Mailinglist Archive: opensuse (1352 mails)

< Previous Next >
[opensuse] Black display on media server
  • From: "Carlos E. R." <robin.listas@xxxxxxxxxxxxxx>
  • Date: Sun, 3 Jun 2018 15:55:32 +0200 (CEST)
  • Message-id: <alpine.LSU.2.21.1806031433340.13021@Telcontar.valinor>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1



Hi,

I have an sporadic problem with my media server, currently running Leap 42.3. Typically it is running kodi full screen (on XFCE desktop). I leave it running on the night (it is also server for other things full time), so I just power off the display.

Well, sometimes when I power back on the display it remains "dark grey", ie, black with backlight on; there is some signal, but it is black. No response to keyboard at all, that I can see. Most times I can not switch to console text mode. I can do ssh from another machine, tasks are running. I kill kodi if it still there, kill the screen saver, "chvt 1", "init 3"... nothing works, the display does not respond. I have no resource but reboot the server.

I suspect that Kodi has crashed but not fully exited, not restored the display it grabs (full screen mode).

There is a kodi_crashlog-20180602_042251.log

The machine was halted 2018-06-02 12:22:19+02:00, then rebooted 2018-06-02
12:25:10+02:00, so it matches with the kodi crashlog stamp above.

These are the message log entries:

<10.6> 2018-06-02T04:20:03.895923+02:00 Isengard CRON 11695 - -
pam_unix(crond:session): session closed for user root
<3.6> 2018-06-02T04:20:03.910927+02:00 Isengard systemd 1 - - Stopping User
Manager for UID 0...
<3.6> 2018-06-02T04:20:03.912456+02:00 Isengard systemd 11696 - - Stopped
target Default.
<3.6> 2018-06-02T04:20:03.913310+02:00 Isengard systemd 11696 - - Reached
target Shutdown.
<3.6> 2018-06-02T04:20:03.947854+02:00 Isengard systemd 11696 - - Starting
Exit the Session...
<3.6> 2018-06-02T04:20:03.948525+02:00 Isengard systemd 11696 - - Stopped
target Basic System.
<3.6> 2018-06-02T04:20:03.949085+02:00 Isengard systemd 11696 - - Stopped
target Paths.
<3.6> 2018-06-02T04:20:03.950964+02:00 Isengard systemd 11696 - - Stopped
target Sockets.
<3.6> 2018-06-02T04:20:03.952677+02:00 Isengard systemd 11696 - - Stopped
target Timers.
<3.6> 2018-06-02T04:20:03.976307+02:00 Isengard systemd 11696 - - Received
SIGRTMIN+24 from PID 11724 (kill).
<10.6> 2018-06-02T04:20:03.981000+02:00 Isengard systemd - - -
pam_unix(systemd-user:session): session closed for user root
<3.6> 2018-06-02T04:20:03.987756+02:00 Isengard systemd 1 - - Stopped User
Manager for UID 0.
<3.6> 2018-06-02T04:20:03.989619+02:00 Isengard systemd 1 - - Removed slice
User Slice of root.
<16.6> 2018-06-02T04:22:31.384900+02:00 Isengard WatchDog - - - WatchDog MARK!
Status: Router 1 (F/T 0/52) Google 1 (F/T 0/9) Rebooting 0 Reboots 0
<0.2> 2018-06-02T04:22:51.616991+02:00 Isengard systemd-coredump 11774 - -
Process 12610 (kodi.bin) of user 1000 dumped core. <=======================
<10.6> 2018-06-02T04:25:01.915324+02:00 Isengard cron 11863 - -
pam_unix(crond:session): session opened for user root by (uid=0)
<3.6> 2018-06-02T04:25:01.930260+02:00 Isengard systemd 1 - - Created slice
User Slice of root.
<3.6> 2018-06-02T04:25:01.951911+02:00 Isengard systemd 1 - - Starting User
Manager for UID 0...
<3.6> 2018-06-02T04:25:01.957613+02:00 Isengard systemd 1 - - Started Session
3628 of user root.
<10.6> 2018-06-02T04:25:01.966595+02:00 Isengard systemd - - -
pam_unix(systemd-user:session): session opened for user root by (uid=0)


Then there are only routine cron or timer related entries till I try to use the machine next morning.

