Re: [suse-amd64] Sun W1100z - problem with keyboard and mouse
Hi, We have two of the same workstations (W1100z) and we are seeing exactly the same problem as described in Mark's e-mail under Suse 9.3. The problem also occurs under Novell Linux Desktop. I can also add Fedora Core 4 and Ubuntu 5.04 to the list of distros that work properly. This is definitely a compatibility issue with Suse only. Suse is the distribution of choice at our institution and this problem is proving to be very frustrating. I would welcome any suggestions as to how we might work around it. Cheers, Bernard ---Previous Messages--- I got a similar problem with the keyboard. I believe it was related to a timing issue, caused by some problems with the interrupts. For instance, time was not linear on this machine, it keeps jumping back and forth all the time. Very odd behavior, the OS was really confused. With APIC disabled in the BIOS and some kernel updates, it got better... ...Luc... leluc@mac.com On Jul 8, 2005, at 2:11 PM, Mark Chernault wrote:
Hardware: 4 different Sun Java Workstation W1100z (Opteron 150, 1GB RAM) 4 x Sun USB keyboard 4 x Sun USB mouse
Problem occurs with: SuSE Professional 9.1 64bit SuSE Professional 9.3 32bit SuSE Professional 9.3 64bit
Problem does not occur with: Sun Java Desktop Gentoo OpenBSD
Problem Description:
Keyboard - While holding down any key, that character will repeat on the screen about 30-160 times until it pauses for a second before displaying several of the same character at once, and will then continue to repeat until the next pause. This occurs on the console, in xterms, remotely, in different shells, and in different editors. It also occurs while typing normally.
Mouse - While in X, moving the mouse in circles for about 10s-60s, the mouse will pause for a second and then jump to where it thinks it should be. If I continously move the mouse in circles it will pause just about every minute.
I've only had the problem occur in SuSE Professional, 9.1 64bit, 9.3 32bit, 9.3 64bit. I didn't encounter the problem in the Sun Java Desktop, gentoo or in OpenBSD. The problem occurs using the latest SuSE kernel, as well as with kernel 2.6.13-rc1. We currently have 4 W1100z's that have SuSE 9.3 Pro 64bit on them, and all 4 exhibit the same problem.
Thanks in advance for any help. If you need more information let me know.
-Mark ---------------------------------------------------------------------- ----------------------------------------------
We have at least 10 of these boxes. All that run SUSE had this same issue. Mandrake boxes run fine. Our fix was acpi=off which seemed to help. The pauses seemed to be sometimes related to disk access -- Adaptec AIC7902 with Seagate ST373307LW Yes this appears to be a kernel problem that needs to be looked at. eric Bernard Lineham wrote:
Hi,
We have two of the same workstations (W1100z) and we are seeing exactly the same problem as described in Mark's e-mail under Suse 9.3. The problem also occurs under Novell Linux Desktop. I can also add Fedora Core 4 and Ubuntu 5.04 to the list of distros that work properly. This is definitely a compatibility issue with Suse only.
Suse is the distribution of choice at our institution and this problem is proving to be very frustrating. I would welcome any suggestions as to how we might work around it.
Cheers,
Bernard
---Previous Messages---
I got a similar problem with the keyboard. I believe it was related to a timing issue, caused by some problems with the interrupts. For instance, time was not linear on this machine, it keeps jumping back and forth all the time. Very odd behavior, the OS was really confused. With APIC disabled in the BIOS and some kernel updates, it got better...
...Luc... leluc@mac.com
On Jul 8, 2005, at 2:11 PM, Mark Chernault wrote:
Hardware: 4 different Sun Java Workstation W1100z (Opteron 150, 1GB RAM) 4 x Sun USB keyboard 4 x Sun USB mouse
Problem occurs with: SuSE Professional 9.1 64bit SuSE Professional 9.3 32bit SuSE Professional 9.3 64bit
Problem does not occur with: Sun Java Desktop Gentoo OpenBSD
Problem Description:
Keyboard - While holding down any key, that character will repeat on the screen about 30-160 times until it pauses for a second before displaying several of the same character at once, and will then continue to repeat until the next pause. This occurs on the console, in xterms, remotely, in different shells, and in different editors. It also occurs while typing normally.
