For 13.2 a downstream USB driver was added (USB_EHCI_HCD_SYNOPSYS)
for the Juno board (boo#902632). With 4.6 that driver no longer builds.
A check of arch/arm64/boot/dts/arm/juno-base.dtsi indicates that it
is using the "generic-ehci" compatible string, i.e. not this driver.
Therefore drop these patches:
patches.arch/arm64-0001-usb-Add-support-for-Synopsis-H20AHB-EHCI-host-contro.patch
patches.arch/arm64-0002-usb-fix-hcd-h20ahb-driver-depends.patch
Cc: Alexander Graf
Cc: Andreas Schwab
Signed-off-by: Andreas Färber
---
config/arm64/default | 1 -
config/armv6hl/default | 1 -
config/armv7hl/default | 1 -
config/armv7hl/lpae | 1 -
config/i386/debug | 1 -
config/i386/default | 1 -
config/i386/pae | 1 -
config/ppc64/debug | 1 -
config/ppc64/default | 1 -
config/ppc64le/debug | 1 -
config/ppc64le/default | 1 -
config/x86_64/debug | 1 -
config/x86_64/default | 1 -
...port-for-Synopsis-H20AHB-EHCI-host-contro.patch | 398 ---------------------
...64-0002-usb-fix-hcd-h20ahb-driver-depends.patch | 37 --
series.conf | 2 -
16 files changed, 450 deletions(-)
delete mode 100644 patches.arch/arm64-0001-usb-Add-support-for-Synopsis-H20AHB-EHCI-host-contro.patch
delete mode 100644 patches.arch/arm64-0002-usb-fix-hcd-h20ahb-driver-depends.patch
diff --git a/config/arm64/default b/config/arm64/default
index d923ab1..ee5f798 100644
--- a/config/arm64/default
+++ b/config/arm64/default
@@ -5426,7 +5426,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-CONFIG_USB_EHCI_HCD_SYNOPSYS=m
CONFIG_USB_EHCI_MSM=m
CONFIG_USB_EHCI_TEGRA=m
CONFIG_USB_EHCI_EXYNOS=m
diff --git a/config/armv6hl/default b/config/armv6hl/default
index b7f8612..094e994 100644
--- a/config/armv6hl/default
+++ b/config/armv6hl/default
@@ -4493,7 +4493,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_MXC=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
# CONFIG_USB_CNS3XXX_EHCI is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
diff --git a/config/armv7hl/default b/config/armv7hl/default
index 64c4f97..fed88b9 100644
--- a/config/armv7hl/default
+++ b/config/armv7hl/default
@@ -6146,7 +6146,6 @@ CONFIG_USB_EHCI_HCD_OMAP=m
CONFIG_USB_EHCI_HCD_ORION=m
CONFIG_USB_EHCI_HCD_SPEAR=m
CONFIG_USB_EHCI_HCD_STI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_MSM=m
CONFIG_USB_EHCI_TEGRA=m
CONFIG_USB_EHCI_EXYNOS=m
diff --git a/config/armv7hl/lpae b/config/armv7hl/lpae
index 9bc44e7..0faf45d 100644
--- a/config/armv7hl/lpae
+++ b/config/armv7hl/lpae
@@ -5864,7 +5864,6 @@ CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_EHCI_MXC is not set
CONFIG_USB_EHCI_HCD_OMAP=m
CONFIG_USB_EHCI_HCD_ORION=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_MSM=m
CONFIG_USB_EHCI_TEGRA=m
CONFIG_USB_EHCI_EXYNOS=m
diff --git a/config/i386/debug b/config/i386/debug
index 0a42eae..d157ad1 100644
--- a/config/i386/debug
+++ b/config/i386/debug
@@ -5928,7 +5928,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
diff --git a/config/i386/default b/config/i386/default
index e114369..92a85d3 100644
--- a/config/i386/default
+++ b/config/i386/default
@@ -5968,7 +5968,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
diff --git a/config/i386/pae b/config/i386/pae
index ffe36bb..4b36354 100644
--- a/config/i386/pae
+++ b/config/i386/pae
@@ -5779,7 +5779,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
diff --git a/config/ppc64/debug b/config/ppc64/debug
index abcb4dc..dfa87c2 100644
--- a/config/ppc64/debug
+++ b/config/ppc64/debug
@@ -4986,7 +4986,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
