Mailinglist Archive: opensuse (1355 mails)

< Previous Next >
Re: [opensuse] Limiting the battery charge on a laptop permanently plugged on
On 2018-06-18 16:48, Greg Freemyer wrote:
Ah:

+++---------------
Do charge thresholds work even when Linux/TLP is not running?

Yes. The charging process is not controlled by software, but by
hardware. TLP just writes the thresholds to the hardware registers (via
tp-smapi or tpacpi-bat). Once stored in the hardware the charge
thresholds stay effective permanently. See below for removal.
---------------++-

In that case, as a workaround boot to Windows anytime you need to set
it to full charge or back to 60%.

Not the best solution, but not too bad.

I removed the original hard disk, a 500GB rust unit, and replaced with a
250GB SSD with only Linux installed.

I bought an external empty USB3 in which to place the original disk; I
hope Windows can boot from it.

--
Cheers / Saludos,

Carlos E. R.
(from 42.3 x86_64 "Malachite" at Telcontar)

< Previous Next >
Follow Ups