These is the coredump:

Sat 2018-06-02 04:22:51 CEST 12610 1000 100 6 * /usr/lib64/kodi/kodi.bin
Sat 2018-06-02 12:21:11 CEST 3690 1000 100 11 *
/usr/lib64/libexec/kdeconnectd
Sat 2018-06-02 12:21:14 CEST 24530 1000 100 11 * /usr/lib64/firefox/firefox
Sat 2018-06-02 12:21:15 CEST 23478 1000 100 11 * /usr/lib64/firefox/firefox
Sat 2018-06-02 12:21:18 CEST 23526 1000 100 11 * /usr/lib64/firefox/firefox
Sat 2018-06-02 12:21:29 CEST 23553 1000 100 11 * /usr/lib64/firefox/firefox

Oh, I see some more coredumps that day, but as the machine was halted at
12:22:19+02:00, they are not relevant.

Why kdeconnectd was running, I do not know, the desktop is XFCE. It is running this instant, too. I don't know what it does. Ah, it connects to android phones... WTF is it running on XFCE?




Ideas to investigate next time the display crash happens? - it is not even every week.


Some information on the hardware:

Isengard:~ # hwinfo --bios --chipcard --dvb --framebuffer --gfxcard --monitor
--vbe
01: None 00.0: 10105 BIOS
[Created at bios.186]
Unique ID: rdCR.lZF+r4EgHp4
Hardware Class: bios
BIOS Keyboard LED Status:
Scroll Lock: off
Num Lock: off
Caps Lock: off
SMBIOS Version: 2.8
BIOS Info: #0
Vendor: "American Megatrends Inc."
Version: "EB120IMS.820"
Date: "03/03/2016"
Start Address: 0xf0000
ROM Size: 6656 kB
Features: 0x0d03000000013f8b9880
PCI supported
BIOS flashable
BIOS shadowing allowed
CD boot supported
Selectable boot supported
BIOS ROM socketed
EDD spec supported
1.2MB Floppy supported
720kB Floppy supported
2.88MB Floppy supported
Print Screen supported
8042 Keyboard Services supported
Serial Services supported
Printer Services supported
ACPI supported
USB Legacy supported
BIOS Boot Spec supported
System Info: #1
Manufacturer: "Micro-Star International Co., Ltd."
Product: "MS-B120"
Version: "1.0"
Serial: "MSB120G7S0105312"
UUID: undefined, but settable
Wake-up: 0x06 (Power Switch)
Board Info: #2
Manufacturer: "Micro-Star International Co., Ltd."
Product: "MS-B120"
Version: "1.0"
Serial: "To be filled by O.E.M."
Asset Tag: "To be filled by O.E.M."
Type: 0x0a (Motherboard)
Features: 0x09
Hosting Board
Replaceable
Location: "To be filled by O.E.M."
Chassis: #3
Chassis Info: #3
Manufacturer: "Micro-Star International Co., Ltd."
Version: "To Be Filled By O.E.M."
Serial: "To Be Filled By O.E.M."
Asset Tag: "To Be Filled By O.E.M."
Type: 0x0d (All in One)
Bootup State: 0x03 (Safe)
Power Supply State: 0x03 (Safe)
Thermal State: 0x03 (Safe)
Security Status: 0x03 (None)
Port Connector: #8
Type: 0x0e (Mouse Port)
Internal Designator: "J1A1"
External Designator: "PS2Mouse"
External Connector: 0x0f (PS/2)
Port Connector: #9
Type: 0x0d (Keyboard Port)
Internal Designator: "J1A1"
External Designator: "Keyboard"
External Connector: 0x0f (PS/2)
Port Connector: #10
Type: 0xff (Other)
Internal Designator: "J2A1"
External Designator: "TV Out"
External Connector: 0x1d (Mini-Centronics Type-14)
Port Connector: #11
Type: 0x09 (Serial Port 16550A Compatible)
Internal Designator: "J2A2A"
External Designator: "COM A"
External Connector: 0x08 (DB-9 pin male)
Port Connector: #12
Type: 0x1c (Video Port)
