Hi all, I have upgraded to 10.2. I have the following problem with an avm fritzcard dsl sl usb device. With 10.1 I didn't have any problems. <4>NMI Watchdog detected LOCKUP on CPU 0 <4>CPU 0 <4>Modules linked in: fcdslslusb capi capifs kernelcapi usbhid nvidia ohci1394 snd_intel8x0 snd_ac97_codec snd_ac97_bus ieee1394 ide_cd cdrom snd_pcm snd_timer forcedeth snd soundcore snd_page_alloc ohci_hcd ehci_hcd i2c_nforce2 i2c_core usbcore parport_pc lp parport reiserfs edd fan sg sata_nv libata amd74xx thermal processor sd_mod scsi_mod ide_disk ide_core <4>Pid: 1842, comm: capiinit Tainted: P U 2.6.18.2-34-default #1 <4>RIP: 0010:[.text.lock.spinlock+34/138] [.text.lock.spinlock+34/138] .text.lock.spinlock+0x22/0x8a <4>RSP: 0018:ffff81007b8c9c70 EFLAGS: 00000086 <4>RAX: 0000000000000282 RBX: 0000000000000800 RCX: ffffffff8887b840 <4>RDX: ffff81007b8c9cb0 RSI: ffff81007b8c9cb8 RDI: ffff81007a55724c <4>RBP: ffff81007a557244 R08: ffff81007bad5004 R09: 0000000000000000 <4>R10: 0000000000000003 R11: ffff81007ff14980 R12: ffff81007a55724c <4>R13: ffff81007b8c9cb8 R14: ffff81007b8c9cb0 R15: 0000000000000000 <4>FS: 00002b24a519d6f0(0000) GS:ffffffff805b7000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b <4>CR2: 00002b24a4cbb000 CR3: 000000007b6df000 CR4: 00000000000006e0 <4>Process capiinit (pid: 1842, threadinfo ffff81007b8c8000, task ffff81007d7f5080) <4>Stack: ffffffff8889f0b2 0000000000000800 ffffffff8887b840 ffff81007bad5004 <4> ffff81007bad5024 0000000000000800 ffffffff8889b3cb 0000000000000003 <4> 0000000000000003 0000000000000000 0000000000000246 0000000000000800 <4>Call Trace: <4> [_end+136900786/2130640896] :fcdslslusb:claim_urb+0x1d/0x8f <4> [_end+136755264/2130640896] :fcdslslusb:Block_RxHandler+0x0/0x4d0 <4> [_end+136885195/2130640896] :fcdslslusb:os_usb_submit_rx+0x32/0xe9 <4> [_end+136893893/2130640896] :fcdslslusb:OSHWRxBuffer+0x44/0x4f <4> [_end+136527809/2130640896] :fcdslslusb:BLK_Start+0x91/0xe0 <4> [_end+136531091/2130640896] :fcdslslusb:E1_Activate+0x13/0x20 <4> [_end+136454454/2130640896] :fcdslslusb:CM_Activate+0x6/0x50 <4> [_end+136889408/2130640896] :fcdslslusb:start+0x1b4/0x21f <4> [_end+136889849/2130640896] :fcdslslusb:load_ware+0x14e/0x1ab <4> [_end+136295344/2130640896] :kernelcapi:capi20_manufacturer+0x2d5/0x57c <4> [do_gettimeofday+80/148] do_gettimeofday+0x50/0x94 <4> [getnstimeofday+16/40] getnstimeofday+0x10/0x28 <4> [rb_insert_color+97/218] rb_insert_color+0x61/0xda <4> [enqueue_hrtimer+85/112] enqueue_hrtimer+0x55/0x70 <4> [_end+136407267/2130640896] :capi:capi_ioctl+0x2c1/0x441 <4> [do_ioctl+85/107] do_ioctl+0x55/0x6b <4> [vfs_ioctl+584/609] vfs_ioctl+0x248/0x261 <4> [sys_ioctl+89/120] sys_ioctl+0x59/0x78 <4> [system_call+126/131] system_call+0x7e/0x83 <4> <4> <4>Code: 83 3f 00 7e f9 e9 d4 fe ff ff f3 90 83 3f 00 7e f9 e9 d3 fe <4>console shuts up ... And here is the beginnning of the log: Inspecting /boot/System.map-2.6.18.2-34-default Loaded 23895 symbols from /boot/System.map-2.6.18.2-34-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Bootdata ok (command line is root=/dev/sda6 vga=0x317 resume=/dev/sda5 splash=silent) <5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 I have attached the complete log. Thank you Ramon Ramos "Jetzt Handykosten senken mit klarmobil - 14 Ct./Min.! Hier klicken" http://www.klarmobil.de/index.html?pid=73025 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-amd64+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-amd64+help@opensuse.org