I've recently installed opensuse 10.2 (release) on some new hardware and have found that the a100u2w and k8temp modules are missing. CPU AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ in Gigabyte GA-M55plus-S3G mainboard with 1GB RAM Everything else works fine. Nice and stable. The former drives the Initio A100U2W SCSI host adapter (modprobe during boot tries but can't load absent module) and the latter is suggested by sensors-detect to ascertain the processor temperature. Driver `k8temp' (should be inserted): Detects correctly: * ISA bus, undetermined address (Busdriver `i2c-isa') Chip `AMD K8 thermal sensors' (confidence: 9) I've tried to figure out why they are absent but can't work it out. Kernel configuration provides the option to build the a100u2w module, and it's compiling now, but I'm stuck on the k8temp as there's no obvious option to build that. -- /"\ Bernd Felsche - Innovative Reckoning, Perth, Western Australia \ / ASCII ribbon campaign | "If we let things terrify us, X against HTML mail | life will not be worth living." / \ and postings | Lucius Annaeus Seneca, c. 4BC - 65AD. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-amd64+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-amd64+help@opensuse.org