diff --git a/config/ppc64/default b/config/ppc64/default
index b7c3465..5cdad76 100644
--- a/config/ppc64/default
+++ b/config/ppc64/default
@@ -4975,7 +4975,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
diff --git a/config/ppc64le/debug b/config/ppc64le/debug
index 5c17e73..22ca4d2 100644
--- a/config/ppc64le/debug
+++ b/config/ppc64le/debug
@@ -4842,7 +4842,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
diff --git a/config/ppc64le/default b/config/ppc64le/default
index faf4f74..c84816a 100644
--- a/config/ppc64le/default
+++ b/config/ppc64le/default
@@ -4831,7 +4831,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
diff --git a/config/x86_64/debug b/config/x86_64/debug
index eefffdb..65c9fbe 100644
--- a/config/x86_64/debug
+++ b/config/x86_64/debug
@@ -5756,7 +5756,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
diff --git a/config/x86_64/default b/config/x86_64/default
index ee88fba..d45e292 100644
--- a/config/x86_64/default
+++ b/config/x86_64/default
@@ -5741,7 +5741,6 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
-# CONFIG_USB_EHCI_HCD_SYNOPSYS is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
diff --git a/patches.arch/arm64-0001-usb-Add-support-for-Synopsis-H20AHB-EHCI-host-contro.patch b/patches.arch/arm64-0001-usb-Add-support-for-Synopsis-H20AHB-EHCI-host-contro.patch
deleted file mode 100644
index d80f8de..0000000
--- a/patches.arch/arm64-0001-usb-Add-support-for-Synopsis-H20AHB-EHCI-host-contro.patch
+++ /dev/null
@@ -1,398 +0,0 @@
-From e6f7fd6d35443f2efebe940e37237b1ad18d3a79 Mon Sep 17 00:00:00 2001
-From: Liviu Dudau
-Date: Tue, 4 Mar 2014 11:03:13 +0000
-Subject: [PATCH 01/10] usb: Add support for Synopsis H20AHB EHCI host
- controller.
-Patch-mainline: No
-References: bnc#902632
-
-Signed-off-by: Liviu Dudau
-Signed-off-by: Alexander Graf
-
----
- drivers/usb/host/Kconfig | 7 +
- drivers/usb/host/Makefile | 1 +
- drivers/usb/host/ehci-h20ahb.c | 341 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 349 insertions(+)
- create mode 100644 drivers/usb/host/ehci-h20ahb.c
-
-diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
-index a8a30b1..4aa17fa 100644
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -188,6 +188,13 @@ config USB_EHCI_HCD_STI
- Enable support for the on-chip EHCI controller found on
- STMicroelectronics consumer electronics SoC's.
-
-+config USB_EHCI_HCD_SYNOPSYS
-+ tristate "Support for Synopsys Host-AHB USB 2.0 controller"
-+ depends on USB_EHCI_HCD
-+ ---help---
-+ Enable support for onchip USB controllers based on DesignWare USB 2.0
-+ Host-AHB Controller IP from Synopsys.
-+
- config USB_EHCI_HCD_AT91
- tristate "Support for Atmel on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && ARCH_AT91
-diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
-index 348c243..cfcae6f 100644
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
- obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o
- obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o
- obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o
-+obj-$(CONFIG_USB_EHCI_HCD_SYNOPSYS) += ehci-h20ahb.o
- obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
- obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
- obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
-diff --git a/drivers/usb/host/ehci-h20ahb.c b/drivers/usb/host/ehci-h20ahb.c
-new file mode 100644
-index 0000000..3ee3c7a
---- /dev/null
-+++ b/drivers/usb/host/ehci-h20ahb.c
-@@ -0,0 +1,341 @@
-+/*
-+ * Copyright (C) 2007-2013 Texas Instruments, Inc.
