDicLaLW7 ze2y4wXRIwW3P+1a8zlS4MN6D69YRRrifSsmrdHpXq0MR1610eY4EE0XYKfSltXL S79WUhv15NittgO8LtTi9O6em0tCYGeY3AcBZIQ5x6vyiQ9LZabOuisQ9sWNnUhE We03ZRiaRiHk7cFsDQOD7DmqAkqBAqaFovvvki6hYCfwon0qE3xwE1/erLKcLqEL 2th3nGMYEHdcDiD80aqz =E582 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Alexjan Carraturo

22:28

2014-10-11 20:58 GMT+02:00 Sebastian Kratz :

...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512

On 10/11/2014 08:48 PM, Alexjan Carraturo wrote:

...
Someone have advice to let the monitor hdmi work correctly?

First of all, thanks Sebastian for your answer.

...

if you havn't connected or disabled keyboard/mouse the beagle will go into powersaving which also disables hdmi. try connecting the monitor and do

echo 0 > /sys/class/graphics/fb0/blank

I've tried, but no changes.

...

otherwise, many people have reported issues with hdmi on the beaglebone:

http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI#HDMI_Issues

see also tested aka supported monitors:

http://elinux.org/Beagleboard:BeagleBone_Black_Accessories#Monitors_and_Reso...

I read this links, and I found interesting but 1) I don't understand the reason to ask a power supply grounded (there is no ground on board plug) and that have to be the same ground of the monitor. 2) My monitor it's a common LG 42'' inches TV. I don't think that the problem is the cable or the power adapter and not the screen too. I think in that way because the same board, with the same cable, with the same power adapter, on the same TV, but with a different OS (Fedora 20) was able to show on screen KDE 4 (slow, sure, but visible). I don't know if is a software problem, and if other guys have their beaglebone black up & running with HDMI working, I have to think that is a mixed issue (hw & sw). Anyway, any advice or user experience are welcome. Thanks in advance regards Alexjan

...

- -- Sebastian Kratz @ProhtMeyhet -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux)

iQIcBAEBCgAGBQJUOX3rAAoJEPy7f1qF9ovT2jIQALfzitAPITqHnnsq2gmvO07k nqJQ6J97OlrDGZ3BWGZ+rqiSnWmysO+/nPyO758Ot4RFkiRbvEWqXFzRLpvTdc4c PQ+4TgfiVsZpHWb8OsA/K7UZp3a/w4t/q053rz/V1/irHo8DOE3QANw+pR/AMmXy 0MwkOJgQVRaNRSvW/otBFpqw/6hpgbCbuyeGCGmG/OxcZsO+PW9aDAlp+1QnoQgh TDtnHrbHgIvgKZaxorNtcA0/vfWJ5neXIM2RlK9p2129NsuoWG1lg9KeAdBB1QVA U7HseiMxiEceS/PEl9J8tgxa0P1Ol82CC2tHqlhqBWGwGK5izBhImz39GS+ZzMhl 0xaa9vCkUt7QcF4h2iIrycaKFkHUrBLhFWd2xtfqieNFAeIOcFuBsOygFGSnTjGD o7q60187kHqgt+gX8I+cOcPRCvx0XObvqtAiFLjKjbr0wA3BSA3mpt1YDicLaLW7 ze2y4wXRIwW3P+1a8zlS4MN6D69YRRrifSsmrdHpXq0MR1610eY4EE0XYKfSltXL S79WUhv15NittgO8LtTi9O6em0tCYGeY3AcBZIQ5x6vyiQ9LZabOuisQ9sWNnUhE We03ZRiaRiHk7cFsDQOD7DmqAkqBAqaFovvvki6hYCfwon0qE3xwE1/erLKcLqEL 2th3nGMYEHdcDiD80aqz =E582 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

-- Alexjan Carraturo -- Twitter/Facebook/Identica/flickr: axjslack Personal site: http://axjslack.wordpress.com -- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

lists

23:51

On Sun, 12 Oct 2014 00:28:29 +0200 Alexjan Carraturo wrote:

...

2014-10-11 20:58 GMT+02:00 Sebastian Kratz :

...
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512

On 10/11/2014 08:48 PM, Alexjan Carraturo wrote:

...
Someone have advice to let the monitor hdmi work correctly?

First of all, thanks Sebastian for your answer.

...
if you havn't connected or disabled keyboard/mouse the beagle will go into powersaving which also disables hdmi. try connecting the monitor and do

echo 0 > /sys/class/graphics/fb0/blank

I've tried, but no changes.

...
otherwise, many people have reported issues with hdmi on the beaglebone:

http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI#HDMI_Issues

see also tested aka supported monitors:

http://elinux.org/Beagleboard:BeagleBone_Black_Accessories#Monitors_and_Reso...