Mouse - While in X, moving the mouse in circles for about 10s-60s, the mouse will pause for a second and then jump to where it thinks it should be. If I continously move the mouse in circles it will pause just about every minute.
I've only had the problem occur in SuSE Professional, 9.1 64bit, 9.3 32bit, 9.3 64bit. I didn't encounter the problem in the Sun Java Desktop, gentoo or in OpenBSD. The problem occurs using the latest SuSE kernel, as well as with kernel 2.6.13-rc1. We currently have 4 W1100z's that have SuSE 9.3 Pro 64bit on them, and all 4 exhibit the same problem.
Thanks in advance for any help. If you need more information let me know.
-Mark ---------------------------------------------------------------------- ----------------------------------------------
Thanks Eric. The problem seems to go away with acpi=off. The only oddity was that if I pass acpi=off to the default SuSE kernel after installation it freezes after a message about probing PCI hardware. Let it sit there for 15 minutes before rebooting, no change. ... ACPI: Subsystem revision 20050211 ACPI: Interpreter disabled. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Compiled a custom kernel from the SuSE kernel source, without an initrd, and with acpi=off and it boots fine. Boots fine from the rescue image with acpi=off, and from the installation image with acpi=off. On Monday 11 July 2005 07:40, Eric Whiting wrote:
We have at least 10 of these boxes.
All that run SUSE had this same issue. Mandrake boxes run fine. Our fix was acpi=off which seemed to help.
The pauses seemed to be sometimes related to disk access -- Adaptec AIC7902 with Seagate ST373307LW
Yes this appears to be a kernel problem that needs to be looked at.
eric
Bernard Lineham wrote:
Hi,
We have two of the same workstations (W1100z) and we are seeing exactly the same problem as described in Mark's e-mail under Suse 9.3. The problem also occurs under Novell Linux Desktop. I can also add Fedora Core 4 and Ubuntu 5.04 to the list of distros that work properly. This is definitely a compatibility issue with Suse only.
Suse is the distribution of choice at our institution and this problem is proving to be very frustrating. I would welcome any suggestions as to how we might work around it.
Cheers,
Bernard
---Previous Messages---
I got a similar problem with the keyboard. I believe it was related to a timing issue, caused by some problems with the interrupts. For instance, time was not linear on this machine, it keeps jumping back and forth all the time. Very odd behavior, the OS was really confused. With APIC disabled in the BIOS and some kernel updates, it got better...
...Luc... leluc@mac.com
On Jul 8, 2005, at 2:11 PM, Mark Chernault wrote:
Hardware: 4 different Sun Java Workstation W1100z (Opteron 150, 1GB RAM) 4 x Sun USB keyboard 4 x Sun USB mouse
Problem occurs with: SuSE Professional 9.1 64bit SuSE Professional 9.3 32bit SuSE Professional 9.3 64bit
Problem does not occur with: Sun Java Desktop Gentoo OpenBSD
Problem Description:
Keyboard - While holding down any key, that character will repeat on the screen about 30-160 times until it pauses for a second before displaying several of the same character at once, and will then continue to repeat until the next pause. This occurs on the console, in xterms, remotely, in different shells, and in different editors. It also occurs while typing normally.
Mouse - While in X, moving the mouse in circles for about 10s-60s, the mouse will pause for a second and then jump to where it thinks it should be. If I continously move the mouse in circles it will pause just about every minute.
I've only had the problem occur in SuSE Professional, 9.1 64bit, 9.3 32bit, 9.3 64bit. I didn't encounter the problem in the Sun Java Desktop, gentoo or in OpenBSD. The problem occurs using the latest SuSE kernel, as well as with kernel 2.6.13-rc1. We currently have 4 W1100z's that have SuSE 9.3 Pro 64bit on them, and all 4 exhibit the same problem.
Thanks in advance for any help. If you need more information let me know.
-Mark ----------------------------------------------------------------- ----- ----------------------------------------------
-- Mark Chernault <marchern@cs.nmsu.edu> Technical Assistant, COG, CS Dept., NMSU
On Mon, Jul 11, 2005 at 10:19:41AM -0600, Mark Chernault wrote:
Thanks Eric. The problem seems to go away with acpi=off.