Internal Designator: "J2A2B"
External Designator: "Video"
External Connector: 0x07 (DB-15 pin female)
Port Connector: #13
Type: 0x10 (USB)
Internal Designator: "J3A1"
External Designator: "USB1"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #14
Type: 0x10 (USB)
Internal Designator: "J3A1"
External Designator: "USB2"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #15
Type: 0x10 (USB)
Internal Designator: "J3A1"
External Designator: "USB3"
External Connector: 0x12 (Access Bus [USB])
Port Connector: #16
Type: 0xff (Other)
Internal Designator: "J9A1 - TPM HDR"
Internal Connector: 0xff (Other)
Port Connector: #17
Type: 0xff (Other)
Internal Designator: "J9C1 - PCIE DOCKING CONN"
Internal Connector: 0xff (Other)
Port Connector: #18
Type: 0xff (Other)
Internal Designator: "J2B3 - CPU FAN"
Internal Connector: 0xff (Other)
Port Connector: #19
Type: 0xff (Other)
Internal Designator: "J6C2 - EXT HDMI"
Internal Connector: 0xff (Other)
Port Connector: #20
Type: 0xff (Other)
Internal Designator: "J3C1 - GMCH FAN"
Internal Connector: 0xff (Other)
Port Connector: #21
Type: 0xff (Other)
Internal Designator: "J1D1 - ITP"
Internal Connector: 0xff (Other)
Port Connector: #22
Type: 0xff (Other)
Internal Designator: "J9E2 - MDC INTPSR"
Internal Connector: 0xff (Other)
Port Connector: #23
Type: 0xff (Other)
Internal Designator: "J9E4 - MDC INTPSR"
Internal Connector: 0xff (Other)
Port Connector: #24
Type: 0xff (Other)
Internal Designator: "J9E3 - LPC HOT DOCKING"
Internal Connector: 0xff (Other)
Port Connector: #25
Type: 0xff (Other)
Internal Designator: "J9E1 - SCAN MATRIX"
Internal Connector: 0xff (Other)
Port Connector: #26
Type: 0xff (Other)
Internal Designator: "J9G1 - LPC SIDE BAND"
Internal Connector: 0xff (Other)
Port Connector: #27
Type: 0xff (Other)
Internal Designator: "J8F1 - UNIFIED"
Internal Connector: 0xff (Other)
Port Connector: #28
Type: 0xff (Other)
Internal Designator: "J6F1 - LVDS"
Internal Connector: 0xff (Other)
Port Connector: #29
Type: 0xff (Other)
Internal Designator: "J2F1 - LAI FAN"
Internal Connector: 0xff (Other)
Port Connector: #30
Type: 0xff (Other)
Internal Designator: "J2G1 - GFX VID"
Internal Connector: 0xff (Other)
Port Connector: #31
Type: 0xff (Other)
Internal Designator: "J1G6 - AC JACK"
Internal Connector: 0xff (Other)
System Slot: #32
Designation: "J6B2"
Type: 0xa5 (Other)
Bus Width: 0x0d (Other)
Status: 0x04 (In Use)
Length: 0x04 (Long)
Slot ID: 0
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #33
Designation: "J6B1"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 1
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #34
Designation: "J6D1"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 2
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #35
Designation: "J7B1"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 3
Characteristics: 0x010c (3.3 V, Shared, PME#)
System Slot: #36
Designation: "J8B4"
Type: 0xa5 (Other)
Bus Width: 0x08 (Other)
Status: 0x04 (In Use)
Length: 0x03 (Short)
Slot ID: 4
Characteristics: 0x010c (3.3 V, Shared, PME#)
On Board Devices: #37
Video: "To Be Filled By O.E.M."
OEM Strings: #38
