Hi! After some tweaks I successfully build an image for Cubieboard2 board. Although everything works, after the first boot the u-boot script tries to load the kernel from a missing file (I suspect that during the initial setup, the kernel is renamed). This is how the /boot directory and /boot/boot.script looks __after__ the first boot: linux:~ # ll /boot total 15915 -rw-r--r-- 1 root root 0 Jan 1 2014 0x27259817 -rw-r--r-- 1 root root 1697039 Dec 31 00:13 System.map-3.4.75-86-sunxi lrwxrwxrwx 1 root root 1 Jan 1 01:00 boot -> . -rw-r--r-- 1 root root 1484 Feb 26 2013 boot.readme -rw-r--r-- 1 root root 1704 Jan 1 01:02 boot.scr -rw-r--r-- 1 root root 1632 Jan 1 2014 boot.script -rw-r--r-- 1 root root 95879 Dec 30 23:16 config-3.4.75-86-sunxi -rw-r--r-- 1 root root 45384 Dec 14 12:10 cubieboard2.bin lrwxrwxrwx 1 root root 22 Jan 1 2014 initrd -> initrd-3.4.75-86-sunxi -rw-r--r-- 1 root root 4191724 Jan 1 01:02 initrd-3.4.75-86-sunxi drwx------ 2 root root 12288 Jan 1 2014 lost+found -rw-r--r-- 1 root root 11 Jan 1 01:02 mbrid -rwxr-xr-x 1 root root 18432 Dec 10 21:52 sunxi-spl.bin -rw-r--r-- 1 root root 83294 Dec 31 00:20 symvers-3.4.75-86-sunxi.gz -rw-r--r-- 1 root root 239 Dec 31 00:20 sysctl.conf-3.4.75-86-sunxi -rw-r--r-- 1 root root 224780 Dec 10 21:52 u-boot.img lrwxrwxrwx 1 root root 22 Jan 1 2014 uImage -> uImage-3.4.75-86-sunxi -rw-r--r-- 1 root root 4446424 Dec 31 00:20 uImage-3.4.75-86-sunxi -rw-r--r-- 1 root root 5306522 Dec 31 00:14 vmlinux-3.4.75-86-sunxi.gz linux:~ # linux:~ # cat /boot/boot.script setenv ramdisk boot/initrd.uboot setenv kernel boot/linux.vmx setenv initrd_high "0xffffffff" setenv fdt_high "0xffffffff" setenv bootargs loader=uboot plymouth.enable=0 console=ttyS0,115200n8 showopts ${append} setenv kernel 'boot/linux.vmx' setenv initrd 'boot/initrd.uboot' setenv fdt 'cubieboard2.bin' setenv flavor 'cubieboard2' setenv target 'firstboot' setenv bootdevs 'mmc' setenv bootparts '${unit}:1' setenv initrd_high '0xffffffff' setenv fdt_high '0xffffffff' setenv boottype 'bootm' [..] Since there is no file named "linux.vmx", u-boot fails with the following error: Jumping to boot.scr ## Executing script at 44000000 kerneladdr=0x48000000 ramdiskaddr=0x43100000 mmc0 is current device ** File not found boot/linux.vmx ** Of course, the first boot works because the original image contains a file named linux.vmx and all the necessary files. u-boot script gets updated on the first boot? How is done in other boards? Thanks! -- Oscar C. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org