Anyways, it sounds like broken time keeping. When you do watch -n1 cat /proc/interrupts and look at the increasing time. Do the seconds roughly increase every second or are there jumps or delays? And do you see approximately 1000 timer interrupts each second? -Andi
On Mon, Jul 11, 2005 at 06:44:05PM +0200, Andi Kleen wrote:
On Mon, Jul 11, 2005 at 10:19:41AM -0600, Mark Chernault wrote:
Thanks Eric. The problem seems to go away with acpi=off.
Anyways, it sounds like broken time keeping. When you do
watch -n1 cat /proc/interrupts
Sorry make that watch -n1 'date ; cat /proc/interrupts' and look only at the second time stamp. The first one doesn't seem to be updated from the system clock. -Andi
On Monday 11 July 2005 10:55, Andi Kleen wrote:
On Mon, Jul 11, 2005 at 06:44:05PM +0200, Andi Kleen wrote:
On Mon, Jul 11, 2005 at 10:19:41AM -0600, Mark Chernault wrote:
Thanks Eric. The problem seems to go away with acpi=off.
Anyways, it sounds like broken time keeping. When you do
watch -n1 cat /proc/interrupts
Sorry make that
watch -n1 'date ; cat /proc/interrupts'
and look only at the second time stamp. The first one doesn't seem to be updated from the system clock.
-Andi
With acpi=off, seconds increase every second, and there are about 1000 timer interrupts per second. With acpi, both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 1 and the timer interrupts by 1000. Then both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 2 and the timer interrupts by 1000. This cycle repeats. Time Timer 1 1000 2 2000 3 3000 4 4000 5 5000 Pause for 1 second 6 6000 7 7000 8 8000 9 9000 10 10000 Pause for 1 second 12 11000 -- Mark Chernault <marchern@cs.nmsu.edu> Technical Assistant, COG, CS Dept., NMSU
On Mon, Jul 11, 2005 at 11:46:03AM -0600, Mark Chernault wrote:
With acpi, both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 1 and the timer interrupts by 1000. Then both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 2 and the timer interrupts by 1000. This cycle repeats.
Time Timer 1 1000 2 2000 3 3000 4 4000 5 5000 Pause for 1 second 6 6000 7 7000 8 8000 9 9000 10 10000 Pause for 1 second 12 11000
What happens when you boot with acpi_skip_timer_override ? (in 9.3) And can you supply /var/log/boot.msg for the ACPI case and lspci? -Andi
On Monday 11 July 2005 12:45, Andi Kleen wrote:
On Mon, Jul 11, 2005 at 11:46:03AM -0600, Mark Chernault wrote:
With acpi, both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 1 and the timer interrupts by 1000. Then both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 2 and the timer interrupts by 1000. This cycle repeats.
Time Timer 1 1000 2 2000 3 3000 4 4000 5 5000 Pause for 1 second 6 6000 7 7000 8 8000 9 9000 10 10000 Pause for 1 second 12 11000
What happens when you boot with acpi_skip_timer_override ? (in 9.3)
And can you supply /var/log/boot.msg for the ACPI case and lspci?
-Andi
With acpi_skip_timer_override I get the same cycle. /var/log/boot.msg and lspci output are attached. -- Mark Chernault <marchern@cs.nmsu.edu> Technical Assistant, COG, CS Dept., NMSU
Andi Kleen wrote:
On Mon, Jul 11, 2005 at 11:46:03AM -0600, Mark Chernault wrote:
With acpi, both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 1 and the timer interrupts by 1000. Then both increase fine for 5 seconds, then there is a 1 second pause, with the second increased by 2 and the timer interrupts by 1000. This cycle repeats.
Time Timer 1 1000 2 2000 3 3000 4 4000 5 5000 Pause for 1 second 6 6000 7 7000 8 8000 9 9000 10 10000 Pause for 1 second 12 11000
What happens when you boot with acpi_skip_timer_override ? (in 9.3)
And can you supply /var/log/boot.msg for the ACPI case and lspci?
