Hello, On 10/31/2012 08:38 AM, Peter Czanik wrote:
Hello,
On 10/30/2012 11:37 PM, Alexander Graf wrote:
I don't know, where your uImage.old comes from :) Trying to do it by hand using the original files from 12.2 RC2 it seems to be as with all my previous attempts: Yeah, I tried the original files too. As soon as I pass console=ttymxc0,115200 there it boots just fine. Gotta love heisenbugs.
Could you please try the latest image:
http://download.opensuse.org/ports/armv7hl/distribution/12.2-untested/applia...
I'm currently not able to test if it actually does work, but according to my observations it should. Please let me know if it does work for you! If not, please post the result of "printenv" on your machine.
Alex
Tested an even later image, as the one you sent is no more available. No luck:
Did you have a chance to look at it? Everything else seems to work fine with this boot environment, except openSUSE 12.2 / factory images... Bye, CzP
U-Boot 2009.01-2.0.6-efikamx (Nov 02 2010 - 17:13:53)
CPU: Freescale i.MX51 family 3.0V at 800 MHz mx51 pll1: 800MHz mx51 pll2: 665MHz mx51 pll3: 216MHz ipg clock : 66500000Hz ipg per clock : 665000000Hz uart clock : 66500000Hz cspi clock : 54000000Hz Board: MX51 Efika MX 3.0 [POR] DRAM: 512 MB JEDEC ID: 0xbf:0x25:0x4a Reading SPI NOR flash 0x40000 [0x10000 bytes] -> ram 0x975f06e8 .SUCCESS
*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial board id: 1.0.1, rev1.3 Boot Source: SPI NOR FLASH BOOT Boot Cmd: for device in "mmc ide"; do if strcmp ${device} == mmc; then; mmcinit; setenv units "0 1"; else; setenv units "0"; fi; for interface in ${units}; do if strcmp ${device} == mmc; then mmcprobe ${interface}; else; ide reset; fi; for fs in "ext2 fat"; do setenv loadcmd "${fs}load ${device} 0:1"; if ${loadcmd} ${scriptaddr} boot.scr; then; if imi ${scriptaddr}; then; autoscr ${scriptaddr}; fi; fi; done; done; done; Hit any key to stop autoboot: 0 U-Boot# printenv bootdelay=3 baudrate=115200 loadaddr=0x90007FC0 firmware_version=20101102171353 uboot_addr=0x00000000 uboot_size=0x00040000 env_addr=0x00040000 kerneladdr=0x90007FC0 scriptaddr=0x91000000 ramdiskaddr=0x92000000 console=ttymxc0,115200 model=mx bootcmd=for device in "mmc ide"; do if strcmp ${device} == mmc; then; mmcinit; setenv units "0 1"; else; setenv units "0"; fi; for interface in ${units}; do if strcmp ${device} == mmc; then mmcprobe ${interface}; else; ide reset; fi; for fs in "ext2 fat"; do setenv loadcmd "${fs}load ${device} 0:1"; if ${loadcmd} ${scriptaddr} boot.scr; then; if imi ${scriptaddr}; then; autoscr ${scriptaddr}; fi; fi; done; done; done; stdin=serial stdout=serial stderr=serial
Environment size: 706/65532 bytes U-Boot# boot SD card. Vendor: Man 02 OEM TM "SA04G" Date 11/2009 Product: 2622955146 Revision: 0.4 SD card. Vendor: Man 02 OEM TM "SA04G" Date 11/2009 Product: 2622955146 Revision: 0.4 MMC interface 0 selected
641 bytes read
## Checking Image at 91000000 ... Legacy image found Image Name: Boot-Script Image Type: ARM Linux Script (uncompressed) Data Size: 577 Bytes = 0.6 kB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 569 Bytes = 0.6 kB Verifying Checksum ... OK ## Executing script at 91000000 kerneladdr=0x90007FC0 ramdiskaddr=0x92000000
3213208 bytes read
28088081 bytes read ## Booting kernel from Legacy Image at 90007fc0 ... Image Name: Linux-3.4.6-2.10-imx51 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3213144 Bytes = 3.1 MB Load Address: 90008000 Entry Point: 90008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 92000000 ... Image Name: Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 28088017 Bytes = 26.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
Bye, CzP
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org