I read this links, and I found interesting but 1) I don't understand the reason to ask a power supply grounded (there is no ground on board plug) and that have to be the same ground of the monitor. 2) My monitor it's a common LG 42'' inches TV. I don't think that the problem is the cable or the power adapter and not the screen too. I think in that way because the same board, with the same cable, with the same power adapter, on the same TV, but with a different OS (Fedora 20) was able to show on screen KDE 4 (slow, sure, but visible).

I don't know if is a software problem, and if other guys have their beaglebone black up & running with HDMI working, I have to think that is a mixed issue (hw & sw).

Anyway, any advice or user experience are welcome. Thanks in advance regards Alexjan

...
- -- Sebastian Kratz @ProhtMeyhet

I've got a BBB and am downloading the file at the moment. My board has run opensuse JEOS in the past so this should be a good test. [Given my limited skill set, this is about all I can do to contribute. ;-) ] I noticed there is no sha256 for the XFCE disty. Maybe the file isn't good. FWIW, my HDMI cable is plugged into a DVI converter and KVM before going to my monitor. I doubt it makes a difference, but when you chase bugs, you need to be specific. I'm on DSL so see ya in a few hours. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

lists

12 Oct 12 Oct

09:29

On Sat, 11 Oct 2014 16:51:39 -0700 lists wrote:

...

On Sun, 12 Oct 2014 00:28:29 +0200 Alexjan Carraturo wrote:

...
2014-10-11 20:58 GMT+02:00 Sebastian Kratz :

...
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512

On 10/11/2014 08:48 PM, Alexjan Carraturo wrote:

...
Someone have advice to let the monitor hdmi work correctly?

First of all, thanks Sebastian for your answer.

...
if you havn't connected or disabled keyboard/mouse the beagle will go into powersaving which also disables hdmi. try connecting the monitor and do

echo 0 > /sys/class/graphics/fb0/blank

I've tried, but no changes.

...
otherwise, many people have reported issues with hdmi on the beaglebone:

http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI#HDMI_Issues

see also tested aka supported monitors:

http://elinux.org/Beagleboard:BeagleBone_Black_Accessories#Monitors_and_Reso...

I read this links, and I found interesting but 1) I don't understand the reason to ask a power supply grounded (there is no ground on board plug) and that have to be the same ground of the monitor. 2) My monitor it's a common LG 42'' inches TV. I don't think that the problem is the cable or the power adapter and not the screen too. I think in that way because the same board, with the same cable, with the same power adapter, on the same TV, but with a different OS (Fedora 20) was able to show on screen KDE 4 (slow, sure, but visible).

I don't know if is a software problem, and if other guys have their beaglebone black up & running with HDMI working, I have to think that is a mixed issue (hw & sw).

Anyway, any advice or user experience are welcome. Thanks in advance regards Alexjan

...
- -- Sebastian Kratz @ProhtMeyhet

I've got a BBB and am downloading the file at the moment. My board has run opensuse JEOS in the past so this should be a good test. [Given my limited skill set, this is about all I can do to contribute. ;-) ]

I noticed there is no sha256 for the XFCE disty. Maybe the file isn't good.

FWIW, my HDMI cable is plugged into a DVI converter and KVM before going to my monitor. I doubt it makes a difference, but when you chase bugs, you need to be specific.

I'm on DSL so see ya in a few hours.

I can confirm there is no graphics on the HDMI port as the original poster indicated. The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Matwey V. Kornilov

12:33

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

12.10.2014 13:29, lists пишет:

...

I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific.

I would recommend to try 13.2/Factory. But, surprisingly, It is broken again. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Andreas Färber

17:35

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

Am 12.10.2014 um 14:33 schrieb Matwey V. Kornilov:

...

12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific.

I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

Does the BBB despite AMxxxx require the omap drm we had to disable a while back due to build errors? Has that been fixed and reenabled again? Cheers, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

lists

17:43

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

On Sun, 12 Oct 2014 16:33:28 +0400 "Matwey V. Kornilov" wrote:

...

12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific.

I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

Did you mean 13.1? I'm downloading openSUSE-13.1-ARM-JeOS-beaglebone.armv7l-1.12.1-Build38.9.raw.xz Might as well verify if it works. JEOS also can use the HDMI port, but only like a dumb terminal. For my purposes, I don't use the HDMI port anyway. I just loaded the XFCE disty to verify the OP was correct. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Guillaume Gardet

13 Oct 13 Oct

06:27

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

Hi, Le 12/10/2014 14:33, Matwey V. Kornilov a écrit :

...

12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific. I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

What is broken? HDMI or boot? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Alexjan Carraturo

07:00

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

I tested booth, and the 13.1 has only HDMI problem, but Factory stops himselfs in "Starting Kernel". (for me). 2014-10-13 8:27 GMT+02:00 Guillaume Gardet :

...

