Re: [opensuse-arm] Re: JeOS-efi.aarch64-2018.03.07-Build2.1.raw: Invalid FAT entry

Am 07.03.2018 um 19:12 schrieb Matwey V. Kornilov :

07.03.2018 21:01, Matwey V. Kornilov пишет:

...

Hello,

I am trying to use openSUSE-Tumbleweed-ARM-JeOS-efi.aarch64-2018.03.07-Build2.1.raw to run Rock64. I use manually compiled u-boot 2018.01-rc2-02249-g19e31fac0d-dirty and see the following:

=> load mmc 1:1 0x02000000 efi/boot/bootaa64.efi reading efi/boot/bootaa64.efi MMC: block number 0x100008005 exceeds max(0x1dacc00) MMC: block number 0x100008005 exceeds max(0x1dacc00) Invalid FAT entry 6144 bytes read in 11 ms (544.9 KiB/s)

This didn't happen when we used kiwi-7 to build JeOS at Factory. Can it be some issue with FAT16/FAT32?

Not sure, that related, but

EFI created by Kiwi-7

System ID "mkfs.fat" Media byte 0xf8 (hard disk) 512 bytes per logical sector 4096 bytes per cluster 1 reserved sector First FAT starts at byte 512 (sector 1) 2 FATs, 16 bit entries 102400 bytes per FAT (= 200 sectors) Root directory starts at byte 205312 (sector 401) 512 root directory entries Data area starts at byte 221696 (sector 433) 51146 data clusters (209494016 bytes) 63 sectors/track, 255 heads 0 hidden sectors 409604 sectors total

EFI created by Kiwi-9

System ID "mkfs.fat" Media byte 0xf8 (hard disk) 512 bytes per logical sector 2048 bytes per cluster 1 reserved sector First FAT starts at byte 512 (sector 1) 2 FATs, 12 bit entries 2048 bytes per FAT (= 4 sectors) Root directory starts at byte 4608 (sector 9) 512 root directory entries Data area starts at byte 20992 (sector 41) 1013 data clusters (2074624 bytes) 32 sectors/track, 64 heads 0 hidden sectors 4096 sectors total

We reduced the size of the efi partition to 2MB. Maybe that triggered a bug in U-Boot? Could you try to build an image with a 16mb partition instead? Alex

-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org

-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org