-+ * Author: Vikram Pandita
-+ * Author: Anand Gadiyar
-+ * Author: Keshava Munegowda
-+ * Author: Roger Quadros
-+ *
-+ * Copyright (C) 2009 Nokia Corporation
-+ * Contact: Felipe Balbi
-+ *
-+ * Based on ehci-omap.c - driver for USBHOST on OMAP3/4 processors
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ *
-+ */
-+
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+#include
-+
-+#include "ehci.h"
-+
-+#define H20AHB_HS_USB_PORTS 1
-+
-+/* EHCI Synopsys-specific Register Set */
-+#define EHCI_INSNREG04 (0xA0)
-+#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
-+#define EHCI_INSNREG05_ULPI (0xA4)
-+#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
-+#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
-+#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
-+#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
-+#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
-+#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
-+
-+#define DRIVER_DESC "H20AHB-EHCI Host Controller driver"
-+
-+static const char hcd_name[] = "ehci-h20ahb";
-+
-+/*-------------------------------------------------------------------------*/
-+
-+struct h20ahb_hcd {
-+ struct usb_phy *phy[H20AHB_HS_USB_PORTS]; /* one PHY for each port */
-+ int nports;
-+};
-+
-+static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
-+{
-+ __raw_writel(val, base + reg);
-+}
-+
-+static inline u32 ehci_read(void __iomem *base, u32 reg)
-+{
-+ return __raw_readl(base + reg);
-+}
-+
-+/* configure so an HC device and id are always provided */
-+/* always called with process context; sleeping is OK */
-+
-+static struct hc_driver __read_mostly ehci_h20ahb_hc_driver;
-+
-+static const struct ehci_driver_overrides ehci_h20ahb_overrides __initdata = {
-+ .extra_priv_size = sizeof(struct h20ahb_hcd),
-+};
-+
-+static int ehci_h20ahb_phy_read(struct usb_phy *x, u32 reg)
-+{
-+ u32 val = (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |
-+ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |
-+ (3 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |
-+ (reg << EHCI_INSNREG05_ULPI_REGADD_SHIFT);
-+ ehci_write(x->io_priv, 0, val);
-+ while ((val = ehci_read(x->io_priv, 0)) &
-+ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT));
-+ return val & 0xff;
-+}
-+
-+static int ehci_h20ahb_phy_write(struct usb_phy *x, u32 val, u32 reg)
-+{
-+ u32 v = (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |
-+ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |
-+ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |
-+ (reg << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |
-+ (val & 0xff);
-+ ehci_write(x->io_priv, 0, v);
-+ while ((v = ehci_read(x->io_priv, 0)) &
-+ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT));
-+ return 0;
-+}
-+
-+static struct usb_phy_io_ops ehci_h20ahb_phy_io_ops = {
-+ .read = ehci_h20ahb_phy_read,
-+ .write = ehci_h20ahb_phy_write,
-+};
-+
-+
-+/**
-+ * ehci_hcd_h20ahb_probe - initialize Synopsis-based HCDs
-+ *
-+ * Allocates basic resources for this USB host controller, and
-+ * then invokes the start() method for the HCD associated with it
-+ * through the hotplug entry's driver_data.
-+ */
-+static int ehci_hcd_h20ahb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ struct usb_hcd *hcd;
-+ void __iomem *regs;
-+ int ret;
-+ int irq;
-+ int i;
-+ struct h20ahb_hcd *h20ahb;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ /* if (!dev->parent) {
-+ dev_err(dev, "Missing parent device\n");
-+ return -ENODEV;
-+ }*/
-+
-+ /* For DT boot, get platform data from parent. i.e. usbhshost */
-+ /*if (dev->of_node) {
-+ pdata = dev_get_platdata(dev->parent);
-+ dev->platform_data = pdata;
-+ }
-+
-+ if (!pdata) {
-+ dev_err(dev, "Missing platform data\n");
-+ return -ENODEV;
-+ }*/
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(dev, "EHCI irq failed\n");
-+ return -ENODEV;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ regs = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(regs))
-+ return PTR_ERR(regs);
-+
-+ /*
-+ * Right now device-tree probed devices don't get dma_mask set.
-+ * Since shared usb code relies on it, set it here for now.
-+ * Once we have dma capability bindings this can go away.