Hi,

Le 12/10/2014 14:33, Matwey V. Kornilov a écrit :

...
12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific.

I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

What is broken? HDMI or boot?

Guillaume

-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Matwey V. Kornilov

07:18

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

On 12.10.2014 21:43, lists wrote:

...

On Sun, 12 Oct 2014 16:33:28 +0400 "Matwey V. Kornilov" wrote:

...
12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific.

I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

Did you mean 13.1?

I meant Factory, the upcoming release. http://download.opensuse.org/ports/armv7hl/factory/images/ -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

lists

07:19

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

On Mon, 13 Oct 2014 08:27:21 +0200 Guillaume Gardet wrote:

...

Hi,

Le 12/10/2014 14:33, Matwey V. Kornilov a écrit :

...
12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific. I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

What is broken? HDMI or boot?

Guillaume

It (XFCE version as stated previously) boots/runs just fine. No HDMI. I verified the HDMI port itself was working with Ubuntu before testing opensuse. I couldn't change the time/date when running the ncurses yast initial set up. It could be I wasn't doing something correctly, but this would be worth checking out. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Matwey V. Kornilov

07:20

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

On 12.10.2014 21:35, Andreas Färber wrote:

...

Am 12.10.2014 um 14:33 schrieb Matwey V. Kornilov:

...
12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific.

I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

Does the BBB despite AMxxxx require the omap drm we had to disable a while back due to build errors? Has that been fixed and reenabled again?

No, I think this is unrelated to our configuration: https://bugzilla.kernel.org/show_bug.cgi?id=86071 Most probably, the bug is in 3.17.0 as well. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

web5gg

07:21

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

Le 13/10/2014 09:19, lists a écrit :

...

On Mon, 13 Oct 2014 08:27:21 +0200 Guillaume Gardet wrote:

...
Hi,

Le 12/10/2014 14:33, Matwey V. Kornilov a écrit :

...
12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific. I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

What is broken? HDMI or boot?

Guillaume

It (XFCE version as stated previously) boots/runs just fine. No HDMI. I verified the HDMI port itself was working with Ubuntu before testing opensuse.

Which build version? (Available in image name). Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Guillaume Gardet

07:21

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

Le 13/10/2014 09:00, Alexjan Carraturo a écrit :

...

I tested booth, and the 13.1 has only HDMI problem, but Factory stops himselfs in "Starting Kernel". (for me).

Which build version? (Available in image name). Guillaume

...

2014-10-13 8:27 GMT+02:00 Guillaume Gardet :

...
Hi,

Le 12/10/2014 14:33, Matwey V. Kornilov a écrit :

...
12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific. I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

What is broken? HDMI or boot?

Guillaume

-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Matwey V. Kornilov

07:23

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

On 13.10.2014 10:27, Guillaume Gardet wrote:

...

What is broken? HDMI or boot?

Boot. See for reference: https://bugzilla.kernel.org/show_bug.cgi?id=86071 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Matwey V. Kornilov

07:25

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

On 12.10.2014 21:35, Andreas Färber wrote:

...

Am 12.10.2014 um 14:33 schrieb Matwey V. Kornilov:

...
12.10.2014 13:29, lists пишет:

...
I can confirm there is no graphics on the HDMI port as the original poster indicated.

The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific.

I would recommend to try 13.2/Factory. But, surprisingly, It is broken again.

Does the BBB despite AMxxxx require the omap drm we had to disable a while back due to build errors? Has that been fixed and reenabled again?

I think it is not related to our configuration. https://bugzilla.kernel.org/show_bug.cgi?id=86071 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Matwey V. Kornilov

07:33

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

On 13.10.2014 11:00, Alexjan Carraturo wrote:

...

I tested booth, and the 13.1 has only HDMI problem

I bet you did not check usb :) Yes, it is also doesn't work now (see my patches in opensuse-kernel maillist) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

Matwey V. Kornilov

15 Oct 15 Oct

15:29

New subject: [opensuse-arm] Re: Beaglebone black with no HDMI output

13.10.2014 11:23, Matwey V. Kornilov пишет:

...

On 13.10.2014 10:27, Guillaume Gardet wrote:

...
What is broken? HDMI or boot?

Boot. See for reference: https://bugzilla.kernel.org/show_bug.cgi?id=86071

Ok, The patch is in the opensuse-kernel maillist -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

3485

Age (days ago)

3489

Last active (days ago)

List overview

Download

18 comments

7 participants

participants (7)

Alexjan Carraturo
Andreas Färber
Guillaume Gardet
lists
Matwey V. Kornilov
Sebastian Kratz
web5gg