Inspecting /boot/System.map-2.6.11.4-21.7-default Loaded 21884 symbols from /boot/System.map-2.6.11.4-21.7-default. Symbols match kernel version 2.6.11. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Bootdata ok (command line is root=/dev/hda3 vga=0x317 selinux=0 splash=silent console=tty0 resume=/dev/hda2 showopts) <4>Linux version 2.6.11.4-21.7-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Thu Jun 2 14:23:14 UTC 2005 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009e000 (usable) <4> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) <4> BIOS-e820: 000000003ff60000 - 000000003ff72000 (ACPI data) <4> BIOS-e820: 000000003ff72000 - 000000003ff80000 (ACPI NVS) <4> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) <7>ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f7340 <7>ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0x000000003ff6d72b <7>ACPI: FADT (v003 SUN SUNmetro 0x06040000 PTEC 0x000f4240) @ 0x000000003ff71dfc <7>ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x000000003ff71ef0 <7>ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003ff71f80 <7>ACPI: DSDT (v001 SUN K85AE 0x06040000 MSFT 0x0100000d) @ 0x0000000000000000 <7>On node 0 totalpages: 261984 <7> DMA zone: 4096 pages, LIFO batch:1 <7> Normal zone: 257888 pages, LIFO batch:16 <7> HighMem zone: 0 pages, LIFO batch:1 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>Processor #0 15:5 APIC version 16 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 <6>ACPI: IOAPIC (id[0x02] address[0xe0000000] gsi_base[24]) <6>IOAPIC[1]: apic_id 2, version 17, address 0xe0000000, GSI 24-27 <6>ACPI: IOAPIC (id[0x03] address[0xe0001000] gsi_base[28]) <6>IOAPIC[2]: apic_id 3, version 17, address 0xe0001000, GSI 28-31 <6>ACPI: IOAPIC (id[0x04] address[0xe0500000] gsi_base[32]) <6>IOAPIC[3]: apic_id 4, version 17, address 0xe0500000, GSI 32-35 <6>ACPI: IOAPIC (id[0x05] address[0xe0501000] gsi_base[36]) <6>IOAPIC[4]: apic_id 5, version 17, address 0xe0501000, GSI 36-39 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>Setting APIC routing to flat <6>Using ACPI (MADT) for SMP configuration information <4>Checking aperture... <4>CPU 0: aperture @ e8000000 size 128 MB <4>Built 1 zonelists <4>Kernel command line: root=/dev/hda3 vga=0x317 selinux=0 splash=silent console=tty0 resume=/dev/hda2 showopts <6>bootsplash: silent mode. <4>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 131072 bytes) <6>time.c: Using 1.193182 MHz PIT timer. <6>time.c: Detected 2393.244 MHz processor. <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) <4>Memory: 1023680k/1047936k available (2167k kernel code, 23512k reserved, 1160k data, 168k init) <7>Calibrating delay loop... 4702.20 BogoMIPS (lpj=2351104) <6>Security Framework v1.0.0 initialized <6>SELinux: Disabled at boot. <4>Mount-cache hash table entries: 256 (order: 0, 4096 bytes) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 1024K (64 bytes/line) <4>CPU: AMD Opteron(tm) Processor 150 stepping 0a <6>checking if image is initramfs... it is <6>ACPI: Looking for DSDT in initrd... not found! <4> not found! <6>Using local APIC NMI watchdog using perfctr0 <6>Using local APIC timer interrupts. <6>Detected 12.464 MHz APIC timer. <6>NET: Registered protocol family 16 <6>PCI: Using configuration type 1 <6>mtrr: v2.0 (20020519) <6>ACPI: Subsystem revision 20050211 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 *11) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT] <6>ACPI: PCI Root Bridge [PCI1] (00:08) <4>PCI: Probing PCI hardware (bus 08) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z00D._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PA._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PB._PRT] <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) <6>agpgart: Detected AMD 8151 AGP Bridge rev B3 <6>agpgart: Maximum main memory to use for agp memory: 941M <6>agpgart: AGP aperture is 128M @ 0xe8000000 <6>PCI-DMA: Disabling IOMMU. <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ <6>audit: initializing netlink socket (disabled) <3>audit(1121109319.681:0): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000100000, using 6144k, total 131072k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <6>Real Time Clock Driver v1.12 <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.100 (c) Dave Jones <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker <6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>NET: Registered protocol family 2 <6>IP: routing cache hash table of 8192 buckets, 64Kbytes <4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes) <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 262144 bind 65536) <6>NET: Registered protocol family 1 <7>PM: Checking swsusp image. <7>PM: Resume from disk failed. <4>ACPI wakeup devices: <4>USB0 USB1 Z007 Z00A Z00B G0PA G0PB G1PA G1PB <6>ACPI: (supports S0 S1 S3 S4 S5) <4>Freeing unused kernel memory: 168k freed <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>AMD8111: IDE controller at PCI slot 0000:00:07.1 <6>AMD8111: chipset revision 3 <6>AMD8111: not 100% native mode: will probe irqs later <6>AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller <6> ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <4>hda: WDC WD800BB-22JHC0, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <7>Probing IDE interface ide1... <4>hdc: AOPEN COM5232/AAH PRO, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: max request size: 128KiB <6>hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) <7>Losing some ticks... checking if CPU frequency changed. <6>hda: cache flushes supported <6> hda: hda1 hda2 hda3 hda4 <6>hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <4>Attempting manual resume <7>PM: Checking swsusp image. <3>swsusp: Suspend partition has wrong signature? <7>PM: Resume from disk failed. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda3, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com <6>cdrom: open failed. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda4, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Mon Jul 11 13:15:30 2005 Master Resource Control: previous runlevel: N, switching to runlevel: 3 checkproc: /sbin/udevd 1988 Starting D-BUS daemonstartproc: execve (/usr/bin/dbus-daemon-1) [ /usr/bin/dbus-daemon-1 --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon-1 ] done Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02) eth0 configuration: eth-id-00:0a:e4:2e:45:fb eth0 (DHCP) . . checkproc: /sbin/dhcpcd 3834 . . . startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Initializing random number generatordone Starting resource managerdone no IP address yet... backgrounding. waiting Waiting for mandatory devices: eth-id-00:0a:e4:2e:45:fb 12 11 10 9 pidofproc: dhcpcd 3834 eth0 device: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02) eth0 configuration: eth-id-00:0a:e4:2e:45:fb eth0 DHCP client (dhcpcd) is running eth0 IP address: 192.168.100.208/24 doneSetting up service network . . . . . . . . . . . . . . . .done Starting syslog servicesstartproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/klogd ] done startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Importing Net File System (NFS)unused Starting nfsboot (sm-notify) done Starting sound driver: intel8x0done startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -x /usr/lib/powersave/scripts -a resmgr -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ] Starting mail service (Postfix)done loading ACPI modules (ac battery button fan processor thermal ) done Starting powersaved (accessing ACPI events over acpid) done Loading keymap qwerty/us.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable donestartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone Starting SSH daemondone Starting HAL daemonstartproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=3 PWD=/ SPLASHCFG= ROOTFS_REALDEV=/lib/klibc//dev/hda3 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/hald ] done Starting hardware scan on bootStarting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Master Resource Control: runlevel 3 has been reached Skipped services in runlevel 3: nfs killproc: kill(3334,3)