From: Guillaume Gardet <Guillaume.Gardet(a)arm.com>
Sent: 12 September 2019 10:04
To: Michael Ströder <michael(a)stroeder.com>om>; opensuse-arm(a)opensuse.org
Subject: RE: [opensuse-arm] RPI1 does not boot after Tumbleweed upgrade
From: Michael Ströder <michael(a)stroeder.com>
Sent: 11 September 2019 20:44
Subject: Re: [opensuse-arm] RPI1 does not boot after Tumbleweed
On 9/11/19 8:31 PM, Freek de Kruijf wrote:
Op woensdag 11 september 2019 20:26:41 CEST
schreef Freek de Kruijf:
I did have the same problem as Michael. After a
"zypper dup --no-r"
the system did not boot anymore. I used the serial connection with
the RPi1 and there was no output at all.
So I did check the content of the first partition on the SD. It did
6 files present in: raspberrypi-firmware-2019.09.04-1.1.noarch.rpm
On my desktop I unpacked these files and put them on the first partition.
After that the system boots again.
The question is: why were these files removed in the upgrade?
I found also the answer:
they are wrongly placed in /boot/vc/ instead of /boot/efi/ .
I can confirm that manually copying the files fixed booting. Thanks.
And as Freek I also suspect /boot/vc/ is wrong path because package
raspberrypi-firmware-2019.09.04-1.1.noarch is installed but 1.
partition is mounted on /boot/efi/.