To Be Filled By O.E.M.
System Config Options (Jumpers & Switches) #39:
To Be Filled By O.E.M.
Physical Memory Array: #40
Use: 0x03 (System memory)
Location: 0x03 (Motherboard)
Slots: 2
Max. Size: 8 GB
ECC: 0x03 (None)
Memory Array Mapping: #41
Memory Array: #40
Partition Width: 2
Start Address: 0x0000000000000000
End Address: 0x0000000200000000
Memory Device: #42
Location: "A1_DIMM0"
Bank: "A1_BANK0"
Manufacturer: "Kingston"
Serial: "0618FCE3"
Asset Tag: "A1_AssetTagNum0"
Part Number: "99U5469-041.A00LF"
Memory Array: #40
Form Factor: 0x09 (DIMM)
Type: 0x18 (Other)
Type Detail: 0x0004 (Unknown)
Data Width: 64 bits
Size: 4 GB
Speed: 1600 MHz
Memory Device Mapping: #43
Memory Device: #42
Array Mapping: #41
Interleave Pos: 1
Interleaved Depth: 2
Start Address: 0x0000000000000000
End Address: 0x0000000100000000
Memory Device: #44
Location: "A1_DIMM1"
Bank: "A1_BANK1"
Manufacturer: "Kingston"
Serial: "082FEA49"
Asset Tag: "A1_AssetTagNum1"
Part Number: "99U5469-041.A00LF"
Memory Array: #40
Form Factor: 0x09 (DIMM)
Type: 0x18 (Other)
Type Detail: 0x0004 (Unknown)
Data Width: 64 bits
Size: 4 GB
Speed: 1600 MHz
Memory Device Mapping: #45
Memory Device: #44
Array Mapping: #41
Interleave Pos: 2
Interleaved Depth: 2
Start Address: 0x0000000100000000
End Address: 0x0000000200000000
Type 32 Record: #46
Data 00: 20 14 2e 00 00 00 00 00 00 00 00 00 00 00 00 00
Data 10: 00 00 00 00
Type 41 Record: #47
Data 00: 29 0b 2f 00 01 83 01 00 00 00 10
String 1: "Onboard IGD"
Type 41 Record: #48
Data 00: 29 0b 30 00 01 85 01 00 00 00 c8
String 1: "Onboard LAN"
Type 41 Record: #49
Data 00: 29 0b 31 00 01 81 01 00 00 03 e2
String 1: "Onboard 1394"
Cache Info: #50
Designation: "CPU Internal L1"
Level: L1
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x01 (Other)
Associativity: 0x01 (Other)
Max. Size: 224 kB
Current Size: 224 kB
Supported SRAM Types: 0x0002 (Unknown)
Current SRAM Type: 0x0002 (Unknown)
Cache Info: #51
Designation: "CPU Internal L2"
Level: L2
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x05 (Unified)
Associativity: 0x08 (16-way Set-Associative)
Max. Size: 2048 kB
Current Size: 2048 kB
Supported SRAM Types: 0x0002 (Unknown)
Current SRAM Type: 0x0002 (Unknown)
Processor Info: #52
Socket: "SOCKET 0"
Socket Type: 0x24 (Other)
Socket Status: Populated
Type: 0x03 (CPU)
Family: 0x0b (Pentium)
Manufacturer: "Intel"
Version: "Intel(R) Pentium(R) CPU N3710 @ 1.60GHz"
Asset Tag: "Fill By OEM"
Part Number: "Fill By OEM"
Processor ID: 0xbfebfbff000406c4
Status: 0x01 (Enabled)
Voltage: 1.2 V
External Clock: 80 MHz
Max. Speed: 2400 MHz
Current Speed: 1600 MHz
L1 Cache: #50
L2 Cache: #51
Language Info: #53
Languages: en|US|iso8859-1
Current: en|US|iso8859-1
Type 143 Record: #54
Data 00: 8f 10 36 00 00 01 02 03 04 05 06 07 08 09 0a 0b
String 1: "GOP1-[8.0.1035]"
String 2: "RAID-13.1.0.2126"
String 3: "PXEU1-v2.021"
String 4: "AMI-AptioV"
String 5: "N/A"
String 6: "N/A"
String 7: "N/A"
String 8: "N/A"
String 9: "N/A"
String 10: "N/A"
String 11: "N/A"
String 12: "N/A"
Type 144 Record: #55
Data 00: 90 05 37 00 01
String 1: "$INT15SWIDd0b1"
Config Status: cfg=no, avail=yes, need=no, active=unknown