-Andi
I grep'd the timer and added the values for dual proc. I see the pauses like Mark, but I'm not sure what the count and time are doing. It almost looks like the count/time function ok -- both continue to increment as expected -- except after a short pause i'd expect the date to have changed more than 1s. while(true);do cat /proc/interrupts |grep timer |perl -ane '$t=$F[1]+$F[2];print "$t "';date;sleep 1;done 2895350 Mon Jul 11 14:53:53 MDT 2005 2896362 Mon Jul 11 14:53:54 MDT 2005 2897374 Mon Jul 11 14:53:55 MDT 2005 2898389 Mon Jul 11 14:53:56 MDT 2005 2899341 Mon Jul 11 14:53:57 MDT 2005 2900352 Mon Jul 11 14:53:58 MDT 2005 2901365 Mon Jul 11 14:53:59 MDT 2005 2902379 Mon Jul 11 14:54:00 MDT 2005 2903391 Mon Jul 11 14:54:01 MDT 2005 2904337 Mon Jul 11 14:54:02 MDT 2005 2905357 Mon Jul 11 14:54:03 MDT 2005 2906369 Mon Jul 11 14:54:04 MDT 2005 2907382 Mon Jul 11 14:54:05 MDT 2005 2908394 Mon Jul 11 14:54:06 MDT 2005 2909338 Mon Jul 11 14:54:07 MDT 2005 2910356 Mon Jul 11 14:54:08 MDT 2005 2911368 Mon Jul 11 14:54:09 MDT 2005 2912380 Mon Jul 11 14:54:10 MDT 2005 2913392 Mon Jul 11 14:54:11 MDT 2005 2914340 Mon Jul 11 14:54:13 MDT 2005 2915358 Mon Jul 11 14:54:14 MDT 2005 2916371 Mon Jul 11 14:54:15 MDT 2005 2917387 Mon Jul 11 14:54:16 MDT 2005 2918400 Mon Jul 11 14:54:17 MDT 2005 2919350 Mon Jul 11 14:54:18 MDT 2005 Inspecting /boot/System.map-2.6.11.4-21.7-smp Loaded 22195 symbols from /boot/System.map-2.6.11.4-21.7-smp. Symbols match kernel version 2.6.11. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Bootdata ok (command line is root=/dev/sda3 vga=0x31a selinux=0 splash=silent console=tty0 resume=/dev/sda2) <4>Linux version 2.6.11.4-21.7-smp (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Thu Jun 2 14:23:14 UTC 2005 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) <4> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 00000000dff60000 (usable) <4> BIOS-e820: 00000000dff60000 - 00000000dff72000 (ACPI data) <4> BIOS-e820: 00000000dff72000 - 00000000dff80000 (ACPI NVS) <4> BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) <7>ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f7340 <7>ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0x00000000dff6d6e5 <7>ACPI: FADT (v003 SUN SUNmetro 0x06040000 PTEC 0x000f4240) @ 0x00000000dff71db6 <7>ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x00000000dff71eaa <7>ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000dff71f72 <7>ACPI: DSDT (v001 SUN K85AE 0x06040000 MSFT 0x0100000d) @ 0x0000000000000000 <6>SRAT: PXM 0 -> APIC 0 -> Node 0 <6>SRAT: PXM 1 -> APIC 1 -> Node 1 <6>SRAT: Node 0 PXM 0 0-9ffff <6>SRAT: Node 0 PXM 0 0-7fffffff <6>SRAT: Node 1 PXM 1 80000000-dfffffff <4>Bootmem setup node 0 0000000000000000-000000007fffffff <4>Bootmem setup node 1 0000000080000000-00000000dff5ffff <7>On node 0 totalpages: 524287 <7> DMA zone: 4096 pages, LIFO batch:1 <7> Normal zone: 520191 pages, LIFO batch:16 <7> HighMem zone: 0 pages, LIFO batch:1 <7>On node 1 totalpages: 393055 <7> DMA zone: 0 pages, LIFO batch:1 <7> Normal zone: 393055 pages, LIFO batch:16 <7> HighMem zone: 0 pages, LIFO batch:1 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>Processor #0 15:5 APIC version 16 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>Processor #1 15:5 APIC version 16 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 <6>ACPI: IOAPIC (id[0x03] address[0xe8000000] gsi_base[24]) <6>IOAPIC[1]: apic_id 3, version 17, address 0xe8000000, GSI 24-27 <6>ACPI: IOAPIC (id[0x04] address[0xe8001000] gsi_base[28]) <6>IOAPIC[2]: apic_id 4, version 17, address 0xe8001000, GSI 28-31 <6>ACPI: IOAPIC (id[0x05] address[0xe8500000] gsi_base[32]) <6>IOAPIC[3]: apic_id 5, version 17, address 0xe8500000, GSI 32-35 <6>ACPI: IOAPIC (id[0x06] address[0xe8501000] gsi_base[36]) <6>IOAPIC[4]: apic_id 6, version 17, address 0xe8501000, GSI 36-39 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>Setting APIC routing to flat <6>Using ACPI (MADT) for SMP configuration information <4>Checking aperture... <4>CPU 0: aperture @ f0000000 size 128 MB <4>CPU 1: aperture @ f0000000 size 128 MB <4>Built 2 zonelists <4>Kernel command line: