On Mon, May 03, 2004 at 04:56:54PM -0600, Bryan Stillwell wrote:
On Mon, May 03, 2004 at 10:36:33PM +0200, Andi Kleen wrote:
On Mon, May 03, 2004 at 02:32:49PM -0600, Bryan Stillwell wrote:
I was running 2.4.21-149-smp, but now I'm using 2.4.21-211-smp after running YOU (I'm somewhat new to SuSE, so I didn't know about it). The problem is still there though... :( I'm beginning to think there's something tied in with the SCSI subsystem (it died in scsi_do_req_Rsmp once). Are you using any SCSI cards or just IDE?
The weird thing is it worked in the Rioworks board using the same SCSI card...
I would definitely try a bios update.
I've tried the latest BIOS (1.02) and even Tyan's beta BIOS referenced in their FAQ, but neither has worked. I even tried removing the SCSI card and installed on an IDE disk, but still no luck.
Did you rule out broken memory too? Does it survive 48h of memtest86? There seem to be a few problems with 2.6, but in 2.4 as far as I know near all such corruption problems were related to broken hardware/BIOS of some sort or a particular binary only graphics driver. -Andi