Hello, My server is getting me crazy. I installed SuSE 10.0 (64 bits) using a raid controller (Adaptec 2020SA Zero Channel) so the driver installed was "aacraid" that detected all the drives attached to the raid card with no problems and system installed smoothly. Before installing, I defined 2 raid levels on s-ata hard drives: Raid 1: disks 1 and 2 for operating system Raid 5: disks 3, 4 and 5 for data backup After one or two months I am experiencing a very strange arrays degradations. The card beeps, detects a disk failure and starts rebuilding the array, but there is no evidence of this on /var/log/messages neither /var/log/warn and hard drives seems to be O.K. I was wondering if there is any utility to check the status of the arrays under SuSE 10.0 and what are your experiences with this controller (if any). I don't know what can be happening (why arrays became degraded and why SuSE does not log anything). There is an utility application provided by the manufacturer of the board (Supermicro) to manage arrays (Adaptec Storage Manager - ASM), but not sure if can be installed on this SuSE release. It seems that uses Java and my system is console based. Any experience you could provide me are very welcome. :-) Greetings. -- Camaleón