On Thu 16 Aug 2018 23:22:17 NZST +1200, Alexander Graf wrote:
Powerup: Green LED flashes briefly, colourwheel screen shows + disappears, stuck, with screen showing Net: No ethernet found. starting USB... USB0: Core release: 2.80a scanning bus 0 for devices...
This sounds like the U-Boot USB stack is unhappy about something on your USB bus. What devices do you have connected via USB to your RPi3? Can you try to unplug all and see how far you get?
USB mouse and USB keyboard. You're right on the money, without those 2 connected (i.e., no USB devices, no Ethernet and only monitor connected), booting proceeds and initial setup runs (all while the screen is black, bad idea) until the console login prompt shows. It looks like there are some USB keyboards, and then some others. Booting shouldn't hang though. It's a cheap small E-Blue Delgado that I use for initial setups and emergencies. Then I tried a Promate EasyKey-2, and Leap15.0 boots fine with that (and a mouse) connected. However, neither keyboard works during the boot menu (press any key to stop - haha). There are key mapping faults of the E-Blue with raspbian on the console, but not in X11. The Promate is good on the console (no X11 to test). Why does it work with raspbian though? Thanks muchly, Volker -- Volker Kuhlmann http://volker.top.geek.nz/ Please do not CC list postings to me. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org