-+ */
-+ ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
-+ if (ret)
-+ return ret;
-+
-+ ret = -ENODEV;
-+ hcd = usb_create_hcd(&ehci_h20ahb_hc_driver, dev,
-+ dev_name(dev));
-+ if (!hcd) {
-+ dev_err(dev, "Failed to create HCD\n");
-+ return -ENOMEM;
-+ }
-+
-+ hcd->rsrc_start = res->start;
-+ hcd->rsrc_len = resource_size(res);
-+ hcd->regs = regs;
-+ hcd_to_ehci(hcd)->caps = regs;
-+
-+ h20ahb = (struct h20ahb_hcd *)hcd_to_ehci(hcd)->priv;
-+ h20ahb->nports = 1;
-+
-+ platform_set_drvdata(pdev, hcd);
-+
-+ /* get the PHY devices if needed */
-+ for (i = 0 ; i < h20ahb->nports ; i++) {
-+ struct usb_phy *phy;
-+
-+ /* get the PHY device */
-+#if 0
-+ if (dev->of_node)
-+ phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
-+ else
-+ phy = devm_usb_get_phy_dev(dev, i);
-+#endif
-+ phy = otg_ulpi_create(&ehci_h20ahb_phy_io_ops, 0);
-+ if (IS_ERR(phy)) {
-+ ret = PTR_ERR(phy);
-+ dev_err(dev, "Can't get PHY device for port %d: %d\n",
-+ i, ret);
-+ goto err_phy;
-+ }
-+ phy->dev = dev;
-+ usb_add_phy_dev(phy);
-+
-+ h20ahb->phy[i] = phy;
-+ phy->io_priv = hcd->regs + EHCI_INSNREG05_ULPI;
-+
-+#if 0
-+ usb_phy_init(h20ahb->phy[i]);
-+ /* bring PHY out of suspend */
-+ usb_phy_set_suspend(h20ahb->phy[i], 0);
-+#endif
-+ }
-+
-+ /* make the first port's phy the one used by hcd as well */
-+ hcd->phy = h20ahb->phy[0];
-+
-+ pm_runtime_enable(dev);
-+ pm_runtime_get_sync(dev);
-+
-+ /*
-+ * An undocumented "feature" in the H20AHB EHCI controller,
-+ * causes suspended ports to be taken out of suspend when
-+ * the USBCMD.Run/Stop bit is cleared (for example when
-+ * we do ehci_bus_suspend).
-+ * This breaks suspend-resume if the root-hub is allowed
-+ * to suspend. Writing 1 to this undocumented register bit
-+ * disables this feature and restores normal behavior.
-+ */
-+ ehci_write(regs, EHCI_INSNREG04,
-+ EHCI_INSNREG04_DISABLE_UNSUSPEND);
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
-+ if (ret) {
-+ dev_err(dev, "failed to add hcd with err %d\n", ret);
-+ goto err_pm_runtime;
-+ }
-+ device_wakeup_enable(hcd->self.controller);
-+
-+ /*
-+ * Bring PHYs out of reset for non PHY modes.
-+ * Even though HSIC mode is a PHY-less mode, the reset
-+ * line exists between the chips and can be modelled
-+ * as a PHY device for reset control.
-+ */
-+ for (i = 0; i < h20ahb->nports; i++) {
-+ usb_phy_init(h20ahb->phy[i]);
-+ /* bring PHY out of suspend */
-+ usb_phy_set_suspend(h20ahb->phy[i], 0);
-+ }
-+
-+ return 0;
-+
-+err_pm_runtime:
-+ pm_runtime_put_sync(dev);
-+
-+err_phy:
-+ for (i = 0; i < h20ahb->nports; i++) {
-+ if (h20ahb->phy[i])
-+ usb_phy_shutdown(h20ahb->phy[i]);
-+ }
-+
-+ usb_put_hcd(hcd);
-+
-+ return ret;
-+}
-+
-+
-+/**
-+ * ehci_hcd_h20ahb_remove - shutdown processing for EHCI HCDs
-+ * @pdev: USB Host Controller being removed
-+ *
-+ * Reverses the effect of usb_ehci_hcd_h20ahb_probe(), first invoking
-+ * the HCD's stop() method. It is always called from a thread
-+ * context, normally "rmmod", "apmd", or something similar.