root=/dev/sda3 vga=0x31a selinux=0 splash=silent console=tty0 resume=/dev/sda2 <6>bootsplash: silent mode. <4>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 131072 bytes) <6>time.c: Using 1.193182 MHz PIT timer. <6>time.c: Detected 1994.354 MHz processor. <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) <4>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) <4>Memory: 3604956k/3669376k available (2281k kernel code, 0k reserved, 1180k data, 212k init) <7>Calibrating delay loop... 3923.96 BogoMIPS (lpj=1961984) <6>Security Framework v1.0.0 initialized <6>SELinux: Disabled at boot. <4>Mount-cache hash table entries: 256 (order: 0, 4096 bytes) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 1024K (64 bytes/line) <6>CPU 0(1) -> Node 0 <6>checking if image is initramfs... it is <6>ACPI: Looking for DSDT in initrd... not found! <4> not found! <6>Using local APIC NMI watchdog using perfctr0 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 1024K (64 bytes/line) <6>CPU 0(1) -> Node 0 <6>CPU0: AMD Opteron(tm) Processor 246 stepping 0a <6>per-CPU timeslice cutoff: 1023.86 usecs. <6>task migration cache decay timeout: 2 msecs. <6>Booting processor 1/1 rip 6000 rsp ffff8100dfd07f58 <4>Initializing CPU#1 <7>Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 1024K (64 bytes/line) <6>CPU 1(1) -> Node 1 <4>AMD Opteron(tm) Processor 246 stepping 0a <6>Total of 2 processors activated (7905.28 BogoMIPS). <6>Using local APIC timer interrupts. <6>Detected 12.464 MHz APIC timer. <6>checking TSC synchronization across 2 CPUs: passed. <6>time.c: Using PIT/TSC based timekeeping. <4>Brought up 2 CPUs <6>NET: Registered protocol family 16 <6>PCI: Using configuration type 1 <6>mtrr: v2.0 (20020519) <6>ACPI: Subsystem revision 20050211 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 *11) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT] <6>ACPI: PCI Root Bridge [PCI1] (00:08) <4>PCI: Probing PCI hardware (bus 08) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z00D._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PA._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PB._PRT] <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) <6>agpgart: Detected AMD 8151 AGP Bridge rev B3 <6>agpgart: Maximum main memory to use for agp memory: 3428M <6>agpgart: AGP aperture is 128M @ 0xf0000000 <6>PCI-DMA: Disabling IOMMU. <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ <6>audit: initializing netlink socket (disabled) <3>audit(1121110650.812:0): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>vesafb: framebuffer at 0xf8000000, mapped to 0xffffc20000100000, using 10240k, total 65536k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81978 bytes,<6>...found (1280x1024, 54169 bytes, v3). <4>Console: switching to colour frame buffer device 158x59 <6>fb0: VESA VGA frame buffer device <6>Real Time Clock Driver v1.12 <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.100 (c) Dave Jones <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker <6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>NET: Registered protocol family 2 <6>IP: routing cache hash table of 16384 buckets, 256Kbytes <4>TCP established hash table entries: 262144 (order: 10, 4194304 bytes) <4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 262144 bind 65536) <6>NET: Registered protocol family 1 <4>ACPI wakeup devices: <4>USB0 USB1 Z007 Z00A Z00B G0PA G0PB G1PA G1PB <6>ACPI: (supports S0 S1 S3 S4 S5) <4>Freeing unused kernel memory: 212k freed <5>SCSI subsystem initialized <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>AMD8111: IDE controller at PCI slot 0000:00:07.1 <6>AMD8111: chipset revision 3 <6>AMD8111: not 100% native mode: will probe irqs later <6>AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller <6> ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio <6> ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <7>Probing IDE interface ide1... <4>hdc: AOPEN COM5232/AAH, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>ACPI: PCI interrupt 0000:13:04.0[A] -> GSI 39 (level, low) -> IRQ 169 <6>ACPI: PCI interrupt 0000:13:04.1[B] -> GSI 38 (level, low) -> IRQ 177 <6>scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 <4> <Adaptec AIC7902 Ultra320 SCSI adapter> <4> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs <4> <6>scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 <4> <Adaptec AIC7902 Ultra320 SCSI adapter> <4> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs <4> <4>(scsi1:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit) <5> Vendor: SEAGATE Model: ST373307LW Rev: 0007 <5> Type: Direct-Access ANSI SCSI revision: 03 <4>scsi1:A:0:0: Tagged Queuing enabled. Depth 32 <5>SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB) <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB) <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 sda3 sda4 <4> sda1: <solaris: [s0] sda5 [s1] sda6 [s2] sda7 [s7] sda8 > <5>Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 <6>hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <5>ReiserFS: sda3: found reiserfs format "3.6" with standard journal <5>ReiserFS: sda3: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: sda3: checking transaction log (sda3) <4>reiserfs: disabling flush barriers on sda3 <5>ReiserFS: sda3: Using r5 hash to sort names <6>bootsplash: status on console 0 changed to on <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com <5>ReiserFS: sda4: found reiserfs format "3.6" with standard journal <5>ReiserFS: sda4: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: sda4: checking transaction log (sda4) <4>reiserfs: disabling flush barriers on sda4 <5>ReiserFS: sda4: Using r5 hash to sort names Kernel logging (ksyslog) stopped. Kernel log daemon terminating. 0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 0000:00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 0000:00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 03) 0000:00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:02.0 Class 0106: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) 0000:01:03.0 USB Controller: NEC Corporation USB (rev 43) 0000:01:03.1 USB Controller: NEC Corporation USB (rev 43) 0000:01:03.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0000:01:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 0000:03:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02) 0000:08:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 14) 0000:08:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 14) 0000:08:03.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:08:03.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:08:04.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:08:04.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:09:00.0 VGA compatible controller: nVidia Corporation NV18GL [Quadro4 NVS AGP 8x] (rev a2) 0000:13:04.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) 0000:13:04.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
Andi Kleen wrote:
What happens when you boot with acpi_skip_timer_override ? (in 9.3)
booting 9.3 kernel with that option does not help. Mouse movement still 'freezes/hangs' for about 1s every few seconds. eric
uname -a Linux windriver 2.6.11.4-21.7-smp #1 SMP Thu Jun 2 14:23:14 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux cat /proc/cmdline root=/dev/sda3 vga=0x31a selinux=0 splash=silent console=tty0 resume=/dev/sda2 acpi=skip-timer-override
On Mon, Jul 11, 2005 at 05:06:24PM +1000, Bernard Lineham wrote:
Hi,
We have two of the same workstations (W1100z) and we are seeing exactly the same problem as described in Mark's e-mail under Suse 9.3.? The problem also occurs under Novell Linux Desktop.? I can also add Fedora Core 4 and Ubuntu 5.04 to the list of distros that work properly.? This is definitely a compatibility issue with Suse only.
Do the other distributions work in their 64bit versions? -Andi
This hardware has no support for PS/2 keyboard/mouse. I have used both the SUN USB k/m and a microsoft USB k/m -- both have the same issue. eric Andi Kleen wrote:
On Mon, Jul 11, 2005 at 07:48:17AM -0600, Eric Whiting wrote:
64bit mandrake works fine.. eric
So do you see the problem with USB and/or with PS/2 keyboards?
-Andi
participants (4)
-
Andi Kleen -
Bernard Lineham -
Eric Whiting -
Mark Chernault