08: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.378]
Unique ID: _Znp.qslZ+SExVcE
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Device Name: "Onboard IGD"
Model: "Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated
Graphics Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x22b1 "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated
Graphics Controller"
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd. [MSI]"
SubDevice: pci 0xb120
Revision: 0x35
Driver: "i915"
Driver Modules: "i915"
Memory Range: 0x80000000-0x80ffffff (rw,non-prefetchable)
Memory Range: 0x90000000-0x9fffffff (ro,non-prefetchable)
I/O Ports: 0xf000-0xf03f (rw)
IRQ: 119 (15106350 events)
Module Alias: "pci:v00008086d000022B1sv00001462sd0000B120bc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=no, avail=yes, need=no, active=unknown

21: None 00.0: 10002 LCD Monitor
[Created at monitor.125]
Unique ID: rdCR.RysAyeVxkx7
Parent ID: _Znp.qslZ+SExVcE
Hardware Class: monitor
Model: "SAMSUNG T22C350"
Vendor: SAM "SAMSUNG"
Device: eisa 0x0ab9 "T22C350"
Resolution: 720x400@70Hz
Resolution: 640x480@60Hz
Resolution: 640x480@67Hz
Resolution: 640x480@72Hz
Resolution: 640x480@75Hz
Resolution: 800x600@60Hz
Resolution: 800x600@72Hz
Resolution: 800x600@75Hz
Resolution: 832x624@75Hz
Resolution: 1024x768@60Hz
Resolution: 1024x768@70Hz
Resolution: 1024x768@75Hz
Resolution: 1280x1024@75Hz
Resolution: 1152x864@75Hz
Resolution: 1280x720@60Hz
Resolution: 1280x1024@60Hz
Resolution: 1366x768@60Hz
Resolution: 1920x1080@60Hz
Size: 477x268 mm
Year of Manufacture: 2012
Week of Manufacture: 52
Detailed Timings #0:
Resolution: 1920x1080
Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync
Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync
Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz
Year of Manufacture: 2012
Week of Manufacture: 52
Detailed Timings #1:
Resolution: 1366x768
Horizontal: 1366 1436 1579 1792 (+70 +213 +426) +hsync
Vertical: 768 771 774 798 (+3 +6 +30) +vsync
Frequencies: 85.50 MHz, 47.71 kHz, 59.79 Hz
Driver Info #0:
Max. Resolution: 1920x1080
Vert. Sync Range: 24-75 Hz
Hor. Sync Range: 15-81 kHz
Bandwidth: 148 MHz
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #8 (VGA compatible controller)
Isengard:~ #


- -- Cheers

Carlos E. R.
(from 42.2 x86_64 "Malachite" at Telcontar)


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iEYEARECAAYFAlsT81QACgkQtTMYHG2NR9Wj/wCfb7YGPrWrBiENuAS7kBgmqabJ
TA8An1/RyKMlVwyrTcQEBuRV5tgoQYBG
=swZP
-----END PGP SIGNATURE-----

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups