On Mon, May 03, 2004 at 10:36:33PM +0200, Andi Kleen wrote:
On Mon, May 03, 2004 at 02:32:49PM -0600, Bryan Stillwell wrote:
I was running 2.4.21-149-smp, but now I'm using 2.4.21-211-smp after running YOU (I'm somewhat new to SuSE, so I didn't know about it). The problem is still there though... :( I'm beginning to think there's something tied in with the SCSI subsystem (it died in scsi_do_req_Rsmp once). Are you using any SCSI cards or just IDE?
The weird thing is it worked in the Rioworks board using the same SCSI card...
I would definitely try a bios update.
I've tried the latest BIOS (1.02) and even Tyan's beta BIOS referenced in their FAQ, but neither has worked. I even tried removing the SCSI card and installed on an IDE disk, but still no luck. BTW, I've also tried both machines with the latest Fedora (Core2test3) and Mandrake (10.0rc1) without success. I was just comparing the Rioworks HDAMA motherboard specs to the Tyan K8W specs, and they're somewhat close to the same (both use AMD chipsets at least): Both have the AMD-8111 I/O Hub Both have the AMD-8131 PCI-X Tunnel The Tyan has an AMD-8151 AGP 3.0 Graphics Tunnel The Tyan has an TI TSB43AB22 IEEE 1394a PCI controller (firewire) The Rioworks has 2 Broadcom 5702 Gigabit Ethernet controllers The Tyan has 1 Broadcom BCM5703C GbE controller The Rioworks has a Super I/O PC87360 The Tyan has a Winbond W83627HF Super I/O ASIC The Rioworks has a Phoenix BIOS The Tyan has a AMI BIOS Bryan -- Aspen Systems, Inc. | http://www.aspsys.com/ Production Engineer | Phone: (303)431-4606 bryans@aspsys.com | Fax: (303)431-7196