-+ */
-+static int ehci_hcd_h20ahb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct usb_hcd *hcd = dev_get_drvdata(dev);
-+ struct h20ahb_hcd *h20ahb = (struct h20ahb_hcd *)hcd_to_ehci(hcd)->priv;
-+ int i;
-+
-+ usb_remove_hcd(hcd);
-+
-+ for (i = 0; i < h20ahb->nports; i++) {
-+ if (h20ahb->phy[i])
-+ usb_phy_shutdown(h20ahb->phy[i]);
-+ }
-+
-+ usb_put_hcd(hcd);
-+ pm_runtime_put_sync(dev);
-+ pm_runtime_disable(dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id h20ahb_ehci_dt_ids[] = {
-+ { .compatible = "snps,ehci-h20ahb" },
-+ { }
-+};
-+
-+MODULE_DEVICE_TABLE(of, h20ahb_ehci_dt_ids);
-+
-+static struct platform_driver ehci_hcd_h20ahb_driver = {
-+ .probe = ehci_hcd_h20ahb_probe,
-+ .remove = ehci_hcd_h20ahb_remove,
-+ .shutdown = usb_hcd_platform_shutdown,
-+ /*.suspend = ehci_hcd_h20ahb_suspend, */
-+ /*.resume = ehci_hcd_h20ahb_resume, */
-+ .driver = {
-+ .name = hcd_name,
-+ .of_match_table = h20ahb_ehci_dt_ids,
-+ }
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int __init ehci_h20ahb_init(void)
-+{
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-+
-+ ehci_init_driver(&ehci_h20ahb_hc_driver, &ehci_h20ahb_overrides);
-+ return platform_driver_register(&ehci_hcd_h20ahb_driver);
-+}
-+module_init(ehci_h20ahb_init);
-+
-+static void __exit ehci_h20ahb_cleanup(void)
-+{
-+ platform_driver_unregister(&ehci_hcd_h20ahb_driver);
-+}
-+module_exit(ehci_h20ahb_cleanup);
-+
-+MODULE_ALIAS("platform:ehci-h20ahb");
-+MODULE_AUTHOR("Liviu Dudau ");
-+
-+MODULE_DESCRIPTION(DRIVER_DESC);
-+MODULE_LICENSE("GPL");
---
-2.1.0
-
diff --git a/patches.arch/arm64-0002-usb-fix-hcd-h20ahb-driver-depends.patch b/patches.arch/arm64-0002-usb-fix-hcd-h20ahb-driver-depends.patch
deleted file mode 100644
index 027a8e5..0000000
--- a/patches.arch/arm64-0002-usb-fix-hcd-h20ahb-driver-depends.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 7a99ce84c569b42f68908574b89a59370c8b808d Mon Sep 17 00:00:00 2001
-From: Alex Shi
-Date: Thu, 5 Jun 2014 07:58:06 +0100
-Subject: [PATCH 02/10] usb: fix hcd h20ahb driver depends
-Patch-mainline: No
-References: bnc#902632
-
-USB_EHCI_HCD_SYNOPSYS is not only dependent on USB_EHCI_HCD, but
-also on USB_PHY. Otherwise kernel build has the following error:
-
- LD init/built-in.o
-Drivers/built-in.o: In function `ehci_hcd_h20ahb_probe':
-:(.text+0xb9bb4): undefined reference to `usb_add_phy_dev'
-
-Signed-off-by: Alex Shi
-Signed-off-by: Alexander Graf
-
----
- drivers/usb/host/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
-index 4aa17fa..a9bf03d 100644
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -190,7 +190,7 @@ config USB_EHCI_HCD_STI
-
- config USB_EHCI_HCD_SYNOPSYS
- tristate "Support for Synopsys Host-AHB USB 2.0 controller"
-- depends on USB_EHCI_HCD
-+ depends on USB_EHCI_HCD && USB_PHY
- ---help---
- Enable support for onchip USB controllers based on DesignWare USB 2.0
- Host-AHB Controller IP from Synopsys.
---
-2.1.0
-
diff --git a/series.conf b/series.conf
index d55909f..4557860 100644
--- a/series.conf
+++ b/series.conf
@@ -155,8 +155,6 @@
patches.arch/arm-arndale-usb.patch
+agraf patches.arch/arm-arndale-dma.patch
patches.arch/arm-exynos-dwmmc-modalias.patch
- patches.arch/arm64-0001-usb-Add-support-for-Synopsis-H20AHB-EHCI-host-contro.patch
- patches.arch/arm64-0002-usb-fix-hcd-h20ahb-driver-depends.patch
+needs_update patches.arch/arm64-0004-net-xgbe-Add-A0-silicon-support.patch
patches.arch/arm64-0006-arm64-Select-reboot-driver-for-X-Gene-platform.patch
patches.arch/arm64-0010-KVM-ARM-Hack-to-enable-VGIC-mapping-on-64k-PAGE_SIZE.patch
--
2.6.6
--
To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org
To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
